HomeBuds HB905

Homebuds Digital Bathroom Scale Instruction Manual

Model: HB905

Brand: HomeBuds

Introduction

Welcome to your new Homebuds Digital Bathroom Scale. Designed with precision and ease of use in mind, this scale provides accurate body weight measurements to support your health and fitness journey.

Our factory has focused on high-precision weighing technology since 2001, ensuring high accuracy, precision, and a high-contrast display throughout the scale's lifecycle.

Key Features

Package Contents

Please check the package for the following items:

Setup

Battery Installation

The Homebuds Digital Bathroom Scale comes with 3 AAA batteries included.

  1. Locate the battery compartment on the underside of the scale.
  2. Open the battery compartment cover.
  3. Insert the 3 AAA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.
Close-up of the underside of the Homebuds Digital Bathroom Scale showing the battery compartment with three AAA batteries inserted.

The scale requires three AAA batteries, which are included. Ensure they are inserted with the correct polarity.

Initial Calibration

For accurate readings, it is recommended to calibrate the scale after battery installation or if the scale has been moved.

  1. Place the scale on a hard, flat surface. Avoid carpets or uneven flooring.
  2. Step onto the scale briefly until the display shows "0.0" or a reading, then step off.
  3. The scale will automatically calibrate and be ready for use.

Operating Instructions

Taking a Measurement

  1. Ensure the scale is on a hard, flat surface.
  2. Gently step onto the center of the scale with bare, dry feet.
  3. Stand still until your weight is displayed on the LED screen.
  4. The reading will stabilize and then flash, indicating the final measurement.
  5. The scale will automatically turn off after a few seconds of inactivity.
Homebuds Digital Bathroom Scale displaying a weight of 129.3 lbs on its bright LED screen.

The crystal clear LED display shows your weight in large, easy-to-read numbers.

Switching Weight Units (lb/kg/st)

The Homebuds scale allows you to switch between pounds (lb), kilograms (kg), and stones (st).

  1. Locate the unit switch button on the underside of the scale, near the battery compartment.
  2. Press the button to cycle through the available units (lb, kg, st).
  3. The selected unit will be indicated on the LED display.
Close-up of the underside of the Homebuds Digital Bathroom Scale showing the unit switch button labeled 'UNIT'.

The unit switch button allows you to easily change between pounds, kilograms, and stones.

Maintenance & Care

Cleaning

To clean the scale, wipe the surface with a damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals.

Do not immerse the scale in water or spray water directly onto it.

Storage

Store the scale in a cool, dry place. Avoid extreme temperatures or high humidity.

Do not place heavy objects on the scale when not in use.

Homebuds Digital Bathroom Scale placed in a bathroom, bedroom, and living room, demonstrating its slim design and versatility.

The slim and elegant design allows the scale to be stored discreetly or displayed as a decorative item in various rooms.

Troubleshooting

Common Issues and Solutions

ProblemSolution
Display shows "Lo"Batteries are low. Replace with new AAA batteries.
Display shows "Err"Overload. The maximum weight capacity is 400 lbs (180 kg). Step off the scale immediately.
Inaccurate readingsEnsure the scale is on a hard, flat surface. Recalibrate by stepping on and off the scale.
No displayCheck battery installation and ensure batteries are not depleted.

Specifications

Warranty and Support

HomeBuds products are manufactured with high-quality standards. For any questions or support, please refer to the contact information provided with your purchase or visit the official HomeBuds website.

Our company was established in 2001 and dedicates itself to developing and manufacturing high-quality scales. Our first-class quality and social management system has been certified by ISO and Social Accountability.

Quality Management System Certificate for Shenzhen Shine Industrial Co., Ltd., dated August 9, 2023, valid until August 7, 2026, showing ISO certification.

HomeBuds' manufacturing processes are certified by ISO, ensuring high quality and reliability.

POSI Certificate for Shenzhen Shine Industrial Co., Ltd., dated October 31, 2023, valid until October 30, 2026, showing ISO13485:2016 certification for body fat scales.

Further certification highlights the company's commitment to quality management systems for medical devices.

Related Documents - HB905

Preview Homebuds Smart Body Fat Scale User Manual
User manual for the Homebuds Smart Body Fat Scale, detailing setup, operation, app connectivity, and troubleshooting.
Preview RF Exposure Evaluation Report for Smart Body Fat Scale (Homebuds/Vitafit) - Model HB902
This report details the RF exposure evaluation for the Smart Body Fat Scale, models HB902 and related variants, manufactured by Shenzhen Shine Industrial Co., Ltd. It covers compliance with FCC regulations and SAR exclusion criteria as per KDB447498D01.