Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your IXTECH Home Keyless Entry Door Lock Deadbolt with Handle, Model IX-THI01. Please read this manual thoroughly before installation and use to ensure proper function and security.
What's Included
Verify that all components are present before beginning installation:
- Exterior Keypad Assembly
- Interior Assembly
- Deadbolt Latch
- Handle Pull Assembly (Exterior)
- Lever Handle (Interior)
- Strike Plate
- Mounting Plate
- Mounting Hardware (screws, spindle, reset tool)
- Keys (2)
Image: All components included in the IXTECH door lock package.
Specifications
| Brand | IXTECH |
| Model Name | IX-THI01 |
| Lock Type | Keypad Deadbolt |
| Material | Alloys |
| Finish Type | Oil Rubbed Bronze |
| Item Dimensions (L x W x H) | 11.8 x 2.6 x 0.5 inches |
| Item Weight | 4.88 pounds |
| Power Source | 4 AA batteries (not included) |
| Special Features | Auto-Lock, Customizable Codes, Anti-Peeking Password, Weather Resistant |
Setup & Installation
The IXTECH keyless entry door lock is designed for easy installation on standard right and left-hand front doors. Follow these steps carefully:
- Prepare the Door: Ensure your door has standard bore holes. If replacing an existing lock, remove the old hardware.
- Install the Latch: Insert the deadbolt latch into the door edge. Ensure the latch is oriented correctly for your door's swing. Secure with screws.
- Install Exterior Assembly: Place the exterior keypad assembly onto the door, aligning the spindle through the latch.
- Install Mounting Plate: Position the interior mounting plate over the spindle and secure it to the exterior assembly with screws.
- Connect Wires: Connect the wire harness from the exterior assembly to the interior assembly.
- Install Interior Assembly: Attach the interior assembly to the mounting plate, ensuring the thumb turn aligns with the deadbolt mechanism. Secure with screws.
- Install Handle Pull: Attach the exterior handle pull and interior lever handle, securing them with the provided hardware.
- Install Strike Plate: Install the strike plate on the door frame, aligning it with the deadbolt latch.
- Insert Batteries: Open the battery cover on the interior assembly and insert 4 AA batteries.
- Perform Handing Process (Crucial): With the door open and unlocked, load 3 AA batteries. Press and hold the RESET button on the interior assembly using the RESET tool. Load the last battery and keep holding the RESET button for 3 seconds until you hear a long "beep". The latch bolt will extend to learn the orientation of the door.
Image: Illustration of the installation process for the IXTECH door lock.
Installation Video Guide
Video: A detailed step-by-step guide for installing the IXTECH Door Lock with Handle.
Operating Instructions
The default master code is 12345678. It is recommended to change this code immediately after installation.
- Change Master Code:
Press IXtech twice → Enter Master Code → Press IXtech once → Wait for long green light → Press 1 → Wait for green flash → Enter New Master Code → Press IXtech once → Wait for green flash. - Add User Code:
Press IXtech twice → Enter Master Code → Press IXtech once → Wait for long green light → Press 2 → Wait for green flash → Enter New User Code → Press IXtech once → Wait for green flash. - Delete User Code:
Press IXtech twice → Enter Master Code → Press IXtech once → Wait for long green light → Press 3 → Wait for green flash → Enter Unwanted User Code → Press IXtech once → Wait for green flash. - Silent Mode:
Press IXtech twice → Enter Master Code → Press IXtech once → Wait for long green light → Press 4 → Wait for green flash → Press 1 to enable or 2 to disable → Press IXtech once → Wait for green flash. - Auto-Lock:
Press IXtech twice → Enter Master Code → Press IXtech once → Wait for long green light → Press 5 → Wait for green flash → Press 1 to enable or 2 to disable → Press IXtech once → Wait for green flash. - Set Auto-Lock Time Delay (10-99 seconds):
Press IXtech twice → Enter Master Code → Press IXtech once → Wait for long green light → Press 8 → Wait for green flash → Enter Duration (10-99) → Press IXtech once → Wait for green flash. - Add One-Time Code:
Press IXtech twice → Enter Master Code → Press IXtech once → Wait for long green light → Press 7 → Wait for green flash → Enter One-Time Code → Press IXtech once → Wait for green flash. - Vacation Mode:
Press IXtech twice → Enter Master Code → Press IXtech once → Wait for long green light → Press 6 → Wait for green flash → Press IXtech once → Wait for green flash. (Only the master code will unlock the door in this mode).
Programming and Use Video Guide
Video: Instructions for programming and using the IXTECH Keyless Entry Door Lock Deadbolt.
Key Features
- Electronic Keypad: Allows keyless entry with customizable codes.
- Heavy-Duty Deadbolt: Provides an additional layer of security.
- Customizable Entry Codes: Supports up to 6 different permanent or temporary user codes.
- Oil-Rubbed Bronze Finish: A decorative finish suitable for various door styles.
- Weather Resistance: Designed to withstand temperatures from -22°F to 158°F and features an IP54 waterproof rating.
- Anti-Peeking Password: Allows entry of random digits before or after your actual code to prevent unauthorized viewing.
- Low Battery Alert: An indicator light notifies you when batteries need replacement.
Image: Weather resistance features of the IXTECH door lock.
Maintenance
- Battery Replacement: The lock requires 4 AA batteries. Replace all batteries when the low battery indicator illuminates. Use high-quality alkaline batteries for optimal performance.
- Cleaning: Clean the keypad and exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
Troubleshooting
- Lock Not Responding: Check battery levels and replace if necessary. Ensure the wire harness connection is secure.
- Codes Not Working: Verify that the correct master code and user codes are being entered. Ensure the handing process was completed correctly after installation. If issues persist, perform a factory reset and reprogram all codes.
- Stiff Interior Lever: If the interior lever feels stiff after locking from the outside, it may indicate a slight misalignment or friction. Ensure all screws are tightened appropriately and the latch operates smoothly.
- Keypad Not Lighting Up: Check battery levels. If batteries are new, ensure they are inserted with correct polarity.
- Lock Mechanism Not Engaging/Disengaging: Ensure the deadbolt latch is installed correctly and moves freely. Check for any obstructions in the door frame or strike plate.
Warranty & Support
The IXTECH Home Keyless Entry Door Lock Deadbolt with Handle comes with a 12-month warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.
For technical assistance, troubleshooting, or warranty claims, please contact IXTECH customer support. Refer to the product packaging or the official IXTECH website for the most current contact information.
