kalado KCA01 H13 True HEPA Air Purifier Replacement Filters

Introduction

Thank you for choosing kalado KCA01 H13 True HEPA Air Purifier Replacement Filters. These filters are designed to maintain the optimal performance of your kalado air purifier, ensuring clean and healthy air in your home. This manual provides essential information on installation, maintenance, and specifications to help you get the most out of your replacement filters.

Image: Two kalado KCA01 H13 True HEPA replacement filters, ready for installation.

Setup and Installation

Follow these steps to properly install your new kalado KCA01 replacement filters:

1. Power Off: Ensure your kalado air purifier is turned off and unplugged from the power outlet before attempting any filter replacement.
2. Access Filter Compartment: Locate the filter compartment on your air purifier. This is typically at the bottom or back of the unit. Refer to your air purifier's specific manual for exact instructions on opening the compartment.
3. Remove Old Filters: Carefully remove the used filters. It is recommended to place them directly into a trash bag to prevent dust and particles from spreading.
4. Unpack New Filters: Remove the new kalado KCA01 filters from their protective packaging.
5. Insert New Filters: Insert the new filters into the compartment, ensuring they are oriented correctly. The H13 True HEPA filter and activated carbon filter should fit snugly.
6. Close Compartment: Securely close the filter compartment cover.
7. Power On and Reset: Plug the air purifier back into the power outlet and turn it on. If your air purifier has a filter reset indicator, follow the instructions in your air purifier's manual to reset it.

Image: Illustration of the bottom access point for filter replacement on a kalado air purifier.

Operating Principles

The kalado KCA01 filters utilize a 3-stage filtration system to effectively purify the air:

• Stage 1: Pre-Filter
  The ultra-fine nylon pre-filter captures large airborne particles such as dust, lint, fibers, pet hair, and pet dander. This initial layer helps to extend the lifespan of the subsequent filters.
• Stage 2: H13 True HEPA Filter
  The H13 True HEPA filter is highly efficient, capturing at least 99.97% of airborne particles as small as 0.3 microns. This includes common allergens like pollen, dust mites, and mold spores, as well as smoke particles and other fine particulates.
• Stage 3: Activated Carbon Filter
  The activated carbon filter is designed to absorb various household odors, volatile organic compounds (VOCs), and harmful gases. This includes cooking smells, pet odors, smoke, and formaldehyde, leaving the air fresh and clean.

Image: Visual representation of the 3-stage filtration process, showing how each layer targets different pollutants.

Image: Detailed diagram showing the primary filter, True HEPA H13 filter, and activated carbon filter layers and the types of particles they capture.

Maintenance

Regular filter replacement is crucial for maintaining the efficiency and effectiveness of your kalado air purifier. The KCA01 filters are not washable and should not be cleaned with water or detergents.

• Replacement Frequency: It is recommended to replace the filters every 2 to 4 months, depending on the air quality in your environment and the frequency of air purifier use. Environments with higher levels of dust, pet dander, or smoke may require more frequent replacement.
• Filter Indicator: Pay attention to your air purifier's filter replacement indicator light. This light will signal when it's time to change the filters.
• Disposal: Dispose of used filters in a sealed plastic bag to prevent the release of trapped pollutants.

Troubleshooting

If you experience issues with your air purifier after filter replacement, consider the following:

• Reduced Airflow: If airflow seems reduced, ensure the filters are installed correctly and the compartment cover is securely closed. Check if the plastic packaging was fully removed from the new filters.
• Persistent Odors: If odors persist, the activated carbon filter may be saturated. Ensure the filter is new and properly installed. In highly polluted environments, more frequent replacement might be necessary.
• Filter Indicator Not Resetting: If the filter replacement indicator light remains on after installing new filters, refer to your air purifier's manual for specific instructions on how to manually reset the filter life counter.
• Unusual Noise: Ensure filters are seated correctly and not obstructing any moving parts. If noise persists, contact kalado customer support.

Specifications

Warranty and Support

For information regarding the warranty of your kalado air purifier or the replacement filters, please refer to the documentation provided with your original air purifier purchase. As replacement parts, specific warranty details for filters may vary.

If you have any questions, require technical assistance, or need to purchase additional replacement filters, please contact kalado customer support through their official website or the retailer where you purchased the product. Please note that information on spare parts availability is currently unavailable through general product listings, so direct contact with kalado support is recommended for specific inquiries.