1. Introduction
The Tuff Coat UT-217 is a single-component, flexible, water-based non-skid coating designed for durability and safety. This product utilizes a unique blend of cross-linking urethanes, acrylics, co-polymers, and recycled rubber granules to create a long-lasting, non-slip finish. It is suitable for both submerged and non-submerged applications.
This manual provides essential information for the proper preparation, application, and maintenance of Tuff Coat UT-217 to ensure optimal performance and longevity.
Image 1.1: Tuff Coat UT-217 Tan 5 Gallon pail, illustrating the product packaging.
2. Safety Information
Always prioritize safety during product handling and application. Review the following guidelines:
- Ventilation: Ensure adequate ventilation in the work area to prevent vapor accumulation.
- Personal Protective Equipment (PPE): Wear appropriate PPE, including safety glasses, chemical-resistant gloves, and protective clothing, to prevent skin and eye contact.
- Ingestion: Do not ingest the product. In case of accidental ingestion, seek immediate medical attention.
- Skin Contact: In case of skin contact, wash thoroughly with soap and water.
- Eye Contact: In case of eye contact, flush immediately with plenty of water for at least 15 minutes and seek medical attention.
- Children and Pets: Keep the product out of reach of children and pets.
- Disposal: Dispose of unused product and empty containers according to local regulations.
3. Product Overview
3.1 Key Features
- Submersible and water-based formulation.
- Flexible matte finish with rubberized texture.
- Dries to a thickness of 30-35 mils.
- Hides surface imperfections and enhances existing non-skid finishes.
- Low odor for improved application environment.
- Impact-resistant and highly durable.
3.2 Intended Use
Tuff Coat UT-217 is designed for creating attractive, durable, and non-slip surfaces in various environments, including:
- Splash pads and wave pools.
- Spray parks.
- Restroom floors.
- Deck surfaces.
- Other areas requiring slip resistance, whether in or out of water.
Image 3.1: An example of a non-slip surface application in a water play area.
Image 3.2: Tuff Coat offers both submersible and non-submersible coatings. UT-217 is a submersible product.
Image 3.3: Tuff Coat coatings are available in multiple colors. This manual pertains to the Tan (UT-217) variant.
4. Preparation and Setup
4.1 Surface Requirements
Tuff Coat UT-217 is suitable for application on a variety of substrates, including:
- Concrete
- Fiberglass
- Wood
- Metal substrates
- Previously painted surfaces
4.2 Surface Preparation
Proper surface preparation is critical for adhesion and performance. Surfaces must be clean, dry, and free of loose material, oil, grease, and other contaminants.
- Cleaning: Thoroughly clean the surface. For best results, pressure washing may be necessary. Allow the surface to dry completely.
- Priming (Fiberglass, Concrete, Wood): For these substrates, apply one coat of Tuff Coat UT-80 Adhesion Primer according to its instructions.
- Priming (Metal): For metal surfaces, apply one coat of Tuff Coat UT-95 Metal Primer according to its instructions.
Image 4.1: Application layers for fiberglass, concrete, and wood surfaces.
Image 4.2: Application layers for metal surfaces.
4.3 Product Preparation
- Before application, thoroughly stir the Tuff Coat UT-217 coating to ensure uniform consistency and distribution of rubber granules. Do not dilute.
5. Application Instructions
5.1 Application Methods
Tuff Coat UT-217 can be applied using a Tuff Coat roller or a low-pressure hopper spray gun.
Image 5.1: Tuff Coat can be applied using either a roller or a spray gun.
5.2 Coating Application
- Apply the coating evenly to the prepared surface.
- Typically, two coats are recommended for optimal coverage and durability.
- Allow sufficient drying time between coats as specified by the primer and coating instructions. The flexible matte finish dries to a thickness of 30-35 mils.
- Store rollers in an airtight bag between coats to prevent drying.
Image 5.2: A close-up of the finished textured surface of Tuff Coat UT-217 Tan.
6. Maintenance
To maintain the appearance and performance of your Tuff Coat UT-217 surface:
- Cleaning: Regularly clean the surface with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the coating.
- Inspection: Periodically inspect the coated surface for any signs of wear or damage. Address minor issues promptly to prevent further deterioration.
- Reapplication: If significant wear occurs over time, the coating can be reapplied after proper surface preparation.
7. Troubleshooting
This section addresses common issues that may arise during or after application:
| Issue | Possible Cause | Solution |
|---|---|---|
| Poor Adhesion | Improper surface preparation (e.g., dirty, oily, or unprimed surface). | Ensure surfaces are thoroughly cleaned, dry, and primed as per instructions before application. |
| Uneven Finish | Inconsistent application technique or insufficient stirring of the product. | Stir the product thoroughly before and during use. Apply evenly using recommended tools. |
| Slow Drying Time | High humidity, low temperature, or excessive film thickness. | Ensure adequate ventilation. Apply within recommended temperature and humidity ranges. Apply coats at the specified thickness. |
| Bubbling or Blistering | Application over a damp surface, trapped air, or rapid drying of the surface layer. | Ensure the surface is completely dry. Avoid applying in direct sunlight or on hot surfaces. |
8. Product Specifications
| Specification | Detail |
|---|---|
| Brand | Tuff Coat |
| Model Name | UT-217 |
| Color | Tan |
| Finish Type | Matte |
| Size | 640 Fl Oz (5 Gallon) |
| Unit Count | 640.0 Fluid Ounces |
| Special Features | Submersible, Waterproof, Impact Resistant, Improves Existing Non-Skid Finishes |
| Specific Uses | Splash pads, wave pools, spray parks, restroom floors, deck surfaces, areas requiring slip resistance in or out of water |
| Surface Recommendation | Floors (Concrete, Fiberglass, Wood, Metal, Previously Painted) |
| Indoor/Outdoor Usage | Outdoor |
| Item Form | Liquid |
| Water Resistance Level | Waterproof |
| Material | Rubber |
| Manufacturer | MRT |
| UPC | 725469031715 |
9. Warranty and Support
For detailed warranty information, product support, or technical assistance, please contact the manufacturer, Tuff Coat, directly. Refer to the product packaging or the official Tuff Coat website for contact details.
