Product Overview
The CINCOM CM-078A Leg Massager provides targeted air compression therapy with optional heat for leg, calf, and foot recovery. It features multiple intensity levels and massage modes to help relieve soreness, reduce swelling, and improve circulation.
- Targeted 4-Zone Air Compression Therapy: Customized massage from 4 independent air chambers around calves and thighs. Helps relieve soreness, reduce swelling, and improve leg circulation.
- 3 Adjustable Intensities & 3 Modes: Choose from 3 compression levels (Min, Mid, Max) and 3 massage modes (Sequence, Circulation, Combination).
- Optional Heat Feature: Adjustable heat levels (Min, Mid, Max) for enhanced relaxation and therapy.
- Ergonomic & Size-Inclusive Design: Zippered leg wraps are easy to wear and adjust, fitting most leg sizes comfortably.
- User-Friendly: Equipped with a simple LCD controller, auto shut-off timer (10/20/30 mins), and overheat protection.
Safety Information
Use this device with caution and always follow the manufacturer's instructions to prevent injury. Consult a doctor before using if you have any of the following conditions:
- Using a pacemaker or other medical devices susceptible to electrical interference.
- Suffering from malignant tumors.
- Suffering from cardiac diseases.
- Having serious peripheral neuropathy dysfunction or sensory disturbance caused by diabetes.
- Being unsuitable for massage due to traumas on the body.
Keep out of reach of infants, children, and people unable to use it independently. Do not use another power adapter other than the original one. Do not scratch, damage, process, excessively bend, pull, or twist the power cord of the power adapter. Otherwise, it may cause fire or electric shock. Do not use if the power adapter malfunctions or the plug is loose.
Setup
- Unpack the leg massager components: two leg wraps, LCD handheld controller, power adapter, and travel bag.
- Ensure both leg wraps are fully deflated before wearing.
- Wear the leg wraps on your legs, ensuring a comfortable but snug fit. The zippered design allows for easy adjustment.
- Connect the air hoses from the leg wraps to the controller. Ensure the "UP" mark on the hose connector aligns with the "UP" mark on the controller's port.
- Plug the power adapter into the controller and then into a power outlet.
Image: All components of the CINCOM Leg Massager, including the leg wraps, controller, power adapter, and travel bag.
Image: The handheld LCD controller showing the connection points for the air hoses and power adapter. The "UP" mark on the hose connector is visible.
Operating Instructions
The CINCOM CM-078A Leg Massager offers various modes, intensities, and heat levels for a personalized massage experience. It is recommended to start with the lowest intensity and heat settings for your first use.
Controller Functions:
- Power Button: Press to turn ON/OFF.
- Mode Button (M): Cycles through massage modes: Sequence, Circulation, Combination.
- Intensity Button (▲): Adjusts compression strength (Min, Mid, Max).
- Heat Button (♨): Adjusts heat level (Min, Mid, Max) or turns OFF.
Massage Modes:
- Sequence Mode: Foot & Lower Calf chambers compress and hold pressure, then Upper Calf & Thigh chambers compress and hold pressure. All 4 chambers release at the same time. This cycle repeats after a brief rest period.
- Circulation Mode: Foot & Lower Calf chambers compress and hold pressure, then Upper Calf & Thigh chambers compress and hold pressure. All 4 chambers release at the same time. This cycle repeats after a brief rest period.
- Combination Mode: Alternates between Sequence Mode and Circulation Mode until the session time runs out.
The massager has an auto shut-off timer (10/20/30 minutes) to prevent overuse. It is recommended to use it once or twice a day, no more than 30 minutes at a time.
Image: The LCD screen of the controller displaying the current mode (Combination, Circulation, Sequence), strength level (Min, Mid, Max), and heat level (Min, Mid, Max).
Maintenance
To ensure the longevity and hygiene of your CINCOM Leg Massager, follow these maintenance guidelines:
- Wipe the exterior of the leg wraps with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Ensure the device is completely dry before storing.
- Store the massager in its provided travel bag in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Massager does not work when power button is pressed. | Air hoses not properly inserted into the controller. | Ensure both air hoses are fully inserted into the controller. |
| Controller gets hot. | Normal phenomenon if kept working too long (e.g., 20 minutes per session). | This is normal. Allow the controller to cool down if it feels excessively hot. |
| Controller makes sound. | Sound comes from the working air pump in the controller, providing air continuously to the airbags. | This is a normal phenomenon. |
| Heat is not felt or is too hot. | Heating function is optional. Thickness of clothing can affect heat transfer. | Adjust heat level. Wear thinner or thicker pants as needed. |
Specifications
- Product Dimensions: 16.14 x 7.48 x 9.65 inches
- Item Model Number: CM-078A
- Item Weight: 5.51 Pounds (2.5 Kilograms)
- Material: Plastic
- Power Source: Corded Electric
- Use for: Legs
- Manufacturer: CINCOM
- Date First Available: April 19, 2022
Warranty and Support
For any questions or support regarding your CINCOM Leg Massager, please contact our after-sales team. Refer to the product packaging or included documentation for specific contact details.
Product Videos
Video: A detailed review of the CINCOM Leg Massager, showcasing its features and operation. This video provides an unboxing and demonstration of the product's various settings and how it feels during use.
Video: A user testing the CINCOM Upgraded Full Leg Massage System, demonstrating how to wear the boots, connect the controller, and adjust settings for a full leg massage experience.