VECELO 5-Piece Dining Table Set Instruction Manual

Introduction

Thank you for purchasing the VECELO 5-Piece Dining Table Set. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new dining set. Please read these instructions carefully before assembly and retain them for future reference.

Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact VECELO customer support.

• 1 x Dining Table
• 4 x Dining Chairs
• 1 x Instruction Manual (this document)
• 1 x Accessory Bag (containing hardware and tools)

Safety Information

• Adult Assembly Required: This product contains small parts and requires adult assembly. Keep children away during assembly.
• Weight Capacity: The dining table has a maximum recommended load of 250 pounds (113 kg). Each chair has a maximum recommended load of 275 pounds (125 kg). Do not exceed these limits.
• Stable Surface: Always assemble and use the dining set on a flat, stable, and level surface.
• Regular Inspection: Periodically check all bolts and screws to ensure they are tight. Retighten as necessary to maintain stability.
• Avoid Standing on Furniture: Do not stand on the table or chairs.
• Proper Use: Use the dining set only for its intended purpose as dining furniture.

Setup and Assembly

The VECELO dining set is designed for easy assembly. All necessary parts and tools are included and clearly labeled. Follow the instructions provided in the accessory bag step-by-step.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
2. Identify Parts: Refer to the included diagram in the accessory bag to identify each component (tabletop, table legs, chair seats, chair backs, chair legs, hardware).
3. Assemble Table: Attach the table legs to the tabletop using the provided hardware. Ensure all connections are secure but do not fully tighten until all parts are aligned.
4. Assemble Chairs: Assemble each chair by attaching the seat, backrest, and legs. Follow the specific chair assembly steps in the included diagram.
5. Final Tightening: Once all components are assembled and aligned, fully tighten all screws and bolts on both the table and chairs.

Image: Front view of the assembled dining table and four chairs.

Operating Instructions

This 5-piece dining set is designed to comfortably seat up to four people. The chairs feature cushioned seats and high backs for comfort during meals.

• Seating Capacity: The set is designed for four individuals.
• Space-Saving Design: The chairs can be neatly tucked away under the table when not in use, optimizing space in smaller dining areas.

Image: The dining set demonstrating how chairs can be stored under the table to save space.

Maintenance

Proper care will extend the life and appearance of your VECELO dining set.

• Cleaning: Wipe the table and chair surfaces with a dry cloth. For spills, use a slightly damp cloth immediately and then dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
• Hardware Check: Periodically inspect and tighten all screws and bolts to ensure the stability and safety of the furniture.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading or damage to the finish.
• Heat Protection: Use placemats or coasters to protect the tabletop from hot dishes and moisture.

Image: Detail of the rustic brown tabletop, highlighting its texture and finish.

Troubleshooting

If you encounter any issues with your dining set, refer to the following common solutions:

• Wobbling Table/Chairs: Ensure all bolts and screws are fully tightened. If wobbling persists, loosen all screws slightly, press down firmly on the wobbly component to level it, then retighten all screws.
• Loose Parts: If any part feels loose, immediately stop using the furniture and tighten the corresponding hardware.
• Scratches/Dents: Minor cosmetic damage can sometimes be touched up with furniture repair markers or kits matching the finish.

For issues not resolved by these steps, please contact VECELO customer support.

Specifications

Image: Detailed dimensions for the dining table and chairs.

Warranty and Support

VECELO provides an 18-MONTH Warranty for this dining table set from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.

If you experience any problems with your product, including missing parts, damaged components, or operational concerns, please do not hesitate to contact VECELO customer service. Our team is dedicated to ensuring your satisfaction and will assist you with free replacement parts or a brand new item if necessary.

For support, please refer to the contact information provided on your purchase receipt or the VECELO official website.