1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your EASEMO LED Touch Table Lamp LT-T6. Please read this manual thoroughly before use and retain it for future reference.
The EASEMO LED Touch Table Lamp LT-T6 is designed to provide versatile lighting with its dimmable warm white light and dynamic RGB color-changing capabilities. Its intuitive touch control allows for easy adjustment of brightness and color to suit various environments and moods.
Image 1.1: EASEMO LED Touch Table Lamp LT-T6, showcasing its cylindrical design and gold base.
2. Package Contents
Verify that all items are present and in good condition upon unpacking.
- EASEMO LED Touch Table Lamp LT-T6
- Power Adapter (Corded Electric)
- Instruction Manual
Note: The lamp does not contain an internal battery and requires continuous power via the included adapter.
3. Product Overview
Key Features:
- Sensitive Touch Control: Easy operation for power, brightness, and color changes.
- 3-Level Warm White Light: Adjustable brightness (soft, medium, bright) for various needs like napping, reading, or working.
- RGB Color Changing: Automatic cycle transformation of 256 RGB color spectrum. Tap to select and fix a preferred color.
- 360° Light Panel: Provides gentle, flicker-free illumination, designed to protect eyes from fatigue.
- Durable Construction: Made with safe ABS material and a metal base.
Image 3.1: Demonstration of the lamp's sensitive touch control feature.
4. Setup
- Unpack: Carefully remove the lamp and all components from the packaging.
- Placement: Place the lamp on a stable, flat surface such as a bedside table, desk, or TV cabinet. Ensure it is away from direct heat sources or moisture.
- Connect Power: Insert the power adapter into the lamp's power input port, typically located at the back or base. Plug the other end of the adapter into a standard 120V AC electrical outlet.
- Initial Power On: Once plugged in, the lamp is ready for operation.
5. Operating Instructions
5.1 Power On/Off
- To Turn On: Lightly tap any metal part of the lower edge of the lamp's body.
- To Turn Off: Lightly tap the metal part again.
5.2 Adjusting Warm White Light Brightness
When the lamp is in warm white light mode:
- Tap the metal part of the lamp's body to cycle through three brightness levels: Soft, Medium, and Bright.
- The soft light is suitable for low-light environments or as a night light.
- The brighter settings are suitable for reading or general illumination.
Image 5.1: The lamp providing warm white light in a bedroom setting.
5.3 RGB Color Changing Mode
To activate and control the RGB color changing feature:
- Long Press: When the lamp is on, long press the metal part of the lamp's body for approximately 3 seconds to switch from warm white light mode to RGB color changing mode. The lamp will begin to cycle through 256 colors automatically.
- Select Color: While in RGB color changing mode, tap the metal part to pause the color cycle and fix the current color.
- Resume Cycle: Tap the metal part again to resume the automatic color cycle.
- Return to Warm White: Long press the metal part again for approximately 3 seconds to switch back to warm white light mode.
Image 5.2: The lamp demonstrating its adjustable RGB color capabilities.
6. Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the lamp's surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
- Storage: If storing the lamp for an extended period, unplug it and store it in a cool, dry place, away from direct sunlight and moisture.
- Bulb Replacement: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the lamp to replace bulbs.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. | Ensure the power adapter is securely plugged into both the lamp and a working electrical outlet. |
| Touch control is unresponsive. | Interference or improper touch. | Ensure your hand is clean and dry. Try touching a different part of the metal base. Disconnect and reconnect power to reset. |
| RGB colors are not changing or stuck. | Incorrect mode or temporary glitch. | Long press the metal part to ensure you are in RGB cycling mode. Tap to select a color, tap again to resume cycling. If issue persists, unplug and replug the lamp. |
| Light flickers. | Unstable power supply. | Try plugging the lamp into a different electrical outlet. Ensure the power adapter is not damaged. |
8. Specifications
| Feature | Specification |
|---|---|
| Model | LT-T6 |
| Brand | EASEMO |
| Dimensions | 3.9"D x 3.9"W x 8.2"H |
| Weight | 1.65 pounds |
| Light Source Type | LED |
| Wattage | 7.2 watts |
| Brightness | 450 Lumen |
| Color Temperature (Warm White) | 3100 Kelvin |
| Color Rendering Index (CRI) | 80.00 |
| Control Method | Touch |
| Power Source | Corded Electric |
| Voltage | 120 Volts (AC) |
| Material | Metal (Base), ABS (Body) |
| Indoor/Outdoor Usage | Indoor |
9. Warranty and Support
EASEMO products are manufactured with quality and reliability in mind. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official EASEMO website.
Please retain your purchase receipt as proof of purchase for any warranty claims.
