Herdio Marine Radio Package User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Herdio Marine Radio Package. This package includes an IPX6 Bluetooth-compatible receiver, a pair of 4-inch marine speakers, and an AM/FM antenna, designed for use in marine environments, ATVs, and UTVs.

Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Safety Information

• Ensure all wiring is correctly connected to prevent electrical shorts or damage.
• Disconnect power before performing any installation or maintenance.
• This product is designed for marine environments with IPX6 water resistance. However, avoid submerging the unit.
• Do not attempt to repair the unit yourself. Refer to qualified service personnel.
• Maintain appropriate volume levels to ensure awareness of your surroundings, especially when operating vehicles.

3. Package Contents

Verify that all items are present in your package:

• 1 Herdio Marine USB AUX AM/FM Radio Receiver
• 1 Pair of Herdio 100W 4-inch 2-Way Mount Marine Speakers (Black)
• 1 Herdio Flexible Waterproof Marine Antenna
• Mounting hardware and wiring (included with components)

Image 3.1: Contents of the Herdio Marine Radio Package, including the circular receiver, two square marine speakers, and a flexible AM/FM antenna with its cable.

4. Features

• IPX6 Water Resistance: Designed to withstand powerful water jets, suitable for marine environments.
• Bluetooth Connectivity: Wireless audio streaming from smartphones, tablets, and other Bluetooth-enabled devices (up to 10 feet range).
• Multiple Audio Inputs: AM/FM radio, USB port for digital audio files, and front AUX input for external devices.
• Compact Design: Receiver features a standard 3.15-inch (80mm) cutout diameter for easy integration.
• Durable Speakers: 4-inch 2-way marine speakers with 100W maximum power handling per pair.
• Flexible Antenna: 16.9-inch mast with a 55-inch cable for optimal reception.

Image 4.1: Icon indicating IPX6 water resistance.

Image 4.2: Icon representing USB connectivity.

Image 4.3: Icon for the front AUX input.

Image 4.4: Icon indicating no CD player functionality.

5. Setup and Installation

Proper installation is crucial for optimal performance and durability. Refer to the following steps and diagrams.

5.1. Receiver Installation

1. Choose Mounting Location: Select a flat surface on your boat, ATV, or UTV dashboard that allows for the receiver's mounting depth and provides clear visibility and access to controls.
2. Cutout: Use the provided template (if applicable) or measure carefully. The receiver requires a cutout diameter of 3.15 inches (80mm) and a mounting depth of 3.5 inches (90mm).
3. Secure Receiver: Insert the receiver into the cutout and secure it using the supplied mounting bracket and screws.

5.2. Speaker Installation

1. Mounting Location: Position the 4-inch marine speakers in desired locations, ensuring they are securely mounted and have adequate clearance. Speaker dimensions are 4.4 inches (W) x 4.4 inches (H) x 4 inches (D).
2. Wiring: Connect the speaker wires to the receiver's speaker outputs. Ensure correct polarity (+ to + and - to -) for each speaker. The package includes 5-meter speaker cables.

5.3. Antenna Installation

1. Mounting: Install the flexible marine antenna in a location that provides good signal reception and is clear of obstructions.
2. Connection: Connect the antenna cable (55 inches long) to the antenna input on the receiver.

5.4. Wiring Diagram (General)

A typical wiring setup involves connecting the receiver to a 12V DC power source (red wire to positive, black wire to negative/ground), connecting speaker wires, and the antenna. Consult a professional if you are unsure about electrical connections.

Image 5.1: Visual guide for easy installation, showing steps to set up the radio, extend speaker cables, place marine speakers, and connect wires.

Image 5.2: Detailed dimensions for the marine speakers and the circular receiver, showing width, height, depth, and cutout measurements.

Image 5.3: Measurements of the marine antenna, including mast length (16.9 inches/43cm), cable length (55 inches/139.7cm), and a demonstration of its flexible rubber construction.

6. Operating Instructions

Familiarize yourself with the receiver's controls for seamless audio experience.

6.1. Basic Controls

• Power Button (⏻): Press to turn the unit on or off.
• Volume Up/Down (VOL +/-): Adjust the audio output level.
• Mute Button (MUTE): Temporarily silence the audio. Press again to restore.
• Select Button (SEL): Cycle through audio sources (AM/FM, Bluetooth, USB, AUX).
• AMS Button (AMS): Auto Memory Store for radio stations.
• Track/Tune Buttons (⏮ / ⏭): Skip tracks in USB/Bluetooth mode or tune radio frequencies.

6.2. Bluetooth Operation

1. Enable Bluetooth: Press the SEL button until "Bluetooth" mode is selected. The display will indicate pairing mode.
2. Pairing: On your mobile device, search for available Bluetooth devices and select "Herdio" (or similar name). Enter "0000" if a passcode is required.
3. Playback: Once paired, you can stream audio from your device. Use the track buttons on the receiver or your device to control playback.

Image 6.1: The Herdio marine receiver displaying "FM 87.5" with a Bluetooth logo, and a hand holding a smartphone playing music, illustrating Bluetooth compatibility.

6.3. AM/FM Radio

1. Select Mode: Press the SEL button to switch to AM or FM radio mode.
2. Tuning: Use the track buttons (⏮ / ⏭) to manually tune frequencies. Press and hold for automatic seek.
3. Preset Stations: Use the AMS button to automatically scan and store strong stations.

6.4. USB Playback

1. Insert USB: Plug a USB drive containing audio files into the USB port.
2. Select Mode: Press the SEL button to switch to USB mode. The unit will automatically begin playing compatible audio files.
3. Control: Use the track buttons (⏮ / ⏭) to navigate between songs.

6.5. AUX Input

1. Connect Device: Connect an external audio device (e.g., MP3 player) to the front AUX input using a 3.5mm audio cable.
2. Select Mode: Press the SEL button to switch to AUX mode.
3. Control: Audio playback is controlled directly from the connected external device.

7. Maintenance

• Cleaning: Wipe the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Water Exposure: While IPX6 rated, prolonged exposure to direct high-pressure water sprays should be avoided. Ensure all covers and caps are securely closed.
• Connections: Periodically check all wiring connections for corrosion or looseness, especially in marine environments.

8. Troubleshooting

9. Specifications

10. Warranty Information

Herdio products are covered by a manufacturer's warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please refer to the warranty card included with your product or contact Herdio customer support.

11. Customer Support

If you encounter any issues or have questions regarding your Herdio Marine Radio Package, please contact Herdio customer support through the following channels:

• Online Support: Visit the official Herdio website for FAQs and support resources.
• Email: Refer to your product packaging or warranty card for customer service email addresses.
• Amazon Seller Page: You can also reach out to "Herdio Direct" via your Amazon order history for assistance.