ROIDMI EVE PLUS Robot Vacuum and Mop Cleaner

1. Introduction

The ROIDMI EVE PLUS is an advanced robot vacuum and mop cleaner designed to provide comprehensive floor cleaning with minimal effort. Featuring a 3L self-empty station, powerful 2700Pa suction, and intelligent LiDAR navigation, it offers a hands-free cleaning experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your ROIDMI EVE PLUS to ensure optimal performance and longevity.

2. Product Overview

Familiarize yourself with the components and key features of your ROIDMI EVE PLUS.

2.1 Main Unit and Self-Empty Station

Figure 2.1: ROIDMI EVE PLUS Robot Vacuum and Self-Empty Station.

The main unit is the circular robot vacuum, equipped with sensors, brushes, and a mopping system. The self-empty station serves as both a charging dock and an automatic dust collection point, significantly reducing the frequency of manual dustbin emptying.

Figure 2.2: ROIDMI EVE PLUS Robot Vacuum and Mop Cleaner with Self-Empty Station.

2.2 Key Features

• 3L Self-Empty Station: Automatically empties the robot's dustbin, holding up to 45 days of debris. Features ozone technology for odor elimination.
• 2-in-1 Vacuum and Mopping: Simultaneous vacuuming and mopping with a 250ml water tank.
• 2700Pa Max Suction: Powerful suction for effective removal of dust, hair, and debris.
• LiDAR Navigation: Advanced mapping and navigation for efficient and thorough cleaning paths.
• Multi-Floor Mapping: Stores maps for multiple levels of your home.
• Personalized Cleaning: Customize cleaning schedules, zones, and no-go areas via the app.
• Long Run-Time: Up to 250 minutes of cleaning on a single charge with a 5200mAh battery.
• App & Voice Control: Control via ROIDMI/Mijia app, Amazon Alexa, and Google Assistant.

Figure 2.3: The 3L self-empty station with disposable dust bag for hands-free disposal.

Figure 2.4: The robot offers three water output modes for different floor types and cleaning needs.

Figure 2.5: The TOF Edge Cleaning Sensor ensures precise cleaning along walls and edges.

Figure 2.6: The advanced LDS LiDAR system provides higher cleaning efficiency and better route planning.

3. Setup Guide

Follow these steps for initial setup of your ROIDMI EVE PLUS.

1. Unpack the Device: Carefully remove all components from the packaging. Ensure all protective films and packing materials are removed from the robot and the self-empty station.
2. Place the Self-Empty Station: Choose a location for the self-empty station that is against a wall, with at least 0.5 meters of clear space on both sides and 1.5 meters in front. Ensure it is on a hard, flat surface and connected to a power outlet.
3. Install Side Brushes: Attach the side brushes to the corresponding slots on the underside of the robot until they click into place.
4. Initial Charging: Place the robot onto the self-empty station. Ensure the charging contacts align. The robot will automatically begin charging. For first use, fully charge the robot.
5. Download the App: Scan the QR code in the quick start guide or search for "ROIDMI" or "Mijia" in your app store (Google Play Store or Apple App Store). Download and install the app.
6. Connect to Wi-Fi: Open the app and follow the on-screen instructions to add your ROIDMI EVE PLUS and connect it to your home Wi-Fi network. This enables smart features and remote control.

4. Operating Instructions

Learn how to control and utilize the various cleaning functions of your robot vacuum.

4.1 Starting and Stopping Cleaning

• Start Cleaning: Press the power button on the robot or use the "Start Cleaning" option in the app. The robot will begin mapping and cleaning.
• Pause/Resume: Press the power button once during cleaning to pause. Press again to resume.
• Return to Dock: Press and hold the power button for 3 seconds, or select "Return to Dock" in the app. The robot will return to the self-empty station.

4.2 App Control Features

The ROIDMI/Mijia app provides extensive control and customization options:

• Real-time Mapping: View the robot's real-time cleaning path and mapped areas.
• Zone Cleaning: Draw specific areas on the map for the robot to clean.
• No-Go Zones/Virtual Walls: Set virtual boundaries to restrict the robot from entering certain areas.
• Scheduled Cleaning: Set daily or weekly cleaning schedules for specific rooms or the entire house.
• Suction Power Adjustment: Adjust suction levels (Quiet, Standard, Strong, Max) based on cleaning needs.
• Water Output Adjustment: Control the water flow for mopping (Low, Medium, High).

Figure 4.1: Customize your cleaning plan with zone cleaning and virtual walls using the app.

4.3 Voice Control

The ROIDMI EVE PLUS is compatible with Amazon Alexa and Google Assistant. Link your ROIDMI account in the respective smart home app to enable voice commands.

• "Alexa, ask Robot Cleaner to start cleaning."
• "Hey Google, tell Robot Cleaner to return to the charging dock."

Figure 4.2: Control your robot vacuum using the ROIDMI App, Amazon Alexa, or Google Assistant.

4.4 Mopping Function

To use the mopping function, fill the water tank and attach the mopping pad. The robot will automatically switch to mopping mode when the water tank is installed. Ensure to remove the water tank and empty it after each mopping session to prevent odors and mold.

5. Maintenance

Regular maintenance ensures your ROIDMI EVE PLUS operates efficiently and extends its lifespan.

5.1 Self-Empty Station Dust Bag Replacement

The 3L dust bag in the self-empty station can hold up to 45 days of debris. The station will indicate when the bag is full. To replace:

1. Open the top cover of the self-empty station.
2. Carefully remove the full dust bag.
3. Insert a new dust bag, ensuring it is properly seated.
4. Close the top cover.

5.2 Robot Dustbin and Filter Cleaning

Even with the self-empty station, it is recommended to periodically check and clean the robot's internal dustbin and filter.

• Remove the dustbin from the robot.
• Empty debris into a trash can.
• Remove the HEPA filter and tap it gently to dislodge dust. Do not wash the HEPA filter with water.
• Clean the dustbin with a dry cloth.
• Reinstall the filter and dustbin.

5.3 Main Brush and Side Brush Cleaning

Hair and debris can get tangled in the brushes, affecting cleaning performance.

• Remove the main brush cover and the main brush. Use the cleaning tool to cut and remove tangled hair.
• Remove the side brushes and clean any tangled hair or debris. Reinstall them securely.

5.4 Sensor Cleaning

Wipe all sensors (cliff sensors, wall sensor, charging contacts) with a clean, dry cloth to ensure proper navigation and charging.

5.5 Water Tank and Mopping Pad Maintenance

• After each mopping session, empty any remaining water from the tank.
• Remove and wash the mopping pad. Allow it to air dry completely before reattaching or storing.

6. Troubleshooting

If you encounter issues with your ROIDMI EVE PLUS, refer to the common problems and solutions below.

For issues not listed here or if solutions do not resolve the problem, please contact ROIDMI customer support.

7. Specifications

8. Warranty and Support

ROIDMI provides considerate after-sales service for its products. If you encounter any problems or have suggestions, please feel free to contact their customer service team. They aim to respond within 24 hours.

For further assistance, visit the official ROIDMI store or support channels:

• ROIDMI Official Store on Amazon