DJXFLI 90W LED Moving Head DJ Light Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe operation, installation, and maintenance of your DJXFLI 90W LED Moving Head DJ Light. Please read this manual thoroughly before use to ensure proper function and to prevent damage to the unit or injury to personnel.

2. Safety Information

• Always connect the unit to a grounded power outlet.
• Ensure the power voltage matches the specified voltage for the unit.
• Do not operate the unit if the power cord is damaged.
• Avoid direct eye exposure to the light source.
• Keep the unit away from rain, moisture, and extreme temperatures.
• Ensure adequate ventilation around the unit to prevent overheating.
• Only qualified personnel should perform repairs.

3. Package Contents

Verify that all items are present and in good condition upon unpacking:

• 1 x DJXFLI 90W LED Moving Head Light
• 1 x User Manual
• 1 x Power Cable (US standard plug, 1.2m)
• 1 x DMX Cable (1m)
• 1 x Bow Mount + 2pcs Screws

4. Product Overview

The DJXFLI 90W LED Moving Head DJ Light is a compact stage lighting fixture designed for various applications. It features a 90W RGBW LED source, offering a range of colors and effects.

Figure 4.1: Front view of the DJXFLI 90W LED Moving Head DJ Light displaying various color beams.

Key Features:

• Light Source: 90W RGBW LED (4-in-1 mono-colors)
• Beam Angle: 2 degrees
• Strobe: Up to 10 flashes per second
• Movement: Pan 540°, Tilt 180°
• Control Modes: DMX512, Auto, Sound Control, Master/Slave
• Channels: 12 DMX channels
• Control Panel: 4-button digital LED display for mode selection and settings.

Figure 4.2: Product dimensions showing height, width, and depth measurements.

Figure 4.3: Various perspectives of the moving head light, including front, side, and rear views.

5. Setup

5.1 Mounting

The moving head light can be installed on a truss or wall using the provided bow mount and screws. Ensure the mounting surface is stable and capable of supporting the unit's weight. Always use a safety cable (not included) when suspending the unit.

5.2 Connections

Connect the power cable to a suitable 110V AC power source. For DMX control, connect DMX cables to the DMX IN and DMX OUT ports located on the rear of the unit.

Figure 5.1: Detailed view of the rear panel showing Power In, DMX In, and DMX Out ports.

6. Operating Modes

The unit features a 4-button control panel and a digital LED display for mode selection and parameter adjustment. The light can operate in four primary modes:

Figure 6.1: Control panel with 4 buttons and LCD menu display, illustrating 540° Pan and 180° Tilt rotation.

6.1 Control Panel Operation

Use the 'MENU', 'UP', 'DOWN', and 'ENTER' buttons on the display screen to navigate and select modes or adjust settings. The unit can recall the last operation, eliminating the need for frequent resets.

6.2 DMX512 Mode

Connect the unit to a DMX controller using the provided DMX cable. The light utilizes 12 DMX channels, allowing for precise control over pan, tilt, color, strobe, and other effects. Refer to the DMX channel chart in the appendix (if available) for specific channel functions.

6.3 Auto Mode

In Auto mode, the light will cycle through pre-programmed patterns and color changes automatically. This mode is suitable for standalone operation without external control.

6.4 Sound Control Mode

The unit features a built-in microphone that allows it to react to ambient sound. In Sound Control mode, the light's movements and effects will synchronize with the beat of the music.

6.5 Master/Slave Mode

Connect multiple units via DMX cables. Configure one unit as the Master and the others as Slaves. The Slave units will then mirror the actions of the Master unit, creating synchronized lighting effects.

Figure 6.2: Illustration of the light's color mixing capabilities, creating various hues from RGBW LEDs.

Figure 6.3: Example of the color wheel effect, showcasing dynamic color changes and patterns.

7. Maintenance

7.1 Cleaning

Regularly clean the lens and exterior casing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and unplugged before cleaning.

7.2 Cooling System

The unit is equipped with a cooling system to prevent overheating. Ensure that the cooling vents are not obstructed. Periodically check for dust accumulation in the vents and clean as necessary to maintain optimal airflow.

8. Troubleshooting

• No Power: Check power cable connection and ensure the power outlet is functional.
• No Light Output: Verify power, check mode settings, and ensure no internal damage.
• No DMX Control: Check DMX cable connections, DMX address settings, and ensure the DMX controller is functioning correctly.
• Erratic Movement: Ensure the unit is on a stable surface or securely mounted. Check for any obstructions to movement.
• Overheating: Ensure cooling vents are clear and the unit has sufficient space for ventilation.

9. Specifications

10. Support and Warranty

For any questions or assistance, please contact DJXFLI customer support. We are committed to responding within 24 hours and assisting with problem resolution.

Refer to your purchase documentation for specific warranty terms and conditions.