Introduction
The Satisfyer G-Spot Flex 3 is designed for targeted G-spot and clitoral stimulation, featuring innovative shape-memory technology. Its flexible shaft contains a malleable wire, allowing users to customize the device's angle for personalized internal massage. This manual provides essential information for the safe and effective use, maintenance, and care of your Satisfyer G-Spot Flex 3.
Product Features
- G-Spot Stimulator: The voluminous shaft with a rounded tip is designed to stimulate the G-spot, while the flexible neck allows for individual adjustment of the stimulation angle.
- Flexible Shape: An internal wire enables bending of the flexible shaft, transforming the device for simultaneous G-spot and clitoral stimulation.
- 12 Vibration Settings: Equipped with two powerful motors, the device offers 12 distinct vibration settings for varied experiences.
- Body-Friendly Silicone: Constructed from body-friendly silicone for comfort and ease of cleaning.
- Waterproof (IPX7): Rated IPX7 waterproof, suitable for use in the shower or bath, protected against immersion in water up to 1 meter deep for up to 30 minutes.
Image: The Satisfyer G-Spot Flex 3 Vibrator in its standard form.
Image: Diagram highlighting key features of the Satisfyer G-Spot Flex 3, including its ergonomic shape, flexible design, vibration controls, smooth body-friendly silicone, and magnetic charging connection.
Image: The Satisfyer G-Spot Flex 3 demonstrating its flexible shaft, showing how it can be adjusted.
Setup
Initial Charging
Before first use, fully charge your Satisfyer G-Spot Flex 3. Connect the magnetic USB charging cable to the charging contacts on the device and plug the USB end into a suitable power source (e.g., computer USB port, USB wall adapter). The indicator light will show charging status. A full charge typically takes approximately 2-3 hours.
Image: Rear view of the Satisfyer G-Spot Flex 3, showing the magnetic charging contacts.
First Use Preparation
Before the first use and after each subsequent use, clean the device thoroughly with warm water and a mild toy cleaner or antibacterial soap. Rinse well and allow to air dry completely.
Operating Instructions
Power On/Off
- To turn on: Press and hold the power button (usually the central button with the Satisfyer logo) for 2-3 seconds.
- To turn off: Press and hold the power button for 2-3 seconds until the vibrations stop.
Adjusting Vibration Settings
- Once powered on, press the '+' button to increase vibration intensity or cycle through patterns.
- Press the '-' button to decrease vibration intensity or cycle through patterns in reverse.
- The device offers 12 distinct vibration programs. Experiment to find your preferred settings.
Utilizing the Flexible Shaft
The G-Spot Flex 3 features a bendable shaft with shape-memory technology. Gently bend the shaft to your desired angle or curve. The internal wire will hold the shape, providing firm and consistent pressure for targeted G-spot stimulation or broader internal massage. You can reshape it as needed during use.
Image: The Satisfyer G-Spot Flex 3 with its shaft bent into a curved position, demonstrating its adaptability.
Video: Official product video demonstrating the features and flexibility of the Satisfyer G-Spot Flex 3, including its various vibration modes and bendable design.
Maintenance and Care
Cleaning
Always clean your Satisfyer G-Spot Flex 3 before and after each use. Use warm water and a mild, pH-balanced toy cleaner or antibacterial soap. Rinse thoroughly to remove all soap residue. The device is IPX7 waterproof, allowing for easy cleaning under running water.
Storage
Store the device in a clean, dry place away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent material degradation or discoloration.
Troubleshooting
- Device not turning on: Ensure the device is fully charged. If it still doesn't turn on, try connecting it to the charger again to confirm the connection.
- Vibrations are weak: The battery might be low. Recharge the device.
- Charging issues: Ensure the magnetic charging cable is securely connected to both the device and the power source. Try a different USB port or wall adapter.
- Unusual noise or smell: Discontinue use immediately and contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 1.32 x 1.36 x 7.68 inches; 2.86 ounces |
| Item Model Number | 4043814 |
| Batteries | 1 Lithium Ion battery required (included) |
| Material | Silicone |
| Color | Red |
| Waterproof Rating | IPX7 |
Warranty and Support
The Satisfyer G-Spot Flex 3 comes with a 15-year guarantee, ensuring long-lasting satisfaction and product reliability. For any questions, concerns, or support needs regarding your device, please refer to the contact information provided with your product packaging or visit the official Satisfyer website for customer service details.
