Introduction
This manual provides instructions for the operation and maintenance of your YAOHUIMI Replacement Remote Control, model A420220416-050. This remote control is designed to be a direct replacement for various Gree Split Air Conditioner models, offering full functionality without the need for programming or pairing.
Compatible Models include:
- GWH09QC-D3DNB2D, GWH09QC-D3DNB4D
- GWC12QC-D3DNB2D, GWC12QC-D3DNB4D, GWC12QC-D3DNA1D
- GWH12QC-D3DNA1D, GWH12QC-D3DNB2D, GWH12QC-D3DNB4D
- VIR09HP115V1AH, VIR09HP230V1AH, VIR12HP115V1AH, VIR12HP230V1AH, VIR18HP230V1AH, VIR24HP230V1AH, VIR30HP230V1AH
- GWH12QC-A3DNA1D, GWC12QC-A3DNB2D, GWC12QC-A3DNB4D/I, GWH12QC-A3DNB2D, GWH12QC-A3DNB4D/I
- GWC09QC-D3DNA1D, GWH09QC-D3DNA1D, GWC09QC-D3DNB2D
- And many other Gree models as specified in the product listing.
Please verify your original remote control model or AC unit model number before use to ensure compatibility.
Setup
Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open the compartment.
- Insert two AAA batteries (not included) according to the polarity indicators (+ and -) inside the compartment.
- Close the battery compartment cover by sliding it back into place until it clicks securely.
The remote control is ready for use immediately after battery installation. No programming or pairing is required.
Image: Front view of the YAOHUIMI Replacement Remote Control, showing the digital display and various function buttons.
Operating Instructions
Point the remote control directly at the indoor unit of your air conditioner. Ensure there are no obstructions between the remote and the unit.
Button Functions:
| Button | Function |
|---|---|
| Power (Red Button) | Turns the air conditioner ON or OFF. |
| MODE | Cycles through operating modes: Auto, Cool, Dry, Fan, Heat. |
| FAN | Adjusts fan speed: Auto, Low, Medium, High. |
| SWING | Controls the vertical louver movement for air distribution. |
| TURBO | Activates rapid cooling or heating for quick temperature changes. |
| SLEEP | Activates sleep mode, which adjusts temperature and fan speed for comfortable sleep and energy saving. |
| TEMP (Up/Down Arrows) | Adjusts the desired temperature setting. The display supports both Fahrenheit and Celsius. |
| CLOCK | Sets the current time on the remote's display. |
| I FEEL | Activates the 'I Feel' function, where the remote's built-in sensor measures the ambient temperature and sends the information to the AC unit for more precise temperature control around the remote. |
| LIGHT | Turns the display light on or off on the indoor unit. |
| TIMER ON / OFF | Sets a timer for the air conditioner to turn ON or OFF automatically. |
Image: Side view of the YAOHUIMI Replacement Remote Control, shown in a white wall-mount holder.
Maintenance
Battery Replacement
Replace batteries when the remote control's display becomes dim or the remote fails to operate the air conditioner. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries or different types of batteries.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, abrasive cleaners, or chemical sprays, as these may damage the remote's surface or internal components.
Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote control and the air conditioner's indoor unit.
- Make sure you are within the effective operating range of the air conditioner.
- Display is dim or blank:
- Replace the batteries.
- Air conditioner not responding to specific commands:
- Ensure the remote control is pointed directly at the air conditioner.
- Verify that the air conditioner unit is powered on.
- Some functions may be specific to certain AC models; refer to your AC unit's manual for full compatibility.
Specifications
- Model Number: A420220416-050
- Brand: YAOHUIMI
- Compatible Devices: Gree Split Air Conditioners (various models, see Introduction for examples)
- Controller Type: Button Control
- Special Features: Ergonomic design, Display in both Fahrenheit and Celsius
- Power Source: 2 x AAA Batteries (not included)
Warranty and Support
This replacement remote control is designed for reliable operation. For any issues or questions regarding its functionality, please contact the seller or retailer from whom you purchased the product. Keep your purchase receipt for reference.
Specific warranty details may vary by retailer. Please consult your purchase documentation for information on returns or replacements.
