Kraus KWD110-50MBL
Contents
KRAUS WasteGuard 1/2 HP Ultra-Quiet Garbage Disposal User Manual
Model: KWD110-50MBL
Product Overview
The KRAUS WasteGuard Garbage Disposal is designed for efficient and quiet food waste disposal in your kitchen. Featuring a high-speed 3800 RPM 1/2 Horsepower motor, it provides instant power for reliable grinding. Its continuous-feed operation helps reduce food waste volume, contributing to environmental sustainability. Constructed with durable stainless steel components and ABS housing, this unit is built for lasting quality. The EZLock mounting assembly ensures a straightforward installation process. Safety features include a motor-saving shut-off technology to prevent damage from blockages, and an anti-vibration system for quiet operation. It fits standard 3 1/2 inch drain openings and comes complete with a power cord, sink drain stopper, and flange.

Figure 1: KRAUS WasteGuard 1/2 HP Ultra-Quiet Garbage Disposal. This image shows the main unit of the garbage disposal, highlighting its compact design and pre-installed power cord.
Included Components
Your KRAUS WasteGuard Garbage Disposal package includes all necessary components for installation and operation:
- 1/2 HP Garbage Disposal Unit
- Drain and Dishwasher Connectors
- Pre-installed Power Cord
- Kitchen Sink Drain Stopper/Plunger
- Mounting Flange
- Removable Splash Guard

Figure 2: Kit Contents. This image illustrates all the components included with the KRAUS WasteGuard Garbage Disposal, such as the main unit, drain kit, power cord, dishwasher connector, stopper/plunger, and splash guard.
Setup and Installation
The KRAUS WasteGuard Garbage Disposal features an EZLock mounting assembly designed for quick and easy DIY installation. No plumber's putty is required for most sinks.
Pre-Installation Checklist:
- Ensure power is disconnected at the circuit breaker before beginning installation.
- Verify your sink has a standard 3 1/2 inch drain opening.
- Gather necessary tools: screwdriver, pliers, adjustable wrench, safety glasses.
Installation Steps:
- Remove any existing disposal or sink drain assembly.
- Install the new mounting flange into the sink drain opening.
- Attach the EZLock mounting assembly to the flange from below the sink, tightening by hand until secure.
- Connect the disposal unit to the EZLock assembly, twisting until it locks into place.
- Connect the drain pipe from the disposal to your existing plumbing.
- If connecting a dishwasher, remove the knockout plug from the dishwasher inlet on the disposal unit and connect the dishwasher drain hose.
- Plug the pre-installed power cord into a switch-operated wall outlet.

Figure 3: Easy Installation. This image highlights the simple 2-step mounting assembly and the inclusion of all necessary hardware and a pre-installed power cord for easy plug-in installation. It also notes the septic-safe, waste-reducing, and eco-friendly aspects of the product.

Figure 4: Compact Design. This image shows the KRAUS WasteGuard disposal installed under a kitchen sink, demonstrating its compact size which saves valuable storage space in the base cabinet.
Operating Instructions
The KRAUS WasteGuard operates as a continuous-feed disposal, allowing you to add food waste while the unit is running.
General Operation:
- Turn on a medium stream of cold water.
- Turn on the disposal using the wall switch or air switch.
- Slowly feed food waste into the drain opening. Avoid large bones, fibrous materials like corn husks, or non-food items.
- Allow the disposal to run until all food waste is ground and only the sound of water and motor is heard.
- Turn off the disposal, then turn off the water after a few seconds to flush the drain line.
Using the Sink Stopper/Plunger:
The included sink stopper allows you to fill the sink for soaking. Its extended tail piece can also be used as a plunger to push stubborn food scraps into the disposal.

Figure 5: Grinding Performance. This image shows food waste being fed into the disposal with water running, demonstrating the efficient grinding action of the MagnaGrind heavy-duty motor.

Figure 6: Splash Guard and Stopper. This image details the removable splash guard for easy cleaning and the multi-functional sink drain stopper/plunger.
Maintenance
Regular maintenance helps ensure optimal performance and longevity of your garbage disposal.
Cleaning:
- To clean the grinding chamber, grind small bones or ice cubes to help scour the interior.
- For odor control, grind citrus peels (lemon, orange) with cold water.
- The removable splash guard can be lifted out for easy cleaning to eliminate build-up and reduce sink odor.
General Tips:
- Always use cold water when operating the disposal. Hot water can melt grease, which may then solidify in the drain pipes.
- Avoid pouring grease or oil down the drain.
- Do not dispose of non-food items, large quantities of fibrous materials, or expandable foods (e.g., pasta, rice).
Troubleshooting
This section provides solutions for common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Disposal does not start. | No power; Motor overload (safety shut-off activated). | Check circuit breaker. Press the red RESET button on the bottom of the disposal unit. Ensure the power cord is securely plugged in. |
| Disposal hums but does not grind. | Jam in the grinding chamber. | Turn off power. Use a broom handle or wooden spoon to dislodge the object from the grinding chamber. NEVER use your hand. Press the RESET button after clearing the jam. |
| Leaking from the disposal. | Loose connections; Cracked housing. | Check all plumbing connections for tightness. Inspect the unit for visible cracks. If housing is cracked, replacement may be necessary. |
| Slow draining. | Drain line blockage; Splash guard obstruction. | Run disposal with cold water for longer. Clean the removable splash guard. Check the drain line for clogs beyond the disposal. |

Figure 7: Safety Features. This image highlights the pre-installed power cord for easy plug-in and the motor safety auto shut-off feature with a visible reset button, designed to prevent damage in case of a blockage.

Figure 8: Anti-Jam Technology. This cross-section image illustrates the internal components and the motor safety shut-off system that stops power to prevent damage from blockages, with a reset button to restore power.
Specifications
| Feature | Detail |
|---|---|
| Model Number | KWD110-50MBL |
| Horsepower | 1/2 HP (0.5 HP) |
| Motor Speed | 3800 RPM |
| Voltage | 120 Volts |
| Dimensions (L x W x H) | 5.25 x 8.75 x 13.88 inches |
| Weight | 10.5 pounds |
| Material | Plastic housing, Stainless Steel grinding components |
| Drain Opening Compatibility | Standard 3 1/2 inch |
| Installation Style | Quick-connect, Plug-In |

Figure 9: Product Dimensions. This diagram provides the exact measurements of the KRAUS WasteGuard disposal, including its height, width, and depth, and confirms compatibility with standard 3 1/2 inch round drain openings.
Warranty Information
The KRAUS WasteGuard 1/2 HP Ultra-Quiet Garbage Disposal is backed by a 5-Year Limited Warranty. This warranty covers defects in material and manufacturing under normal use. For detailed terms and conditions, please refer to the official Kraus warranty documentation or visit the manufacturer's website.

Figure 10: Premium Components and Warranty. This image highlights the high-quality components of the disposal, such as the stainless steel grinding chamber and EZLock mounting assembly, and confirms the 5-year limited warranty.
Customer Support
For further assistance, technical support, or warranty claims, please contact Kraus customer service. You can find contact information on the official Kraus website or through your product's packaging.
Visit the official Kraus website for more information: www.kraususa.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.