Auraglow Solar Lotus Flower Lantern

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Auraglow Solar Lotus Flower Garden Lantern

Instruction Manual

1. Introduction

Thank you for choosing the Auraglow Solar Lotus Flower Garden Lantern. This elegant outdoor light is designed to enhance your garden, patio, or terrace with its unique lotus flower design and warm illumination. Powered by solar energy, it offers an eco-friendly and convenient lighting solution with automatic dusk-to-dawn operation. Please read this manual carefully before first use to ensure proper installation and optimal performance.

2. Safety Information

  • Ensure the lantern is placed in a location where it receives direct sunlight for at least 6-8 hours daily to ensure full charge.
  • Do not attempt to open or modify the product, as this may void the warranty and cause damage.
  • Keep the solar panel clean and free from debris to maintain charging efficiency.
  • The product contains a rechargeable battery. Dispose of batteries responsibly according to local regulations.
  • This product is designed for outdoor use and is IP44 weather-resistant. However, avoid submerging it in water.

3. Package Contents

Please check the package for the following items:

  • 1 x Auraglow Solar Lotus Flower Garden Lantern
  • 1 x Rechargeable NiMh 1.2V/300mAh AAA Battery (pre-installed)

4. Setup

  1. Unpack: Carefully remove the lantern from its packaging.
  2. Activate: Locate the ON/OFF switch on the base of the lantern. Slide the switch to the "ON" position.
  3. Initial Charge: Place the lantern in a location that receives maximum direct sunlight for at least 6-8 hours. This allows the internal battery to fully charge before its first use.
  4. Placement: Position the lantern in your desired outdoor area, such as a flower bed, lawn, patio, or terrace. Ensure the solar panel is unobstructed by shadows from buildings, trees, or other objects.
Auraglow Solar Lotus Flower Garden Lantern illuminated in a garden setting

Image 1: The Auraglow Solar Lotus Flower Garden Lantern illuminated in a garden setting, showcasing its design and light effect.

5. Operating Instructions

  • Once the ON/OFF switch is in the "ON" position and the battery is charged, the lantern will operate automatically.
  • The integrated dusk-to-dawn sensor will detect when ambient light levels drop, automatically turning the LED light on at nightfall.
  • The light will remain on for up to 6 hours on a full charge.
  • At dawn, or when the battery is depleted, the light will automatically turn off and begin recharging during daylight hours.

6. Maintenance

  • Cleaning: Periodically wipe the solar panel and the lantern's surface with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures efficient charging.
  • Battery Replacement: The included rechargeable AAA NiMh battery typically lasts about 24 months. If the light duration significantly decreases, the battery may need replacement. To replace, carefully open the battery compartment (usually located on the underside or within the base), remove the old battery, and insert a new rechargeable NiMh 1.2V AAA battery, ensuring correct polarity.
  • Winter Storage: During prolonged periods of low sunlight or harsh winter conditions, you may choose to store the lantern indoors. Ensure the switch is in the "OFF" position before storage.

7. Troubleshooting

ProblemPossible CauseSolution
Lantern does not light up at night.1. Switch is OFF.
2. Insufficient sunlight for charging.
3. Solar panel is dirty.
4. Battery is depleted or faulty.
1. Ensure the switch is in the "ON" position.
2. Relocate the lantern to an area with more direct sunlight.
3. Clean the solar panel.
4. Replace the rechargeable AAA battery.
Light is dim or lasts for a short period.1. Insufficient charge.
2. Solar panel is dirty.
3. Battery is old or not holding charge.
1. Ensure the lantern receives full direct sunlight for 6-8 hours.
2. Clean the solar panel.
3. Replace the rechargeable AAA battery.
Lantern turns on during the day.Light sensor is obstructed or faulty.Ensure no external light source (e.g., street light) is directly shining on the solar panel at night, confusing the sensor. If the problem persists, contact customer support.

8. Specifications

Close-up view of the Auraglow Solar Lotus Flower Garden Lantern, showing cracked glass detail

Image 2: Close-up view of the Auraglow Solar Lotus Flower Garden Lantern, highlighting the cracked glass and metal petal details.

  • Brand: Auraglow
  • Model: Solar Lotus Flower Lantern
  • Light Source: Cool White LED
  • Battery: 1 x Rechargeable NiMh 1.2V/300mAh AAA (included)
  • Charging Type: Solar Powered
  • Operating Time: Up to 6 hours on a full charge
  • Protection Rating: IP44 (Weather-resistant)
  • Material: Iron (powder-coated), Glass
  • Color: Brick Red (petals), White (light)
  • Switch Type: Push Button (ON/OFF)
  • Mounting Type: Freestanding / Floor mounting
  • Dimensions: Approximately 260 mm (Height) x 110 mm (Diameter)
  • Features: Automatic Dusk-to-Dawn Sensor, Rechargeable

9. Warranty and Support

Auraglow products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please contact Auraglow customer service through the retailer where the product was purchased. Please retain your proof of purchase for warranty purposes.

© 2023 Auraglow. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.