UUPAS Portable High Frequency Facial Machine (Model U02) Instruction Manual

1. Safety Information

Please read all instructions carefully before using the UUPAS High Frequency Facial Machine. Retain this manual for future reference.

• Do not use if you are pregnant, have a pacemaker, heart disease, epilepsy, or any metal implants.
• Avoid using on broken skin, open wounds, or areas with severe inflammation.
• Keep the device and glass tubes dry. Do not use in wet environments or with wet hands.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the device. Contact customer support if issues arise.
• Always ensure the glass tube is securely inserted before turning on the device.
• Do not stay on one spot for more than 10 seconds during operation to prevent skin irritation.
• If you experience any discomfort, discontinue use immediately.

2. Product Overview

The UUPAS Portable High Frequency Facial Machine (Model U02) utilizes high-frequency technology with both Neon (orange glow) and Argon (purple glow) gas-filled glass tubes. This device is designed for various skin applications.

Included Components:

• 1 High Frequency Wand with Power Plug
• 1 Mushroom Tube (Argon)
• 1 Comb Tube (Argon)
• 1 Y-shape Tube (Argon)
• 1 Bent Tube (Neon)
• 1 Tongue Tube (Neon)
• 1 Tungsten Tube (Neon)
• 1 User Manual

Image: The UUPAS High Frequency Facial Wand and its six interchangeable glass tubes.

Image: Diagram showing the principle of high frequency technology using Neon and Argon gases.

3. Setup

Follow these steps to prepare your device for use:

1. Unboxing: Carefully remove all components from the packaging. Inspect for any damage.
2. Tube Installation: Select the desired glass tube. Gently insert the bottom end of the tube into the wand handle. Ensure it is inserted steadily and firmly, without wobbling. Do not force the tube.
3. Power Connection: Plug the power cord into a suitable electrical outlet.

Image: Visual guide for inserting a glass tube into the wand and adjusting the power level.

4. Operating Instructions

The UUPAS High Frequency Facial Machine offers adjustable intensity levels and various application methods. It is recommended to use the device 2-3 times per week.

General Usage Steps:

1. Preparation: Ensure your skin is clean and dry before use.
2. Tube Selection: Choose the appropriate glass tube for the area you intend to treat (refer to 'Tube Descriptions' below).
3. Insertion: Insert the chosen glass tube firmly into the wand handle.
4. Power On & Adjustment: Turn the power switch to activate the device. Slowly adjust the intensity level from low to high according to your comfort and skin sensitivity.
5. Initial Contact: Before applying to the skin, touch the glass tube with your hand to feel and adapt to the appropriate strength.
6. Application: Gently move the glass tube over the desired area. Do not keep the tube on the same spot for more than 10 seconds.
7. Completion: After use, turn off the power switch and unplug the device. Carefully remove the glass tube.

Image: Visual guide for testing the tube strength and beginning treatment.

Tube Descriptions:

The kit includes 6 glass tubes, each designed for specific areas and purposes. Tubes with a purple glow use Argon gas, while those with an orange glow use Neon gas.

• Mushroom Tube (Argon): Suitable for broader areas like cheeks, forehead, and chin.
• Comb Tube (Argon): Designed for scalp and hair application.
• Y-shape Tube (Argon): Ideal for neck, arms, and knee areas.
• Bent Tube (Neon): Best for narrow crevices, such as around the eyes and nose.
• Tongue Tube (Neon): Suitable for use around the eyes or nose.
• Tungsten Tube (Neon): For forehead and other wider areas.

Image: Depicts the Mushroom, Comb, and Y-shape glass tubes, which utilize Argon technology (purple glow).

Image: Depicts the Bent, Tongue, and Tungsten glass tubes, which utilize Neon technology (orange glow).

Image: Visual comparison of skin conditions before and after consistent use of the high frequency device.

5. Maintenance

Proper maintenance ensures the longevity and effectiveness of your device.

• Cleaning Tubes: After each use, gently wipe the glass tubes with a soft cloth dampened with rubbing alcohol or an antiseptic solution. Allow them to air dry completely before storing.
• Cleaning Wand: Wipe the wand handle with a clean, dry cloth. Do not immerse the wand in water or any liquids.
• Storage: Store the device and all glass tubes in their original packaging or a protective case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure tubes are stored safely to prevent breakage.
• Handle with Care: Glass tubes are fragile. Handle them gently during insertion, removal, and cleaning.

6. Troubleshooting

If you encounter any issues, refer to the following common solutions:

Image: Explains why the high frequency light may not be visible in bright environments and suggests using it in the dark.

Image: Provides a tip for making the tube color more obvious by using the device in a dark environment.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please contact UUPAS customer service directly. Refer to the contact details provided in your product packaging or visit the official UUPAS website.