Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your QINIZX Digital 2.1 Channel Subwoofer Amplifier Board. This compact amplifier board is designed for various audio applications, including home TV audio, car speakers, multimedia audio, and computer desktop speaker systems. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
Product Specifications
| Feature | Specification |
|---|---|
| Model Number | 2.1CH 6W+6W+25W |
| Output Power (Left/Right Channel) | 6W + 6W |
| Output Power (Bass Channel) | Maximum 25W |
| Recommended Left/Right Speakers | 2-4 inch, 4-8Ω, 3-25W full-range speakers |
| Recommended Bass Speaker | 4-6 inch, 4-6Ω, 20-50W subwoofer speaker |
| Power Input | DC 6.5V - 15V (Recommended >13.5V DC for optimal performance) |
| Recommended Current | >3A |
| Power Interface | 5.5*2.1 DC socket or welding pad |
| Audio Input Interface | 3.5mm plug or welding pad |
| Amplifier Chip | TDA1517P |
| Board Dimensions (LxWxH) | 2.48 x 1.77 x 0.78 inches (excluding potentiometer handle) |
| Potentiometer Handle Length | 0.59 inches |
| Potentiometer Shaft Center Distance | 0.94 inches (24mm) |
| Potentiometer Mounting Hole Diameter | 0.28 inches (7mm) |
| PCB Material | FR-4 fiberglass board, 1.6mm thickness |
What's in the Box
- 1 x QINIZX 2.1 Channel Amplifier Board
Setup Instructions
Follow these steps to correctly set up your amplifier board:
1. Identify Components
Familiarize yourself with the various connection points and controls on the amplifier board.

Image: Top view of the amplifier board with key components labeled, including power input, audio input, speaker outputs, and volume potentiometers.
- DC 5.5-2.1mm Power Input: Located at the top right, for connecting the power supply.
- Power Welding Pad: Alternative power input connection point.
- 3.5mm Audio Input: Located on the right side, for connecting audio sources.
- Audio Input Welding Pad: Alternative audio input connection point.
- Left/Right Channel Output: Blue screw terminal block on the top left for connecting stereo speakers.
- Bass Output: Blue screw terminal block on the top left for connecting the subwoofer.
- Total Volume Potentiometer: The rightmost knob for overall volume control.
- Bass Volume Potentiometer: The leftmost knob for adjusting bass level.
- M3 Fixing Hole: Mounting holes for securing the board.
2. Power Connection
- Ensure the amplifier board is disconnected from all other components before connecting power.
- Connect a DC power supply (6.5V to 15V, recommended >13.5V DC with >3A current) to the 5.5*2.1mm DC socket or solder wires to the designated power welding pads.
- Verify correct polarity if using welding pads.
3. Audio Input Connection
- Connect your audio source (e.g., smartphone, computer, TV) to the 3.5mm audio input jack using a standard 3.5mm audio cable.
- Alternatively, solder audio input wires to the audio input welding pads (L, G, R for Left, Ground, Right).
4. Speaker Connections
Connect your speakers to the blue screw terminal block. Ensure correct polarity (+/-) for each speaker.

Image: Angled view of the amplifier board, highlighting the blue screw terminal block for speaker connections.
- Left and Right Channels: Connect your 2-4 inch, 4-8Ω, 3-25W full-range speakers to the "L+" and "L-" terminals for the left channel, and "R+" and "R-" terminals for the right channel.
- Bass Channel: Connect your 4-6 inch, 4-6Ω, 20-50W subwoofer speaker to the "BASS+" and "BASS-" terminals.

Image: Top-down view of the amplifier board, showing speaker wires connected to the blue terminal block.
Note: Ensure all connections are secure to prevent short circuits or poor audio quality.
Operating Instructions
Once all connections are made, you can begin operating your amplifier board.
1. Power On
Connect the power supply to an electrical outlet. The amplifier board will power on automatically as there is no dedicated power switch. It is recommended to turn the volume knobs to their minimum position before powering on to avoid sudden loud sounds.
2. Adjust Volume
- Total Volume: Rotate the rightmost potentiometer knob clockwise to increase the overall volume.
- Bass Volume: Rotate the leftmost potentiometer knob clockwise to increase the bass level.
3. Audio Playback
Start playing audio from your connected source. Adjust the volume controls on both your audio source and the amplifier board to achieve the desired sound level and balance.

Image: An example application setup showing the amplifier board connected to a smartphone, two satellite speakers, and a subwoofer.
Maintenance
- Keep the amplifier board in a dry, dust-free environment.
- Avoid exposing the board to extreme temperatures or direct sunlight.
- Do not use harsh chemicals or abrasive materials for cleaning. A soft, dry cloth is sufficient.
- Ensure adequate ventilation around the board during operation to prevent overheating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output |
|
|
| Distorted sound |
|
|
| Popping sound when powering on/off |
|
|
Warranty and Support
No specific warranty information is provided with this product. For technical support or inquiries, please refer to the seller or manufacturer, QINIZX, through your purchase platform.