1. Introduction
The OLEVS Model G9920 is an automatic mechanical watch featuring a skeleton dial, luminous display, and durable stainless steel construction. It is designed for daily wear and offers reliable timekeeping with proper care.
Image 1: Front view of the OLEVS Model G9920 Gold Automatic Skeleton Watch.
2. Initial Setup
2.1 Unpacking
Carefully remove the watch from its packaging. Ensure all included components, such as the warranty card, instruction manual, and protective pouch/box, are present.
2.2 Winding the Watch
Your OLEVS G9920 is an automatic mechanical watch. It is powered by the motion of your wrist. Before first use, or if the watch has stopped, it needs to be manually wound.
- Locate the crown on the right side of the watch case.
- Ensure the crown is in its innermost position (position 0).
- Turn the crown clockwise approximately 30-40 times. This will provide sufficient power reserve to start the movement.
- The watch will begin to run.
Image 2: Close-up view of the watch crown for winding and setting.
2.3 Setting the Time
- Pull the crown out to position 1 (first click).
- Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
- Once the time is set, push the crown back into its innermost position (position 0) to engage the movement.
2.4 Adjusting the Bracelet
The stainless steel bracelet can be adjusted for a custom fit. A strap adjuster is included. If you are unsure how to adjust it, please consult a professional watchmaker.
Image 3: The OLEVS G9920 watch worn on a wrist, demonstrating proper fit.
3. Operating Your Watch
3.1 Automatic Movement
The OLEVS G9920 features a Japanese Automatic movement. This means the watch is self-winding and does not require a battery. It gains power from the natural motion of your arm. Wearing the watch for at least 8-10 hours a day will keep it sufficiently wound. If worn less frequently, manual winding may be necessary.
Image 4: The transparent case back revealing the automatic mechanical movement of the OLEVS G9920.
3.2 Luminous Display
The watch hands and markers feature an HD luminous coating, allowing for clear time reading in low-light conditions. Exposure to light will charge the luminous material.
Image 5: The luminous hands and markers of the OLEVS G9920 watch glowing in the dark.
4. Maintenance and Care
4.1 Water Resistance
Your OLEVS G9920 watch is water-resistant up to 30 meters (100 feet). This means it is suitable for daily splashes, rain, and hand washing.
- DO NOT wear the watch while swimming, diving, or showering.
- DO NOT operate the crown or pushers when the watch is wet or submerged.
- After exposure to water, wipe the watch dry with a soft cloth.
Image 6: The OLEVS G9920 watch partially submerged in water, illustrating its 30-meter water resistance.
4.2 Cleaning
To maintain the appearance of your watch, regularly wipe the case and bracelet with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
4.3 Storage
When not wearing your watch, store it in a cool, dry place, away from direct sunlight and extreme temperatures. The included protective pouch or box is ideal for storage.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch has stopped or is running slowly. | Insufficient power reserve. | Manually wind the watch by turning the crown clockwise 30-40 times. Wear the watch regularly to keep it wound. |
| Time is inaccurate. | Time not set correctly or watch needs winding. | Set the time as described in Section 2.3. Ensure the watch is adequately wound. |
| Condensation under the crystal. | Exposure to extreme temperature changes or water ingress. | Immediately take the watch to a professional watchmaker for inspection and repair to prevent damage. |
If you experience issues not listed here, or if the suggested solutions do not resolve the problem, please contact OLEVS customer support.
6. Specifications
- Model Number: G9920
- Movement Type: Japanese Automatic
- Case Material: Stainless Steel
- Band Material: Stainless Steel
- Crystal: Sapphire Crystal
- Case Diameter: 41 Millimeters
- Case Thickness: 12 Millimeters
- Band Width: 20 Millimeters
- Band Length: 8 Inches
- Water Resistance Depth: 30 Meters (100 Feet)
- Additional Features: Luminous Display, Second Hand
- Item Weight: 119 Grams
7. Warranty and Support
OLEVS provides a 2-year warranty for the Model G9920 watch. This warranty covers manufacturing defects. Please refer to the included warranty card for full terms and conditions.
For any questions, technical support, or warranty claims, please contact OLEVS customer service through the platform where you purchased the product.
Video 1: Official OLEVS video demonstrating the features and appearance of the automatic mechanical watch.