Introduction
The Britax Boulevard Clicktight Convertible Car Seat is designed to provide safety and comfort for your child as they grow from infancy through toddlerhood. This 2-in-1 car seat transitions seamlessly from rear-facing to forward-facing mode, accommodating children from 5 to 65 pounds. Featuring the innovative ClickTight installation system, it ensures a secure and confident installation every time. The SafeWash cover allows for easy machine washing and drying, simplifying maintenance. Built with a high-strength steel frame, SafeCell crumple zone, and V-shaped tether, this car seat offers advanced safety features for peace of mind.
Image: The Britax Boulevard Clicktight Convertible Car Seat in Green Contour, showcasing its design and features.
Setup and Installation
The Britax Boulevard Clicktight car seat features the ClickTight Installation System, designed for quick and secure installation using your vehicle's seat belt. This system eliminates the guesswork, ensuring a tight fit with minimal effort.
ClickTight Installation Steps:
- Open the ClickTight Door: Locate the ClickTight door on the front of the car seat. Press the release button and lift the door to open it, revealing the seat belt path.
- Route the Seat Belt: For forward-facing installation, route the vehicle's lap and shoulder belt through the designated forward-facing belt path. For rear-facing installation, route the lap belt through the rear-facing belt path. Ensure the belt is not twisted.
- Buckle the Seat Belt: Buckle the vehicle's seat belt.
- Close the ClickTight Door: Firmly press the ClickTight door closed until it clicks. The system automatically tensions the seat belt, securing the car seat tightly to your vehicle.
- Check for Tightness: Grasp the car seat at the belt path and attempt to move it side-to-side and front-to-back. It should not move more than one inch in any direction.
Image: A close-up view demonstrating the ClickTight installation process, highlighting the easy access to seat belt paths for confident installation.
Operating the Car Seat
The Britax Boulevard Clicktight car seat is designed to adapt to your child's growth, offering both rear-facing and forward-facing modes.
Child Weight and Height Limits:
- Rear-Facing: 5 to 40 pounds, and child's head is at least 1 inch below the top of the headrest.
- Forward-Facing: 20 to 65 pounds, and child is at least 1 year old.
Image: Visual representation of the car seat adapting for infant & toddler (5-40 lbs) and preschool (20-65 lbs) stages, illustrating its 2-in-1 convertible functionality.
Harness and Headrest Adjustment:
The car seat features a quick-adjust headrest and harness system that moves together, allowing you to easily achieve the perfect fit for your growing child without rethreading the harness. There are 14 positions available for optimal adjustment.
Image: A close-up of the car seat's headrest and harness, indicating the 14 adjustable positions for a quick and perfect fit as your child grows.
Recline Positions:
The car seat offers 7 recline positions to ensure optimal comfort and proper angle for your child, whether rear-facing or forward-facing. An easy-read level indicator assists in achieving the correct recline angle for safe installation.
Image: A happy child seated comfortably in the Britax Boulevard Clicktight car seat, demonstrating proper harness and recline usage.
Maintenance
Keeping your Britax Boulevard Clicktight car seat clean is simple with its SafeWash cover.
Cleaning Instructions:
- Fabric Cover: The car seat cover is safe to machine wash and dry. Refer to the care label on the cover for specific washing and drying instructions. Avoid using bleach or harsh detergents.
- Harness Straps: Wipe harness straps with a damp cloth. Do not machine wash or submerge harness straps in water, as this can weaken the webbing.
- Buckle and LATCH Connectors: Clean the buckle and LATCH connectors with a damp cloth. Do not lubricate.
- Plastic and Metal Parts: Wipe plastic and metal parts with a damp cloth and mild soap.
Image: A woman placing the removable car seat cover into a washing machine, illustrating the ease of cleaning with its machine-washable design.
The car seat features naturally flame-retardant fabrics with no added FR chemicals, ensuring safety without compromising on material integrity.
Image: The Britax car seat highlighting its naturally flame-retardant fabrics, emphasizing safety without added chemicals.
Troubleshooting
- Car Seat Feels Loose After Installation: Ensure the ClickTight door is fully closed and latched. Re-open the door, pull the seat belt tight, and then firmly close the door again. The car seat should not move more than one inch at the belt path.
- Harness is Difficult to Adjust: Check for any twists in the harness straps. Ensure the harness adjuster strap is pulled straight out from the car seat. If the issue persists, consult the full instruction manual for detailed guidance.
- Child's Head is Not Properly Supported: Adjust the headrest to ensure it is positioned correctly for your child's height. The top of the child's head should be at least 1 inch below the top of the headrest when rear-facing. When forward-facing, the harness straps should be at or above the child's shoulders.
- Difficulty with Recline Adjustment: The recline mechanism is located at the front of the seat. Ensure the car seat is not installed when attempting to adjust the recline, especially for rear-facing positions, as access may be limited. Adjust the recline before final installation.
Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 24 x 18.5 x 23.5 inches |
| Item Model Number | E1C832Z |
| Minimum Weight Recommendation | 5 Pounds |
| Maximum Weight Recommendation | 65 Pounds |
| Maximum Height Recommendation | 49 Inches |
| Material Type | Alloy Steel, 100% Polyester |
| Care Instructions | Machine wash and dry (cover) |
| Style | Boulevard |
| Number of Reclining Positions | 14 |
| Orientation | Rear Facing, Forward Facing |
| Harness Type | 5-Point |
| Item Weight | 29.5 pounds |
| Installation Type | Clicktight, Seat Belt |
Image: An annotated diagram of the car seat, pointing out key safety features such as Side Impact Protection, Steel Reinforced Frame, 7-Position Recline, and Easy-Read Level Indicator.
Warranty and Support
Britax car seats are designed for durability and safety. While specific warranty details are typically provided with your product registration or on the manufacturer's official website, Britax generally offers a limited warranty covering defects in materials and workmanship. The car seat has a lifespan of 10 years from the date of manufacture.
For customer support, product registration, or to view the full warranty policy, please visit the official Britax website or contact their customer service department. Always retain your proof of purchase for warranty claims.
For additional information and resources, you may visit the Britax Store on Amazon.
