1. Introduction
Thank you for choosing the Outsunny 60L Portable Electric Cooler. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and keep it for future reference.
This portable electric cooler is designed for versatile use, offering efficient cooling and freezing capabilities for various environments, including home, car, camping, and travel. It features a powerful compressor, an intuitive LED touch display, and multiple power options for convenience.
Figure 1.1: Outsunny Portable Electric Cooler in a camping setting.
2. Safety Information
To ensure safe operation, please observe the following precautions:
- Always ensure the power supply matches the voltage specified on the cooler's rating label.
- Do not operate the cooler if the power cord is damaged or if the appliance shows signs of malfunction.
- Keep the cooler away from heat sources and direct sunlight to maintain optimal performance.
- Ensure adequate ventilation around the cooler, especially around the vents, to prevent overheating.
- Do not immerse the cooler in water or expose it to heavy rain.
- Avoid placing corrosive materials or liquids inside the cooler.
- When using in a vehicle, secure the cooler to prevent movement during transit.
- Unplug the cooler before cleaning or performing any maintenance.
3. Product Components
The Outsunny 60L Portable Electric Cooler includes several features designed for convenience and functionality:
- Main Unit: The insulated body with compressor and cooling system.
- LED Touch Display: For temperature control and mode selection.
- Removable Internal Basket: Helps organize contents and facilitates cleaning.
- Built-in LED Light: Illuminates the interior for easy visibility.
- Drain Plug: For easy water drainage after use or cleaning.
- Integrated Cutting Board: Conveniently located on the lid for food preparation.
- Cup Holders: Two recessed cup holders on the lid.
- Corner Protectors: Durable protectors on the corners for added resilience.
- Retractable Handle: For easy pulling and transport.
- Large Wheels: Two robust wheels for effortless mobility.
- USB Charging Port: A slow-charging USB port for small electronic devices.
- AC Adapter (2m): For household power outlets (110-240V).
- DC Power Cable (2.5m): For vehicle power outlets (12V/24V).
Figure 3.1: Key internal and external features of the cooler.
Figure 3.2: Cooler being moved with its retractable handle and wheels.
4. Setup
4.1 Unpacking and Initial Placement
- Carefully remove the cooler from its packaging.
- Inspect the cooler for any damage that may have occurred during shipping. If damage is found, do not operate the unit and contact customer support.
- Place the cooler on a flat, stable surface. If the cooler was transported horizontally, allow it to stand upright for at least 24 hours before plugging it in. This allows the refrigerant to settle.
- Ensure there is sufficient space around the cooler (at least 10 cm) for proper ventilation, especially around the air inlets and outlets.
4.2 Power Connection
The cooler can be powered by both AC (household) and DC (vehicle) power sources.
- AC Power (110-240V): Use the provided 2m AC adapter. Connect the adapter to the cooler's AC input port, then plug the other end into a standard wall outlet.
- DC Power (12V/24V): Use the provided 2.5m DC power cable. Connect the cable to the cooler's DC input port, then plug the other end into your vehicle's cigarette lighter socket or 12V/24V power outlet.
Note: Do not connect both AC and DC power simultaneously. The cooler will automatically prioritize AC power if both are connected.
Figure 4.1: AC and DC power adapters.
5. Operating Instructions
5.1 Powering On/Off
After connecting to a power source, press and hold the Power Button (usually a circle with a vertical line) on the LED touch display to turn the cooler on or off.
5.2 Temperature Adjustment
Use the + and - buttons on the LED display to set the desired temperature. The temperature range is typically from -20°C to +20°C (-4°F to +68°F).
5.3 Cooling Modes (MAX/ECO)
Press the Settings Button (usually a gear icon) to cycle between cooling modes:
- MAX Mode: Provides rapid cooling for quick temperature reduction. This mode consumes more power (approx. 60W).
- ECO Mode: An energy-saving mode that operates with lower power consumption (approx. 40W), ideal for maintaining temperature over longer periods.
5.4 Fahrenheit/Celsius Switch
Press and hold the Settings Button for a few seconds to switch the temperature display between Celsius (°C) and Fahrenheit (°F).
5.5 Battery Protection System
The cooler features a 3-level dynamic battery protection system to prevent your vehicle's battery from draining. When the DC voltage drops below a preset value, the cooler will automatically shut off. You can typically adjust these levels (H/M/L for High/Medium/Low protection) via the settings menu to suit your battery type and usage.
5.6 USB Charging Port
A slow-charging USB port is available on the control panel for charging small electronic devices (e.g., smartphones). Note that this port provides a standard low-power output.
Figure 5.1: LED Touch Display and USB Port.
Figure 5.2: Refrigerator and Freezer Modes.
6. Maintenance
6.1 Cleaning
- Always unplug the cooler before cleaning.
- Wipe the interior and exterior surfaces with a damp cloth and a mild detergent.
- Do not use abrasive cleaners, harsh chemicals, or sharp objects, as these can damage the surfaces.
- Use the drain plug at the bottom of the cooler to easily remove any melted ice or cleaning water.
- Ensure the cooler is completely dry before storing or reconnecting to power.
6.2 Storage
When not in use for extended periods:
- Clean the cooler thoroughly.
- Leave the lid slightly ajar to prevent odors and mildew growth.
- Store the cooler in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your cooler, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cooler does not turn on | No power supply; Damaged power cord; Vehicle battery low. | Check power connection; Replace damaged cord; Recharge vehicle battery or adjust battery protection level. |
| Cooler not cooling efficiently | Poor ventilation; Lid not closed properly; Ambient temperature too high; Overloaded with warm items. | Ensure vents are clear; Close lid securely; Pre-cool items before placing them in the cooler; Operate in MAX mode. |
| Display shows an error code | Internal sensor fault; Compressor issue. | Turn off and restart the cooler. If the error persists, contact customer support. |
| Unusual noise | Cooler not level; Fan obstruction; Normal compressor operation. | Ensure cooler is on a flat surface; Check for obstructions around the fan; Some compressor noise is normal. |
If the problem persists after attempting these solutions, please contact Outsunny customer support for assistance.
8. Specifications
Detailed specifications for the Outsunny 60L Portable Electric Cooler:
Figure 8.1: Key Product Specifications.
Figure 8.2: Cooler Dimensions and Capacity Examples.
| Feature | Detail |
|---|---|
| Model Number | C00-034V93 |
| Capacity | 60 Liters |
| Dimensions (L x W x H) | 71.1 cm x 46 cm x 57.1 cm |
| Weight | 18.7 kg |
| Minimum Temperature | -20°C (-4°F) |
| Power Consumption (Average) | 60W (MAX Mode), 40W (ECO Mode) |
| Input Voltage | AC 110-240V, DC 12V/24V |
| Material | PP, HDPE (Exterior), Polystyrene Foam (Insulation) |
| Max Supported Weight (on lid) | 150 kg |
| Special Features | Energy Saving, Portable, Practical, LED Display, Battery Protection |
9. Warranty and Support
9.1 Warranty Information
This Outsunny product comes with a three-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
9.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact Outsunny customer support. Have your model number (C00-034V93) and proof of purchase ready when contacting support.
You can typically find contact information on the Outsunny brand website or through your retailer's customer service portal.