Introduction
This manual provides instructions for the proper use and care of WICKED Colors W017 High Gloss White paint. WICKED Colors are professional-grade airbrush paints designed for various surfaces, offering excellent adhesion and durability. This specific product is a 60 ml bottle of high-gloss white paint.
For optimal results, please read these instructions thoroughly before use.
Setup
1. Preparation of Paint
- Shake Well: Before each use, vigorously shake the WICKED Colors W017 bottle for at least one minute to ensure pigments are thoroughly mixed.
- Thinning: WICKED Colors are ready for airbrush use with a 0.5mm or larger tip. For smaller tip sizes (0.3mm or finer) or for increased transparency, thin the paint with WICKED Reducer (W500) or 4011 Reducer. Start with a 10% reducer ratio and adjust as needed.
- Surface Preparation: Ensure the surface to be painted is clean, dry, and free of dust, grease, or other contaminants. For best adhesion, lightly scuff smooth surfaces with fine-grit sandpaper.
Image: A sample of the high-gloss white finish achieved with WICKED Colors W017. This illustrates the smooth, reflective quality of the paint.
Operating
1. Airbrush Settings
- Air Pressure: Recommended air pressure ranges from 20-30 PSI (pounds per square inch) for general applications. Adjust pressure based on paint consistency, airbrush nozzle size, and desired spray pattern.
- Spray Distance: Maintain a consistent distance from the surface, typically 2-6 inches, to achieve an even coat and prevent overspray or pooling.
2. Application Techniques
- Light Coats: Apply multiple thin coats rather than one thick coat. This prevents runs, improves adhesion, and allows for better control over opacity.
- Drying Time: Allow each coat to dry to the touch before applying the next. Drying time varies depending on humidity, temperature, and coat thickness.
- Curing: For maximum durability, allow the paint to fully cure. Curing times can range from 24 hours to several days, depending on environmental conditions and film thickness. Heat curing (e.g., 15 minutes at 150°F / 65°C) can accelerate the process for certain substrates.
Maintenance
1. Airbrush Cleaning
- Immediate Cleaning: Clean your airbrush immediately after each use. Do not allow paint to dry inside the airbrush.
- Cleaning Solution: Use Createx Airbrush Cleaner or a suitable water-based cleaner. Flush the airbrush with cleaner until no paint residue is visible.
- Disassembly: Periodically disassemble your airbrush for a thorough cleaning of all components, especially the nozzle and needle.
2. Paint Storage
- Seal Tightly: Always seal the paint bottle tightly after use to prevent drying and contamination.
- Temperature: Store paint in a cool, dry place, away from direct sunlight and extreme temperatures. Do not allow paint to freeze.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clogging / Poor Flow | Paint too thick, dried paint in nozzle, insufficient air pressure. | Thin paint with reducer, clean airbrush thoroughly, increase air pressure. |
| Uneven Spray Pattern | Damaged needle/nozzle, inconsistent spray distance, paint too thin/thick. | Inspect and replace damaged parts, maintain consistent distance, adjust paint consistency. |
| Poor Adhesion | Improper surface preparation, paint applied too thick, insufficient curing. | Clean and scuff surface, apply thin coats, allow adequate curing time. |
Specifications
- Brand: Createx
- Product Name: WICKED Colors High Gloss White
- Model Number: amz-cwc-0017-60
- Finish Type: High-Gloss
- Item Volume: 60 Milliliters (2.03 Fluid Ounces)
- UPC: 717893200171
- Manufacturer: Createx Wicked
- Package Dimensions: 5.91 x 1.97 x 1.97 inches
- Item Weight: 3.53 ounces
Warranty Information
This product is covered by the standard manufacturer's warranty provided by Createx. For specific details regarding warranty coverage, duration, and claims process, please refer to the official Createx website or contact their customer support directly. Keep your purchase receipt as proof of purchase.
Support
For further assistance, technical questions, or product inquiries, please visit the official Createx website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
Website: www.createxcolors.com