Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Sound Town MR-DR14UT 14U PA DJ Pro Audio Rack/Road ATA Case. Please read these instructions carefully before using the product to ensure optimal performance and longevity.
Product Features
- 14U Road Case Design: Features a 14U rackable space with a 2U drawer and 12U remaining bottom rack space.
- Rack Depth: Offers a 20.2-inch rack depth for various PA/DJ equipment.
- Slant Mixer Top: Includes an 11U slant mixer top for convenient mixer placement and access.
- Integrated Drawer: A sturdy 2U drawer with protective foam is included for storing notebooks, tablets, microphones, and cables.
- Attachable Side Table: One standing lid table is provided, which can be attached to either the left or right side of the case, creating a workspace.
- Durable Construction: Built with aluminum-reinforced plywood, heavy-duty twist latches, and rubber-gripped handles for protection and transport.
- Mobility: Equipped with four 5-inch casters for easy movement.
Setup Instructions
1. Unpacking the Case
Carefully remove the MR-DR14UT case from its packaging. Inspect the case for any signs of damage during transit. Retain all packaging materials for future transport or storage.
Image: The Sound Town MR-DR14UT case with its top and front lids removed, revealing the internal rack space and the 2U drawer. The side table is shown detached on the right.
2. Attaching the Side Table
- Identify the attachable lid table.
- Position the table next to either the left or right side of the main case.
- Align the table's attachment points with the corresponding slots on the case.
- Secure the table firmly to the case using the provided hardware or latches. Ensure it is stable before placing items on it.
Image: A diagram illustrating how the side table can be attached to either the left or right side of the Sound Town MR-DR14UT case, providing a flexible workspace.
3. Installing Rack Equipment
- Open the front and rear access panels of the case.
- Mount your 19-inch rack-mountable equipment (e.g., power amplifiers, wireless microphone receivers) into the 12U bottom rack space using appropriate rack screws (not included).
- For the 11U slant mixer top, place your mixer securely on the top surface.
- Utilize the 2U drawer for smaller accessories, cables, or microphones. The drawer includes protective foam.
Image: An interior view of the Sound Town MR-DR14UT case, highlighting the rack rails for equipment installation and the integrated 2U drawer at the bottom.
Image: The Sound Town MR-DR14UT case with its 2U drawer fully extended, showing the internal protective foam lining for accessories.
Operating Instructions
1. Transporting the Case
- Ensure all equipment inside the rack is securely mounted and all cables are properly managed to prevent movement during transport.
- Close and latch all lids and panels securely before moving the case.
- Utilize the four 5-inch casters for rolling the case. For uneven surfaces or stairs, use the rubber-gripped handles for lifting.
2. Using the Slant Mixer Top
The 11U slant mixer top is designed to hold your mixer at an ergonomic angle for easy control access during performances or events. Ensure your mixer is placed centrally and stably on the top surface.
3. Utilizing the 2U Drawer
The 2U drawer provides secure storage for smaller items. Pull the drawer handle to open and push to close. The internal foam helps protect contents from impact.
Maintenance
- Cleaning: Wipe the exterior surfaces with a damp cloth. Avoid abrasive cleaners that may damage the finish.
- Latches and Hinges: Periodically check all latches and hinges for proper function and tightness. Lubricate if necessary to ensure smooth operation.
- Casters: Inspect casters for debris or wear. Clean wheels as needed to maintain smooth rolling.
- Internal Foam: Check the protective foam in the drawer for wear or damage. Replace if its protective qualities are compromised.
Troubleshooting
Issue: Drawer is difficult to open or close.
Possible Cause: Equipment in the bottom rack space may be obstructing the drawer mechanism.
Solution: Ensure that no equipment or cables in the 12U bottom rack space are protruding or interfering with the drawer's movement. Adjust equipment placement if necessary.
Issue: Case casters are not rolling smoothly.
Possible Cause: Debris caught in the wheels or worn caster bearings.
Solution: Clean any debris from the caster wheels. If the issue persists, inspect the casters for damage and consider replacement if severely worn.
Issue: Side table feels unstable.
Possible Cause: Table not securely attached or placed on an uneven surface.
Solution: Re-check the attachment points to ensure the table is firmly secured to the main case. Ensure the case and table are on a flat, stable surface.
Specifications
| Feature | Detail |
|---|---|
| Model Number | MR-DR14UT |
| Rack Units (Total) | 14U (12U bottom rack, 2U drawer) |
| Slant Mixer Top | 11U |
| Rackable Depth (with lid) | 20.2 inches |
| External Height (with lid, excluding casters) | 30.9 inches |
| External Depth (with lid) | 25.3 inches |
| External Width (with lid) | 21.5 inches |
| Caster Size | 5 inches |
| Load Capacity | 55 Pounds |
| Material | Aluminum-reinforced plywood, Rubber (casters) |
| Color | Black |
| Required Assembly | No (minor assembly for side table attachment) |
| UPC / GTIN | 810062038619 |
Image: A detailed diagram showing various dimensions of the Sound Town MR-DR14UT case, including external height, depth, rackable depth, drawer height, and table dimensions.
Warranty and Support
The Sound Town MR-DR14UT is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any inquiries regarding your product, please contact Sound Town customer service. Refer to the official Sound Town website or your purchase documentation for current contact information.
Sound Town Official Website: Visit Sound Town Store on Amazon