Trevi XR Jump Amplified Bluetooth Speaker XR 8A30 User Manual

Introduction

This manual provides detailed instructions for the safe and efficient use of your Trevi XR Jump Amplified Bluetooth Speaker, model XR 8A30. Please read this manual thoroughly before operating the device and retain it for future reference.

The Trevi XR Jump XR 8A30 is a portable amplified speaker designed for wireless audio playback from Bluetooth-enabled devices. It features True Wireless Stereo (TWS) functionality for connecting two speakers, a built-in microphone for hands-free calls, and multiple input options including USB and AUX-IN. The speaker is also water-resistant, making it suitable for various outdoor activities.

Product Overview

Key Features:

• 20W Amplified Sound: Delivers powerful audio output.
• Bluetooth Connectivity: Seamless wireless streaming from compatible devices.
• True Wireless Stereo (TWS): Connect two XR Jump speakers for enhanced stereo sound.
• USB Playback: Play music directly from a USB drive.
• AUX-IN Port: Wired connection for non-Bluetooth devices.
• Built-in Microphone: Enables hands-free phone calls.
• Water-Resistant Design: Suitable for outdoor use and protection against splashes.
• Portable Design: Compact and lightweight with an included carrying rope.

Package Contents:

• Trevi XR Jump Amplified Bluetooth Speaker (Model XR 8A30)
• Carrying Rope
• USB Charging Cable (assumed to be included for charging)
• AUX-IN Cable (assumed to be included for wired audio connection)
• User Manual (This document)

Image: Front view of the Trevi XR Jump speaker, showcasing its cylindrical design and integrated RGB lighting on the sides.

Setup

Charging the Speaker:

1. Locate the charging port (typically USB-C or Micro-USB) on the speaker.
2. Connect the provided USB charging cable to the speaker's charging port.
3. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
4. The charging indicator light will illuminate, typically red, during charging.
5. Once fully charged, the indicator light will change color (e.g., turn off or turn blue/green). A full charge provides approximately 500 hours of standby time, actual playback time varies.

Note: For optimal battery life, fully charge the speaker before first use.

Powering On/Off:

• To power on, press and hold the Power button (Ⓢ) for a few seconds until you hear an audible prompt or see the indicator lights activate.
• To power off, press and hold the Power button (Ⓢ) again for a few seconds until the indicator lights turn off.

Image: Rear view of the Trevi XR Jump speaker, displaying the control buttons (volume, power, mode) and input ports (USB, AUX-IN, charging port).

Operating Instructions

1. Bluetooth Pairing:

1. Ensure the speaker is powered on and in Bluetooth pairing mode. The Bluetooth indicator light will typically flash rapidly.
2. On your mobile device (smartphone, tablet, PC), enable Bluetooth and search for available devices.
3. Select "Trevi XR Jump" or "XR 8A30" from the list of found devices.
4. Once paired, the speaker will emit an audible confirmation, and the Bluetooth indicator light will stop flashing and remain solid.
5. You can now play audio from your device through the speaker.

Note: The Bluetooth range is approximately 10 meters (33 feet). Obstacles may reduce this range.

2. True Wireless Stereo (TWS) Function:

TWS allows you to connect two Trevi XR Jump speakers wirelessly for a stereo audio experience.

1. Ensure both XR Jump speakers are powered on and not connected to any Bluetooth device.
2. On one of the speakers (this will be the primary speaker), press and hold the TWS button (often indicated by a ∑ or similar icon) for a few seconds.
3. The speaker will enter TWS pairing mode, and you will hear a prompt.
4. The two speakers will automatically connect to each other. Once connected, you will hear another confirmation sound.
5. Now, pair your mobile device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section.
6. Audio will now play in stereo across both speakers.

Note: TWS mode only works with two identical Trevi XR Jump XR 8A30 speakers.

3. USB Playback:

1. Insert a USB flash drive containing MP3 audio files into the USB port on the speaker.
2. The speaker should automatically detect the USB drive and begin playing music. If not, press the Mode button (M) to switch to USB mode.
3. Use the speaker's control buttons to play/pause, skip tracks, and adjust volume.

4. AUX-IN Playback:

1. Connect one end of a 3.5mm audio cable (not included) to the AUX-IN port on the speaker.
2. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output of your external device.
3. Press the Mode button (M) on the speaker to switch to AUX-IN mode.
4. Play audio from your external device. Volume can be controlled via both the speaker and the external device.

5. Hands-free Calling:

When connected to your smartphone via Bluetooth, the speaker can be used for hands-free calls.

• Answering a Call: When a call comes in, press the Play/Pause button (▶) once to answer.
• Ending a Call: During a call, press the Play/Pause button (▶) once to end the call.
• Rejecting a Call: When a call comes in, press and hold the Play/Pause button (▶) for a few seconds to reject the call.
• Redialing Last Number: In standby mode, double-press the Play/Pause button (▶) to redial the last number.

6. Controls:

The speaker features intuitive controls, typically located on the top or rear panel.

• Power Button (Ⓢ): Press and hold to power on/off.
• Play/Pause Button (▶): Press to play or pause music. Also used for call management.
• Volume Up (+) / Next Track: Short press for volume up. Long press for next track.
• Volume Down (-) / Previous Track: Short press for volume down. Long press for previous track.
• Mode Button (M): Press to switch between Bluetooth, USB, and AUX-IN modes.
• TWS Button (∑): Press and hold to initiate TWS pairing.
• Light Mode Button (☀): Press to cycle through different RGB lighting effects or turn them off.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Water Resistance: The speaker is water-resistant, but not fully waterproof. Avoid submerging it in water. Ensure all port covers are securely closed before exposure to water.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the speaker regularly, even if not in use for extended periods.
• Handling: Avoid dropping the speaker or subjecting it to strong impacts.

Troubleshooting

Specifications

• Model: XR 8A30
• Output Power: 20W
• Connectivity: Bluetooth, USB, AUX-IN
• Bluetooth Range: Up to 10 meters (33 feet)
• Audio Output Mode: Stereo
• Speaker Type: Woofer
• Tweeter Driver Diameter: 1 Inch
• Microphone: 1 (Built-in for hands-free calls)
• MP3 Player: Yes (via USB)
• Water Resistance Level: Water-resistant (material resistant to water)
• Control Method: Touchpad, App
• Average Battery Life (Standby): 500 Hours
• Dimensions (D x W x H): 5 cm x 5 cm x 20 cm (approx. 2 x 2 x 7.9 inches)
• Weight: 626 Grams (approx. 1.38 lbs)
• Recommended Use: For smartphones or tablets, various outdoor activities, pool entertainment, travel.
• Material: Water-resistant material
• GTIN: 08011000028538

Warranty and Support

Your Trevi XR Jump Amplified Bluetooth Speaker XR 8A30 comes with a 24-month manufacturer's warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use.

The warranty does not cover:

• Damage caused by improper use, negligence, or accidents.
• Normal wear and tear.
• Damage caused by unauthorized repairs or modifications.
• Damage from exposure to extreme conditions beyond the product's specifications (e.g., full submersion in water).

For warranty claims or technical support, please contact Trevi customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number (XR 8A30) ready.

For more information, visit the official Trevi website: www.trevi.it