Introduction
This manual provides instructions for the assembly, operation, and maintenance of your Sauder Cannery Bridge L-Shaped Desk. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and longevity of your product.
Safety Information
California Proposition 65 Warning:
Formaldehyde – www.p65warnings.ca.gov
Always follow all assembly instructions carefully. Ensure all fasteners are securely tightened before use. Do not overload drawers or desk surfaces. Keep small parts away from children during assembly.
Package Contents
Your Sauder Cannery Bridge L-Shaped Desk package includes:
- All necessary engineered wood panels for the L-shaped desk structure.
- Six drawer components with full extension slides.
- Hardware kit (screws, dowels, cam locks, etc.).
- Cord management system components, including desktop grommet holes.
- Assembly instructions (this manual).
Please verify all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, contact Sauder customer support.
Setup and Assembly
Assembly is required for this product. It is recommended that two people assemble the desk due to its size and weight (approximately 204.6 pounds). Assembly tools are not included.
- Preparation: Clear a spacious area for assembly. Lay out all components and hardware. Keep the included instructions handy.
- Tools Required: Basic household tools such as a screwdriver (Phillips head recommended) and possibly a hammer are typically needed. A power drill can expedite the process but use with caution to avoid overtightening.
- Follow Manufacturer's Instructions: Refer to the detailed step-by-step assembly guide provided in your product packaging. Each step will illustrate how to connect specific panels and install hardware.
- Drawer Assembly: Assemble the six drawers, ensuring the full extension slides are correctly installed for smooth operation.
- Desk Top Installation: Carefully attach the L-shaped desktop, aligning the cord management grommet holes.
- Final Checks: Once assembled, ensure all screws and fasteners are tight. The desk is designed to be finished on all sides for versatile placement.
Image: The Sauder Cannery Bridge L-Shaped Desk in Sindoori Mango finish, showcasing its overall design with six drawers and herringbone pattern on the desktop.
Image: The L-shaped desk positioned in a home office, demonstrating its functional use with a laptop, lamp, and decorative items.
Image: A diagram illustrating the dimensions of the L-shaped desk: 65.95" W x 65.98" D x 29.76" H.
Operating Instructions
The Sauder Cannery Bridge L-Shaped Desk is designed for efficient and organized workspace use.
- Drawer Usage: The desk features six drawers with full extension slides. The two lower drawers are designed to accommodate letter or legal-size hanging files. Use these for document organization. The upper drawers are suitable for smaller office supplies.
- Cord Management: Utilize the integrated cord management system and desktop grommet holes to route and organize power cords and cables for your electronic devices. This helps maintain a tidy and safe workspace.
- Surface Use: The spacious desktop surface can hold computers, monitors, lamps, and other office essentials. The herringbone pattern adds a decorative element.
Image: A close-up view of the desk's Sindoori Mango finish desktop, highlighting the distinctive herringbone pattern and a cord grommet hole.
Image: The L-shaped desk with several drawers partially open, revealing storage space for office supplies and files.
Image: An interior view of the desk drawers, showing organized storage for pens, scissors, notepads, and other small items.
Maintenance
To ensure the longevity and appearance of your desk, follow these maintenance guidelines:
- Cleaning: Wipe the desk surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or damage to the engineered wood.
- Drawer Slides: Periodically check drawer slides for smooth operation. If they become stiff, a small amount of silicone lubricant can be applied.
- Fasteners: Occasionally check and tighten any loose screws or fasteners to maintain structural integrity.
Troubleshooting
If you encounter any issues with your Sauder Cannery Bridge L-Shaped Desk, consider the following:
- Wobbly Desk: Ensure all assembly fasteners are securely tightened. Check that the desk is placed on a level surface.
- Sticking Drawers: Verify that the drawer slides are correctly installed and free of obstructions. Ensure the drawers are not overloaded.
- Missing Parts: If you discover missing parts during assembly, refer to the "Warranty and Support" section to contact Sauder customer service.
For further assistance, please contact Sauder customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Sauder |
| Model Name | Cannery Bridge |
| Model Number | 429556 |
| Product Dimensions (D x W x H) | 65.98"D x 65.95"W x 29.76"H |
| Color | Sindoori Mango |
| Base Material | Engineered Wood |
| Finish Type | Warm Finish |
| Special Feature | 6 Drawers, Cord Management System, Desktop Grommet Holes |
| Number of Drawers | 6 |
| Drawer Type | File Drawer (lower two), Storage Drawers |
| Drawer Glide Mechanism | Ball-bearing or ball-race slides |
| Item Weight | 204.6 Pounds |
| Maximum Weight Recommendation | 107.2 Pounds (for desktop) |
| Required Assembly | Yes |
| Recommended Number of People for Assembly | 2 |
| Product Care Instructions | Wipe with Dry Cloth |
Warranty and Support
Warranty: Your Sauder Cannery Bridge L-Shaped Desk is covered by a 5-year limited warranty. This warranty covers manufacturing defects and ensures lasting peace of mind. Please retain your proof of purchase.
Customer Support: For assistance with assembly, missing parts, or any other inquiries, please contact Sauder customer service:
- Website: sauder.com/service
- Phone: 800-523-3987
Image: Sauder's customer service information, including website and phone number.
