Pro-Ject E1 Turntable User Manual

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject E1 turntable. Please read these instructions carefully before using your device to ensure optimal performance and longevity.

2. Safety Instructions

• Always handle the turntable with care. Avoid dropping or subjecting it to strong vibrations.
• Keep the device away from water, moisture, and direct sunlight.
• Ensure the turntable is placed on a stable, level surface to prevent skipping and damage.
• Disconnect the power supply before cleaning or performing any maintenance.
• Do not attempt to open the turntable casing or perform unauthorized repairs. Refer all servicing to qualified personnel.
• Use only the power supply provided with the unit.

3. Package Contents

Verify that all items are present in the package:

• Pro-Ject E1 Turntable
• Universal Power Supply
• RCA Cable
• Dust Cover
• Felt Mat

4. Setup

4.1 Unpacking and Placement

Carefully remove all components from the packaging. Place the turntable on a firm, level surface, away from direct heat sources or strong vibrations. Ensure adequate ventilation around the unit.

Image 1: The Pro-Ject E1 turntable in black, showcasing its sleek design and main components. This image provides an overview of the assembled unit.

4.2 Assembly

While the Pro-Ject E1 is designed for 'Plug & Play' convenience, some minor assembly is required. The tracking force and anti-skating are pre-adjusted at the factory. Follow these steps:

1. Platter Installation: Carefully place the main platter onto the spindle.
2. Belt Installation: Gently stretch the drive belt around the motor pulley and the inner rim of the platter.
3. Felt Mat: Place the felt mat on top of the platter.
4. Dust Cover: Attach the dust cover to the hinges at the rear of the plinth.

Image 2: A diagram illustrating the key components of the Pro-Ject E1 turntable, including the aluminium tonearm, composite wood plinth, electronic speed switch, high-quality MM cartridge, and three feet. This helps in identifying parts during assembly.

4.3 Connecting to an Audio System

Connect the supplied RCA cable from the turntable's output to the appropriate input on your amplifier or receiver. If your amplifier does not have a dedicated 'Phono' input, you will need an external phono preamplifier.

4.4 Power Connection

Connect the universal power supply to the turntable's power input and then plug it into a suitable wall outlet.

5. Operating Instructions

5.1 Powering On/Off

The turntable is powered on when connected to the mains. There is no separate power switch. The motor starts when you select a speed.

5.2 Speed Selection

The Pro-Ject E1 features an electronic speed switch. Use the switch located on the plinth to select between 33 RPM and 45 RPM, depending on the record you are playing.

5.3 Playing a Record

1. Place a record on the platter.
2. Select the correct playback speed (33 or 45 RPM) using the electronic speed switch.
3. Lift the tonearm using the cueing lever.
4. Carefully position the stylus over the desired starting groove of the record.
5. Lower the tonearm gently using the cueing lever. The stylus will descend onto the record, and playback will begin.

Image 3: A hand carefully placing a vinyl record onto the platter of the Pro-Ject E1 turntable, demonstrating the initial step of playing music.

5.4 Stopping Playback

1. Lift the tonearm using the cueing lever.
2. Return the tonearm to its rest.
3. Remove the record from the platter.
4. Close the dust cover to protect the turntable.

5.5 Dust Cover Usage

The acrylic dust cover protects your turntable from dust and debris. It can be opened and closed using the adjustable hinges. For optimal sound quality, it is recommended to play records with the dust cover open or removed.

6. Maintenance

6.1 Cleaning the Turntable

Regularly clean the turntable with a soft, dry, anti-static cloth. Avoid using cleaning sprays or solvents, as they may damage the finish. For the dust cover, use a soft, lint-free cloth and a mild acrylic cleaner if necessary.

6.2 Stylus Care

The stylus is a delicate component. Use a soft stylus brush to gently clean the stylus tip from back to front. Never use your fingers or harsh chemicals. A dirty or worn stylus can damage your records and degrade sound quality. Replace the stylus when it shows signs of wear.

Image 4: A close-up view of the Ortofon OM5e cartridge and stylus, highlighting the delicate nature of the component responsible for reading vinyl grooves. Proper care of this part is crucial for sound quality.

7. Troubleshooting

If you encounter issues with your Pro-Ject E1 turntable, consult the following common problems and solutions:

• No Power: Ensure the power supply is securely connected to both the turntable and the wall outlet.
• No Sound: Check all RCA cable connections between the turntable and your amplifier. Verify that the correct input is selected on your amplifier and that the volume is turned up. Confirm that your amplifier has a phono input or that an external phono preamplifier is in use.
• Skipping or Distortion: Ensure the turntable is on a stable, level surface. Check the stylus for dirt or damage. Verify that the record is clean and free of scratches.
• Incorrect Speed: Confirm that the electronic speed switch is set to the correct RPM (33 or 45) for the record being played.

If problems persist, please contact your authorized Pro-Ject dealer or customer support for assistance.

8. Specifications

9. Warranty and Support

Your Pro-Ject E1 turntable is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, service, or warranty claims, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems website for contact information.