FEZIBO Electric Standing Desk (Model JPX-SDX-JC-55W) - User Manual

1. Important Safety Information

1.1 Before Assembly

• Tools: A Phillips screwdriver is required.
• Work Area: To prevent scratches, perform assembly on a carpeted floor. Always work with at least two people. Ensure a clear space at least twice the size of the desktop.
• Initial Setup: After initial installation or reconnecting power, always perform a manual reset. Refer to the Operating Instructions for details.

1.2 For Safe Use

• Obstacles: Keep the desk away from walls during height adjustment. Do not place objects taller than 51cm under the desk.
• Child Safety: Ensure children do not play on, climb, or hang from the desk. Height adjustment can be dangerous.
• Anti-Collision Function: After a manual reset, the anti-collision function may need to be manually re-enabled.
• Operating Environment: The operating temperature range is 0°C to 40°C. Avoid corrosive substances and dusty areas.
• Care: Wipe the desk with a cloth dampened with a neutral detergent.

1.3 Disclaimer

The manufacturer is not responsible for malfunctions or injuries caused by improper use or failure to follow these instructions.

2. Assembly Instructions

This section guides you through the assembly process of your FEZIBO Electric Standing Desk. Please follow the steps carefully.

2.1 Assembly Video Guide

2.2 Step-by-Step Assembly

1. Unpack and Identify Parts: Carefully unpack all components. Refer to the parts list in the video (0:03-0:06) to ensure all items are present.
2. Assemble the Frame:
   • Attach the drive rod to the leg, ensuring correct orientation (distinguish between long and short sides). Do not install in reverse (video 0:06-0:15).
   • Attach the second leg. To prevent uneven height adjustment, use a wrench to align the hexagonal synchronization rod and insert it completely until the lock point engages. Placing the frame on the packaging can make this step easier (video 0:15-0:24).
   • Attach the crossbar, paying attention to its orientation. Ensure screws are inserted into the four screw holes, not just two (video 0:24-0:39).
   • Attach the feet to the assembled frame (video 0:39-0:55).
3. Assemble the Desktop:
   • If your desktop comes in multiple pieces, join them together. For scratch prevention, always work on a flat surface. Tighten screws while firmly pressing down on the tabletop to secure it (video 0:55-1:09).
   • Attach the control panel and any included hooks to the underside of the desktop (video 1:09-1:25).
4. Attach Frame to Desktop: Carefully place the assembled frame onto the desktop. Ensure the motor and controller are positioned on the left side of the desk (video 1:25-1:39). Secure the frame to the desktop using the provided screws.
5. Connect Cables and Lift: Connect all necessary cables. For safety, always lift the desk slowly with two or more people (video 1:39-1:46).

2.3 Assembly Aids

This image illustrates the desk dimensions, integrated cable management features, and convenient accessory hooks for headphones or bags.

Visual guidance for easy installation, combining a paper manual with an installation video for comprehensive support.

3. Operating Instructions

3.1 Height Adjustment

The FEZIBO Electric Standing Desk allows for smooth height adjustment to suit your ergonomic needs.

• Up/Down Buttons: Use the dedicated up and down buttons on the control panel to manually adjust the desk height.
• Memory Presets: The desk features a height memory function, allowing you to store two preferred heights. Once set, you can easily raise or lower the desk to your desired height with a single touch.

3.2 Control Panel

The multi-functional intelligent keyboard features up/down buttons, three preset buttons for storing favorite heights, and anti-collision technology indicators.

4. Features

• Stable and Quiet Operation: The powerful FEZIBO motor ensures stable height adjustment. Its ultra-quiet design limits lifting noise to 45dB, allowing for undisturbed use at any time.
• Durable and High-Quality Materials: The desktop is treated with melamine technology, making it resistant to water, heat, scratches, and dirt. The frame is constructed from sturdy industrial steel, ensuring overall stability and durability. It has been tested for 10,000 lifting cycles.
• Anti-Collision Function: The desk is equipped with an anti-collision system that detects obstacles or impacts during height adjustment and automatically stops movement. This prevents collisions and pinching, making it safe for households with children or pets.
• Ergonomic Height Range: The desk offers a height adjustment range of 72cm to 118cm (excluding desktop and adjusters), accommodating various user heights for both sitting and standing positions.
• Integrated Accessories: Includes a cable management hole, two desk hooks for headphones or bags, and supports monitor arm attachment.

This image compares the desk's quiet operation (45dB) to other common sounds, highlighting its low noise output.

Illustrates the ergonomic height range, showing optimal sitting and standing positions for various user heights.

Demonstrates the anti-collision technology, which automatically stops the desk's movement upon detecting an obstacle.

Highlights the environmentally friendly desktop material, emphasizing its durability and resistance to water, heat, scratches, and dirt.

5. Maintenance

To ensure the longevity and proper functioning of your FEZIBO Electric Standing Desk, follow these maintenance guidelines:

• Cleaning: Wipe the desk surfaces with a soft cloth dampened with a neutral detergent. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Regular Checks: Periodically check all screws and connections to ensure they are tight. Retighten if necessary.
• Obstacle Clearance: Always ensure the area around and under the desk is clear of obstacles before adjusting the height.

6. Troubleshooting

If you encounter any issues with your FEZIBO Electric Standing Desk, please refer to the following common troubleshooting steps:

• Desk Not Moving / Flashing Lights: If the desk does not respond to controls or the control panel lights are flashing, first check all power connections. Ensure the power cable is securely plugged into both the desk and the wall outlet.
• Perform a Reset: After checking connections, perform a manual reset. Consult the full assembly video or contact customer support for specific reset procedures.
• Uneven Height Adjustment: If the desk adjusts unevenly, ensure the hexagonal synchronization rod is fully inserted and locked into place as described in the assembly instructions.
• Anti-Collision Not Working: If the anti-collision feature is not active, it may need to be manually re-enabled after a reset. Refer to the operating instructions or contact support.
• Unusual Noises: While the desk is designed for quiet operation, if you hear unusual noises, stop operation and inspect for any obstructions or loose parts.

If these steps do not resolve the issue, please contact FEZIBO customer support for further assistance.

7. Specifications

8. Warranty and Support

FEZIBO is committed to providing high-quality products. Our desk frames are FCC certified, tabletops are EPA and CARB certified, and power accessories are ETL certified, ensuring compliance with industry standards.

FEZIBO products meet various quality and safety certifications, including CARB, FCC, and ETL.

For specific warranty details or technical support, please refer to the warranty card included with your product or visit the official FEZIBO website. Please note that the manufacturer is not responsible for malfunctions or injuries resulting from improper use.