UPBRIGHT Hyper Tough HT AQ75072G 8V Drill Power

User Manual for UpBright AC/DC Adapter

Brand: UPBRIGHT

Model: Hyper Tough HT AQ75072G 8V Drill Power

1. Product Overview

This UpBright AC/DC Adapter is designed to provide reliable power for various compatible devices, including Hyper Tough cordless drills and EOBAR Power chargers. It features robust safety protections to ensure stable and secure operation.

UpBright AC/DC Adapter

Figure 1: The UpBright AC/DC Adapter, a compact black power supply unit with a connected DC barrel connector cable.

2. Setup and Connection

To set up your UpBright AC/DC Adapter, follow these steps:

  1. Verify Compatibility: Ensure your device requires a 9V DC input and has a compatible barrel connector. This adapter is specifically designed for Hyper Tough AQ75072G, AQ75046G 8-Volt Cordless Drills, and EOBAR Power EBS0075C-0900500AUA, Hyper Tough HT06-0900500U chargers.
  2. Connect to Device: Insert the barrel connector of the adapter firmly into the power input port of your device.
  3. Plug into Power Outlet: Plug the AC prongs of the adapter into a standard 100-240VAC, 50/60Hz wall outlet. The adapter is designed for worldwide input voltage.
  4. Power On: Once connected, your device should begin charging or power on, depending on its function.
Compatible Hyper Tough Drills

Figure 2: Examples of compatible Hyper Tough 8-Volt cordless drills and their battery specifications, illustrating the types of devices this adapter powers.

3. Operating Instructions

The UpBright AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable 9V DC output for charging or powering your equipment.

  • Charging: For devices with rechargeable batteries (e.g., cordless drills), the adapter will initiate the charging process. Monitor your device's charging indicator if available.
  • Direct Power: For devices that operate directly from AC power, the adapter will supply continuous power.
  • Safety Features: The adapter incorporates Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard both the adapter and your connected device from electrical anomalies.
Advanced Power Management Chips

Figure 3: An illustrative view of the adapter's internal components, highlighting the advanced power management chips and various protection features like short-circuit, over-temp, over-voltage, and overcurrent protection.

4. Maintenance and Care

To ensure the longevity and optimal performance of your UpBright AC/DC Adapter, observe the following maintenance guidelines:

  • Keep Dry: Avoid exposing the adapter to moisture or liquids.
  • Clean Gently: Use a dry, soft cloth to clean the exterior of the adapter. Do not use harsh chemicals or abrasive cleaners.
  • Proper Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Handle with Care: Do not drop, disassemble, or attempt to repair the adapter. Refer to qualified personnel for service.
  • Ventilation: Ensure the adapter has adequate ventilation during operation to prevent overheating.

5. Troubleshooting

If you encounter issues with your UpBright AC/DC Adapter, consider the following troubleshooting steps:

ProblemPossible CauseSolution
Device not powering on/charging
  • Loose connection
  • Incompatible device
  • Faulty power outlet
  • Damaged adapter/cable
  • Ensure all connections are secure.
  • Verify device compatibility with the adapter's specifications.
  • Test the power outlet with another device.
  • Inspect the adapter and cable for visible damage. If damaged, discontinue use.
Adapter feels hot during use
  • Normal operation (slight warmth)
  • Overload or poor ventilation
  • A slight warmth is normal.
  • Ensure adequate ventilation around the adapter. Disconnect if excessively hot and allow to cool.

If problems persist after following these steps, please contact customer support.

6. Specifications

FeatureDetail
Product Dimensions3 x 2 x 2 inches
Item Weight2.39 ounces
Input Voltage100-240VAC, 50/60Hz
Output Voltage9V DC, 500mA (0.5A)
Connectivity TechnologyPowerline
Connector TypeBarrel Connector
Special FeatureShort Circuit Protection, Over Voltage Protection, Over Current Protection
Included Components1 x AC Adapter
Compatible DevicesHyper Tough AQ75072G 8-Volt Max Cordless Drill, Hyper Tough AQ75046G 8-Volt Max Cordless Drill, EOBAR Power EBS0075C-0900500AUA Charger, Hyper Tough HT06-0900500U 9.0V 500mA Class 2 Power Supply

7. Warranty Information

UpBright products are designed for reliability and performance. This AC/DC Adapter comes with the following warranty:

  • 30 Days Refund: If you are not satisfied with your purchase, you may be eligible for a refund within 30 days.
  • 24 Months Exchange: The product is covered by a 24-month exchange policy for manufacturing defects.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official UpBright warranty documentation or contact customer support.

UpBright Limited Warranty Certificate

Figure 4: An image depicting a "Limited Warranty Certificate" and a "Product Warranty" seal, indicating the product's coverage.

8. Customer Support

For further assistance, technical support, or warranty inquiries, please contact UpBright customer service. You can also visit the official UpBright store for more information and product resources.

Official UpBright Store: Visit Store

© 2025 UPBRIGHT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.