FILIYANO Arc Floor Lamp Instruction Manual

1. Introduction

Thank you for choosing the FILIYANO Arc Floor Lamp. This manual provides essential information for the safe assembly, operation, and maintenance of your new lamp. Please read these instructions thoroughly before use and retain them for future reference.

2. Important Safety Instructions

• Ensure the power supply is disconnected before assembly, cleaning, or bulb replacement.
• This lamp is designed for indoor use only. Do not expose it to moisture or outdoor elements.
• Use only bulbs with an E26 base and a maximum wattage of 60W. Exceeding the maximum wattage may cause overheating and damage.
• Do not operate the lamp with a damaged cord or plug. If damaged, contact customer support for assistance.
• Keep the lamp away from flammable materials.
• Ensure the base is placed on a stable, level surface to prevent tipping. The heavy marble base is designed for stability, but proper placement is crucial.
• Do not attempt to modify or disassemble the lamp beyond the instructions provided in this manual.

3. Package Contents

Please verify that all components are present before beginning assembly:

• 1 x Arc Floor Lamp (disassembled components)
• 1 x Instruction Manual (this document)
• 1 x Accessories Kit (includes any necessary tools or small parts)

4. Assembly Instructions

Follow these steps to assemble your FILIYANO Arc Floor Lamp. It is recommended to assemble the lamp on a soft, clean surface to prevent scratches.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out and identify each component.
2. Attach Base: Connect the main pole section to the heavy marble base. Ensure it is securely tightened. The base includes a widened metal tray for enhanced stability.
3. Assemble Pole Sections: Connect the remaining pole sections, including the adjustable height section and the curved arc arm. Gently twist and tighten each section until secure. Ensure the electrical cord passes freely through the pole sections.
4. Attach Lampshade: Secure the metal lampshade to the end of the arc arm. Ensure it is firmly attached.
5. Install Bulb: Insert an E26 base bulb (not included) into the lamp socket. Do not exceed 60W.
6. Position Lamp: Place the assembled lamp in your desired location, ensuring the heavy marble base is stable.

Figure 4.1: Overview of lamp components and features, including adjustable height (67-77 inches), 14-inch marble base, and foot switch.

Figure 4.2: Detail of the stable marble base with a widened metal tray.

5. Operating Instructions

5.1 Powering On/Off

Plug the lamp into a standard 120V electrical outlet. Use the convenient pedal switch located on the power cord to turn the lamp on or off with your foot.

Figure 5.1: The pedal foot switch for easy operation.

5.2 Adjusting Height

The lamp's height is adjustable between 67 inches (minimum) and 77 inches (maximum). To adjust, loosen the knob on the main pole, slide the upper section to the desired height, and then tighten the knob securely to lock it in place.

Figure 5.2: The adjustable height mechanism.

5.3 Adjusting Lamp Arm and Head

The lamp features a 360° rotatable light pole, allowing you to direct light across your room. Additionally, the lampshade can be adjusted 180° vertically and 360° horizontally to achieve the perfect lighting angle and avoid direct glare.

Figure 5.3: Rotatable lamp arm and adjustable lampshade.

5.4 Bulb Selection

The lamp is compatible with standard E26 base bulbs, up to a maximum of 60W. You can choose different bulb types (e.g., LED, incandescent, CFL) and color temperatures to create various lighting effects and atmospheres in your space.

Figure 5.4: Examples of different bulb types and their effects.

6. Maintenance and Care

6.1 Cleaning

Before cleaning, ensure the lamp is unplugged from the power outlet. Use a soft, dry cloth to wipe down the lamp's surfaces. Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish.

6.2 Bulb Replacement

Always unplug the lamp before replacing the bulb. Allow the old bulb to cool completely before touching it. Unscrew the old bulb and screw in a new E26 base bulb, ensuring it does not exceed 60W.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact FILIYANO customer service directly. Contact details can typically be found on the manufacturer's website or through your purchase platform.