HOTO Cordless Brushless Drill Tool Set QWSGJ003 Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your HOTO Cordless Brushless Drill Tool Set, model QWSGJ003. Please read this manual thoroughly before operating the tool set and retain it for future reference. Proper understanding of these instructions will ensure optimal performance and longevity of your tools.

2. Product Overview and Components

The HOTO Cordless Brushless Drill Tool Set QWSGJ003 is a comprehensive kit designed for various household and DIY tasks. It features a minimalist design and includes a range of essential tools housed in a portable case.

Image: The HOTO Cordless Brushless Drill Tool Set, with all components visible within its organized carrying case.

Included Components:

• 12V Brushless Drill
• Multipurpose Screwdriver
• Adjustable Spanner
• Claw Hammer with Rubber Cap
• Needle-Nose Pliers
• Self-Lock Measuring Tape (3m / 10ft)
• Screwdriver Bit Set (10 pieces)
• Drill Bit Set (8 pieces: 4 metalworking, 4 woodworking)
• USB-C Charging Cable
• Portable Carrying Case

Image: Detailed diagram illustrating each component of the HOTO tool set with corresponding labels.

3. Setup

Initial Charging

Before first use, ensure the 12V Brushless Drill is fully charged. This optimizes battery performance and longevity.

• Connect the provided USB-C charging cable to the drill's USB-C charging port.
• Connect the other end of the cable to a compatible USB power adapter (not included).
• The LED display on the drill will indicate charging status. Charge until the battery indicator shows full.
• Important: Do not operate the drill while it is charging.
• To prevent battery malfunction, avoid leaving the device unused for more than 10 months without charging.

4. Operating Instructions

4.1. 12V Brushless Drill

The cordless brushless drill offers precise control for drilling and driving tasks.

Image: The HOTO Cordless Brushless Drill in operation, demonstrating its use for fastening.

• Bit Installation: Insert the desired screwdriver bit or drill bit into the chuck. Rotate the chuck clockwise to tighten and secure the bit.
• Power On/Off: Press the trigger to activate the drill. Release the trigger to stop.
• LED Display: The integrated LED screen provides real-time information on performance and settings.
• Torque Regulation: Use the controls near the LED display to adjust the torque up to 30 N·m for precise application.
• Operating Modes: Switch between dual modes (pulse mode and custom mode) as required for different tasks.

Image: A close-up view of the drill's LED screen, showing the digital torque control interface.

4.2. Multipurpose Screwdriver

The manual screwdriver is designed for comfortable handling and efficient screw installation.

Image: The HOTO Multipurpose Screwdriver being used for furniture assembly.

• Features an anti-roll surface and a magnetic bit holder for secure bit retention.
• Ergonomic design ensures a comfortable grip.

4.3. Adjustable Spanner

The adjustable spanner is suitable for various fastening and loosening tasks.

Image: A close-up of the HOTO Adjustable Spanner, highlighting its 25mm extra-wide jaw.

• Features a 25mm extra-wide jaw for a strong grip on various sizes of nuts and bolts.
• Forged for durability and strength.

4.4. Claw Hammer with Rubber Cap

The claw hammer is designed for driving and removing nails, with added protection for surfaces.

Image: The HOTO Claw Hammer, showing its magnetic nail starter and the removable rubber cap.

• Magnetic Nail Starter: Allows for one-handed nail placement.
• Rubber Cap: Attach the non-slip rubber cap to protect work surfaces and reduce noise during use.

4.5. Needle-Nose Pliers

These pliers are versatile for gripping, bending, and cutting wires and small objects.

Image: The HOTO Needle-Nose Pliers in use, demonstrating their gripping capability.

• Features a labor-saving spring design.
• Multi-functional gripping jaws for peeling, curling, pressing, and cutting.

4.6. Self-Lock Measuring Tape

The measuring tape provides accurate measurements with a convenient self-lock feature.

• 10 feet (3m) length with a non-sharp edge.
• Self-lock system holds the tape in place.
• Smooth retraction with a single press of the release button.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your HOTO tool set.

• Cleaning: Wipe tools with a clean, dry cloth after each use to remove dust and debris. For stubborn grime, use a slightly damp cloth and mild soap, then dry thoroughly.
• Storage: Always store the tools in their designated slots within the carrying case. Keep the case in a dry environment, away from direct sunlight and extreme temperatures.
• Battery Care: As noted in the setup section, charge the drill periodically if not used for extended periods (recommended at least once every 10 months) to prevent battery degradation.
• Inspection: Periodically inspect all tools for any signs of wear, damage, or loose parts. Do not use damaged tools.

6. Troubleshooting

This section addresses common issues you might encounter with your HOTO Cordless Brushless Drill Tool Set.

If you encounter problems not listed here or if solutions do not resolve the issue, please contact customer support.

7. Specifications

Technical specifications for the HOTO Cordless Brushless Drill Tool Set QWSGJ003.

8. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official HOTO website. Keep your proof of purchase for any warranty claims.

For additional assistance, you may contact HOTO customer service through their official channels.