AMMIY Key Lock Box User Manual

1. Introduction

Thank you for choosing the AMMIY Key Lock Box. This wall-mounted, 4-digit combination lock box is designed to provide secure storage for your keys and other small items, offering convenience and peace of mind. Its weatherproof and durable construction makes it suitable for both indoor and outdoor use. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your lock box.

2. Safety Information

• Always keep your combination code confidential and do not share it with unauthorized individuals.
• Do not store the combination code inside the lock box.
• Ensure the lock box is securely mounted to a stable surface to prevent unauthorized removal.
• Regularly check the mounting screws for tightness, especially if installed in high-traffic areas or outdoors.
• Keep the combination dials clean and free from debris to ensure smooth operation.
• This product is designed for key and small item storage; do not use it for highly valuable items or sensitive documents without additional security measures.

3. Package Contents

Please verify that all components are present in the package:

• 1 x AMMIY Key Lock Box
• 4 x Mounting Screws
• 4 x Expansion Plugs
• 1 x User Manual (this document)

4. Product Overview and Features

The AMMIY Key Lock Box is constructed from high-strength aluminum alloy, designed to withstand hammering, sawing, and prying. It features a 4-digit resettable combination for enhanced security and a protective shutter cover to shield the dials from weather and dust.

Figure 4.1: Key Lock Box Components. This diagram illustrates the main components: the switch to open the cover, the 4-digit dials, the reset button for changing the code, and the protective shutter cover.

Figure 4.2: Large Storage Capacity. The lock box offers ample internal space, measuring approximately 6.5 cm (2.6 inches) in width and 12 cm (4.7 inches) in length, capable of holding at least 5 house keys, car keys, or small cards.

Figure 4.3: Extreme Durability. The lock box is designed to be weatherproof, rust-proof, and heat-resistant, made from zinc alloy, providing strength to withstand hammering, sawing, or prying attempts.

Key Features:

• Sturdy Construction: Made from high-strength aluminum alloy, resistant to physical attacks.
• Weatherproof Design: Rust and corrosion resistant, suitable for outdoor installation.
• Large Capacity: Can hold multiple keys, car keys, or small documents.
• Resettable 4-Digit Combination: Offers 10,000 possible combinations for enhanced security.
• Protective Shutter Cover: Shields dials from environmental elements.

5. Setup

5.1 Setting the Initial Combination

The lock box comes with a factory default combination, usually "0000". It is highly recommended to change this to a personal, memorable code immediately after unpacking.

1. Open the lock box using the default combination (0-0-0-0) by aligning the numbers and pushing down the switch.
2. Locate the reset lever/button inside the lock box, typically on the back of the door mechanism.
3. Push the reset lever from position A to B (or press the reset button as indicated in Figure 4.1).
4. Rotate the dials to your desired 4-digit combination. Make sure the numbers are clearly aligned with the indicator marks.
5. Return the reset lever from position B to A (or release the reset button).
6. Scramble the dials to lock the box. Test your new combination to ensure it opens the box correctly before closing it completely.

Figure 5.1: Combination Possibilities. The 4-digit combination system offers 10,000 unique codes for high security.

5.2 Mounting the Lock Box

The AMMIY Key Lock Box can be wall-mounted for permanent installation. Choose a discreet and secure location.

1. Step 1: Mark Position. Hold the lock box against the desired mounting surface. Use a pencil to mark the positions of the four screw holes on the back of the box.
2. Step 2: Drill Holes. Using an appropriate drill bit for your wall material (e.g., masonry bit for concrete/brick, wood bit for wood), drill holes at the marked positions.
3. Step 3: Insert Expansion Plugs. For concrete or brick walls, gently tap the expansion plugs into the drilled holes with a hammer until they are flush with the surface.
4. Step 4: Install Box with Screws. Align the lock box with the drilled holes (and expansion plugs, if used). Insert the mounting screws through the lock box's holes and tighten them securely with a screwdriver. Ensure the box is firmly attached and does not wobble.

Figure 5.2: Installation Steps. This image illustrates the four steps for wall-mounting the lock box: marking screw holes, drilling, inserting expansion plugs, and securing with screws.

6. Operating Instructions

6.1 Opening the Lock Box

1. Slide down the protective shutter cover to reveal the combination dials.
2. Rotate the dials to align your correct 4-digit combination with the indicator marks.
3. Push down the switch located below the dials to release the door.
4. Open the door to access the contents.

6.2 Changing the Combination

You can change the combination at any time. Follow these steps carefully:

1. Open the lock box using the current combination.
2. With the door open, locate the reset lever/button on the inside of the door mechanism.
3. Push the reset lever from position A to B (or press the reset button).
4. While the lever is in the reset position, rotate the dials to your new desired 4-digit combination. Ensure the numbers are perfectly aligned.
5. Return the reset lever from position B to A (or release the reset button).
6. Scramble the dials.
7. Crucial: Test your new combination several times with the door open before closing it. If the new code does not work, repeat the steps.
8. Once confirmed, close the door and scramble the dials to secure the lock box.

Figure 6.1: Password Change Mechanism. This image highlights the ease of access to the reset mechanism for changing the combination, ensuring sufficient space for operation.

7. Maintenance

• Cleaning: Wipe the exterior of the lock box with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Dials: Periodically check the combination dials for any dirt or debris that might hinder their movement. Use a soft brush or compressed air to clean them if necessary.
• Lubrication: If the dials become stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts, avoiding oil-based lubricants which can attract dust.
• Inspection: Regularly inspect the lock box and its mounting for any signs of wear, damage, or loosening. Address any issues promptly to maintain security.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the purchase platform or contact AMMIY customer service directly. Contact details can typically be found on the product packaging or the seller's page where the product was purchased.

Online Support: Visit the official AMMIY brand store on Amazon or the retailer's website for FAQs and contact options.