1. Product Overview
The ANTARI MB-1 Mobile Fogger is a compact, battery-powered fog machine designed for portability and quick operation. It is ideal for various professional and recreational applications requiring instant fog effects. This manual provides essential information for the safe and efficient use of your MB-1 fogger.
Figure 1.1: ANTARI MB-1 Mobile Fogger with included accessories, including the fogger unit, battery, charger, fog fluid, and carrying case.
Figure 1.2: The MB-1 Mobile Fogger and its components neatly stored within the custom-fitted carrying case, demonstrating its portability and protection.
2. Setup
Follow these steps to set up your ANTARI MB-1 Mobile Fogger for first use:
- Unpack the Unit: Carefully remove all components from the packaging. Verify that all items listed in the packing list are present.
- Charge the Battery: Connect the provided AC adapter to the battery and a power outlet. Allow the battery to fully charge before initial use. The charging indicator will typically change color or turn off when charging is complete.
- Fill the Fluid Tank: Unscrew the cap of the fluid tank located on the top of the fogger unit. Carefully pour Antari fog liquid into the tank, ensuring not to overfill. Securely replace the cap. The tank capacity is 0.11 liters.
- Insert the Battery: Locate the battery compartment on the fogger unit. Insert the charged battery, ensuring it clicks securely into place.
- Optional Remote Connection: If using an optional wired remote control, connect it to the designated port on the fogger. For wireless remote control, ensure the receiver is properly paired according to its separate instructions.
Figure 2.1: A detailed view of the ANTARI MB-1 Mobile Fogger unit, highlighting the fluid tank cap and general design.
3. Operating Instructions
Once set up, operating the MB-1 fogger is straightforward:
- Power On: Locate the main power switch on the unit and switch it to the 'ON' position.
- Warm-up: The unit will begin its warm-up cycle. The MB-1 features a rapid warm-up time of approximately 1 second. A status indicator light will typically signal when the unit is ready for operation.
- Generate Fog:
- On-Device Control: Press and hold the dedicated fog button on the unit to produce fog. Release the button to stop.
- Wired Remote (Optional): Use the button on the wired remote control to activate fog output.
- Wireless Remote (Optional): Use the designated button on the wireless remote to control fog output.
- Monitor Fluid Level: Keep an eye on the fluid level indicator to ensure you do not run out of fog liquid during operation. Continuous operation with an empty tank can damage the pump.
- Power Off: After use, switch the main power button to the 'OFF' position.
Figure 3.1: Side view of the ANTARI MB-1 Mobile Fogger, showing the output nozzle and control interface.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your MB-1 fogger:
- Fluid Tank Cleaning: Periodically empty and rinse the fluid tank with distilled water, especially if storing the unit for extended periods or switching fluid types.
- Nozzle Cleaning: If the fog output appears weak or inconsistent, the nozzle may be partially clogged. Consult a qualified technician for cleaning or use a manufacturer-approved cleaning solution.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Store the battery in a cool, dry place when not in use and charge it periodically if stored for long durations.
- Exterior Cleaning: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or allow liquids to enter internal components.
- Storage: Store the fogger in its original carrying case in a dry, dust-free environment. Ensure the fluid tank is empty or filled with fresh, approved fog fluid before storage.
5. Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No fog output | Unit not powered on; No fluid in tank; Clogged nozzle; Battery low/dead. | Check power switch; Refill fluid tank; Clean nozzle (professional service recommended); Charge/replace battery. |
| Weak fog output | Low fluid level; Partially clogged nozzle; Incorrect fluid type. | Refill fluid; Clean nozzle; Use only Antari approved fog fluid. |
| Unit not warming up | Power issue; Internal fault. | Ensure battery is charged and properly inserted; Contact customer support if issue persists. |
| Remote control not working | Remote battery dead; Remote not paired; Remote out of range (wireless). | Replace remote battery; Re-pair remote; Move closer to unit. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Antari customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Power Consumption | 75 W |
| Power Supply | 10-240 V AC, 50/60 Hz 12 V |
| IP Classification | IP20 |
| Warm-up Time | Approx. 1 second |
| Tank Capacity | 0.11 L (fog liquid) |
| Liquid Consumption | Approx. 1.1 ml/min |
| Control Options | Wireless remote (optional), Wired remote (optional), On/off switch on device |
| Housing Color | Black |
| Dimensions (W x D x H) | 6.6 cm x 22.8 cm x 11.2 cm |
| Weight | 4.45 kg |
| Battery Type | X 12 V cable |
| Model Number | 154-51701926 |
7. Warranty and Support
Antari products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Antari website. For technical support, spare parts, or service inquiries, please contact your authorized Antari dealer or Antari customer service directly. Please have your product model number (MB-1) and serial number ready when contacting support.
