Pard NV007SP-940nm

PARD NV007S Night Vision Scope Instruction Manual

Model: NV007SP-940nm

1. Introduction

Thank you for choosing the PARD NV007S Night Vision Scope. This device is designed to transform your day rifle scope into a powerful night vision system, offering enhanced visibility in low-light conditions. It features a highly sensitive CMOS sensor, adjustable IR illumination, and full HD photo and video recording capabilities. Please read this manual carefully to ensure proper setup, operation, and maintenance of your device.

Key features include:

2. Setup

2.1 Package Contents

Before proceeding, please verify that all items listed below are included in your package:

PARD NV007S package contents including the monocular, pouch, manual, adapters, cables, and tools.

Figure 2.1: PARD NV007S Package Contents

2.2 Battery Installation

The PARD NV007S requires one 18650 Lithium Ion battery (included). To install the battery:

  1. Unscrew the battery cap located on the side of the device.
  2. Insert the 18650 battery with the positive (+) terminal facing inwards.
  3. Securely screw the battery cap back on.

2.3 Mounting to a Rifle Scope

The NV007S is designed for quick attachment to your existing day rifle scope. This allows for seamless transition between day and night observation without re-zeroing.

  1. Select the appropriate adapter ring and spacer rings that fit your rifle scope's eyepiece diameter.
  2. Attach the adapter to the eyepiece of your rifle scope.
  3. Slide the NV007S onto the adapter until it clicks securely into place.
PARD NV007S being quickly attached to a rifle scope.

Figure 2.2: Quick Attach and Detach Mechanism

The compact design of the NV007S ensures it can be easily carried and attached without significantly altering your shooting posture.

PARD NV007S showing its compact size, fitting into a pocket.

Figure 2.3: Compact Design of NV007S

3. Operating Instructions

3.1 Controls Overview

Familiarize yourself with the buttons and controls on your NV007S:

Video 3.1: NV007S Night Vision Monocular Overview, showing button functions and features.

3.2 Power On/Off

To power on the device, press and hold the Sleep / Power button until the display illuminates. To power off, press and hold the same button until the display turns off. A short press will put the device into sleep mode to conserve battery.

3.3 Day and Night Mode Switching

The NV007S automatically adjusts to light conditions. For optimal night vision, ensure the IR illuminator is active. The device utilizes a highly sensitive CMOS sensor for clear images in low light.

Comparison of day and night vision views through the PARD NV007S.

Figure 3.1: Day vs. Night Vision Capability

3.4 Focusing and Diopter Adjustment

For a clear image, adjust the focusing knob and the eyepiece diopter adjustment ring. Rotate the focusing knob until the target appears sharp. Adjust the diopter ring to ensure the display reticle is clear for your eyesight.

3.5 IR Illuminator Adjustment

The built-in IR illuminator provides additional light for night observation. Press the IR Lighting button to cycle through different IR intensity levels (IR I, IR II, IR III). The IR light is direction adjustable; unscrew the IR head and point the light in the desired direction for optimal illumination up to 350 meters.

PARD NV007S showing adjustable IR light settings and their effect on night vision clarity.

Figure 3.2: Direction Adjustable IR Light

3.6 Photo and Video Recording

The NV007S supports 2592x1944 photo resolution and 1920x1080 full HD video resolution. Insert a TF card (not included) into the designated slot to save recordings.

PARD NV007S illustrating recoil-activated recording feature with a fox in the crosshairs.

Figure 3.3: Recoil Activated Recording

3.7 WiFi Connectivity

The NV007S features WiFi connectivity, allowing you to connect to a smartphone or tablet for live view, photo/video transfer, and remote control via a dedicated app (check PARD's official website for app details). Press and hold the Zoom (+) / WiFi button to activate WiFi.

PARD NV007S connected to a smartphone via WiFi for photo and video functions.

Figure 3.4: WiFi Connectivity for Remote Control and Media Transfer

4. Maintenance

4.1 Cleaning

4.2 Storage

4.3 Waterproofing

The NV007S has an IP67 waterproof rating, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. While designed for outdoor use in various conditions, avoid prolonged submersion or high-pressure water jets.

PARD NV007S in a water splash, illustrating its IP67 waterproof rating.

Figure 4.1: IP67 Waterproof Rating

5. Troubleshooting

ProblemPossible CauseSolution
Device does not power on.Battery is low or incorrectly installed.Ensure battery is fully charged and inserted with correct polarity.
Image is blurry.Focus or diopter not adjusted.Adjust the focusing knob and eyepiece diopter adjustment ring.
Cannot record video.TF card full or not inserted; WiFi may need to be active.Check TF card capacity and reinsert. Ensure WiFi is turned on if required by your device's firmware for recording.
IR illuminator not working.IR setting too low or IR light obstructed.Cycle through IR intensity levels. Check for any physical obstructions.
WiFi connection issues.Incorrect app settings or device not in WiFi mode.Ensure WiFi is activated on the device. Check your smartphone's WiFi settings and the PARD app.

6. Specifications

FeatureSpecification
BrandPard
Model NameNV007SP-940nm
ColorBlack
Product Dimensions5.28"L x 2.8"W x 4.13"H
Item Weight265 Grams (9.3 ounces)
MaterialAluminum
Objective Lens Diameter42 Millimeters
Compatible DevicesiPhone, iPad, Android phone
Mounting TypePicatinny Mount (via adapter)
Night VisionYes
Reticle TypeCrosshair
Batteries1 Lithium Ion battery (included)
Photo Resolution2592x1944
Video Resolution1920x1080 Full HD
IR Illuminator RangeUp to 350 meters
Waterproof RatingIP67

7. Warranty and Support

Your PARD NV007S Night Vision Scope comes with a warranty. Please refer to the included Warranty Card in your package for detailed terms and conditions. Keep your proof of purchase for warranty claims.

For further assistance, technical support, or to explore other PARD products, please visit the official PARD store on Amazon or their official website:

PARD is committed to providing high-quality night vision and thermal imaging solutions. We appreciate your business.

Related Documents - NV007SP-940nm

Preview PARD NV007SP Series Quick Start Guide - Night Vision Device
Get started quickly with the PARD NV007SP Series Night Vision Device. This guide provides essential information on setup, operation, and specifications for your PARD night vision device.
Preview PARD NV007V Digital Night Vision Quick Start Guide
A comprehensive guide to the PARD NV007V digital night vision device, covering package contents, components, installation, key features, precautions, and specifications. Includes multilingual instructions.
Preview PARD NV007S Digital Night Vision Clip-On User Manual
Comprehensive user manual for the PARD NV007S digital night vision clip-on device, covering installation, operation, specifications, and warranty information. Learn how to set up and use your night vision scope effectively.
Preview PARD Night Stalker 4K Pro Digital Night Vision Scope User Manual
Comprehensive user manual for the PARD Night Stalker 4K Pro Digital Night Vision Scope, detailing specifications, installation, operation, features, and safety precautions for optimal use.
Preview PARD NV007V Digital Night Vision Operation Manual
Comprehensive operation manual for the PARD NV007V digital night vision device, covering installation, usage instructions, features, specifications, and warranty information.
Preview PARD FD1-LRF Series Digital Night Vision Front Clip-on User Manual
User manual for the PARD FD1-LRF Series Digital Night Vision Front Clip-on device, covering introduction, precautions, specifications, installation, operation, functions, and FCC warnings.