JMEXSUSS 100 LED Purple String Lights Instruction Manual

Introduction

Thank you for choosing JMEXSUSS 100 LED Purple String Lights. This manual provides essential information for the safe and effective use of your new lighting product. Please read these instructions carefully before installation and operation, and retain for future reference.

Product Overview

The JMEXSUSS 100 LED Purple String Lights are designed for both indoor and outdoor decorative lighting. Each pack contains two 33-foot strands, totaling 200 LEDs, providing vibrant purple illumination. These lights are connectable, allowing for extended coverage, and feature multiple lighting modes with a built-in timer function.

Key Features:

• Vibrant Purple Illumination: Each pack includes two 33ft strands with 100 bright purple LEDs per strand, offering a total of 66ft and 200 LEDs.
• Connectable Design: Easily connect up to 10 strands (maximum 1000 LEDs) to cover larger areas for extensive decoration.
• 8 Lighting Modes: Customize your display with various effects including Combination, In Waves, Sequential, Slo-Glo, Chasing/Flash, Slow Fade, Twinkle/Flash, and Steady On.
• Timer Function: Features a built-in timer (6 hours on / 18 hours off) for convenient automated operation. Activate by pressing the button on the plug for 3 seconds.
• IP44 Waterproof Rating: Designed to withstand outdoor elements such as rain and fog, making them suitable for outdoor use.
• UL Certified Safety: Equipped with a low-voltage (24V) plug, rigorously tested for safe indoor and outdoor application, preventing overheating and electrical shocks.

Package Contents

• 2 x 33ft (100 LED) Purple String Lights
• 1 x Power Adapter with Control Button
• 1 x User Manual

Setup Instructions

1. Unpack: Carefully remove the string lights and all components from the packaging. Untangle the wires gently to avoid damage.
2. Placement: Determine the desired location for your lights. Ensure the power adapter is placed in a dry, protected area, especially for outdoor installations.
3. Connect Strands (Optional): If using multiple sets, connect the male connector of one strand to the female connector of another. Ensure connections are secure and sealed if exposed to weather. Up to 10 strands can be connected end-to-end.
4. Secure Lights: Use appropriate clips or ties to secure the string lights along your desired path (e.g., around a tree, along a fence, or indoors). Avoid pulling or stretching the wire excessively.
5. Power Connection: Plug the power adapter into a standard electrical outlet (120V AC).

Figure 1: Illustration of connecting multiple string light strands.

Operating Instructions

1. Power On/Off: Once plugged in, the lights will automatically turn on. To turn off, unplug the power adapter.
2. Changing Lighting Modes: Press the button on the power adapter to cycle through the 8 available lighting modes. Each press will switch to the next mode.
3. Activating Timer Function: To activate the 6-hour on/18-hour off timer, press and hold the button on the power adapter for approximately 3 seconds. The lights will flash once to confirm the timer is set. The lights will then stay on for 6 hours and turn off for 18 hours, repeating the cycle daily.
4. Deactivating Timer Function: To deactivate the timer, press and hold the button on the power adapter for 3 seconds again. The lights will flash twice to confirm the timer is off.

Figure 2: Visual representation of the 8 lighting modes.

Lighting Modes

The string lights offer 8 distinct lighting modes to suit various preferences and occasions:

1. Combination: Cycles through all modes automatically.
2. In Waves: Lights fade in and out in a wave-like pattern.
3. Sequential: Lights illuminate in sequence.
4. Slo-Glo: Lights slowly glow on and off.
5. Chasing/Flash: Lights chase and flash rapidly.
6. Slow Fade: Lights slowly fade from bright to dim.
7. Twinkle/Flash: Lights twinkle and flash intermittently.
8. Steady On: All lights remain continuously lit.

Maintenance and Care

• Cleaning: Disconnect from power before cleaning. Wipe lights and wires with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: When not in use, carefully coil the string lights and store them in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the lights and wiring for any signs of damage, such as frayed wires or cracked bulbs. Do not use damaged lights.

Troubleshooting

Specifications

• Model Number: EXS-S-0100
• Light Color: Purple
• Number of LEDs: 100 per strand (200 total per pack)
• Length: 33 feet per strand (66 feet total per pack)
• Power Source: Corded Electric
• Voltage: 24V (Low Voltage)
• Wattage: 5 watts
• Water Resistance: IP44 Waterproof
• Material: Copper Wire
• Certifications: UL Certified
• Max Connectable Strands: 10 (1000 LEDs)

Safety Information

• Always unplug the lights from the power source before installation, maintenance, or when not in use.
• Do not immerse the power adapter in water. Ensure it is protected from direct rain and moisture.
• Do not connect the lights to a power source while they are still in the packaging.
• Do not secure the wiring with staples or nails, or place it on sharp objects that could damage the insulation.
• Keep away from heat sources and open flames.
• This product is not a toy. Keep out of reach of children and pets.
• Only use with the provided power adapter.

Figure 3: Waterproof design for outdoor durability.

Warranty and Support

For warranty information or technical support, please contact JMEXSUSS customer service through the retailer's platform or visit the official JMEXSUSS website. Please have your model number (EXS-S-0100) and purchase details ready.