Poraxy 4-Pack Wooden 3D Dinosaur STEM Puzzle Kit

Introduction

This manual provides instructions for the assembly, operation, and care of your Poraxy 4-Pack Wooden 3D Dinosaur STEM Puzzle Kit. This kit includes four distinct dinosaur models: Tyrannosaurus Rex, Brachiosaurus, Triceratops, and Pterosaur, designed to engage users in educational building projects and foster creativity and problem-solving skills.

Safety Information

• Adult supervision is recommended during assembly, especially for younger children.
• Keep small parts away from children under 3 years old to prevent choking hazards.
• Do not modify the electrical components or wiring.
• Ensure batteries are inserted with correct polarity and disposed of responsibly.

Package Contents

The Poraxy 4-Pack Wooden 3D Dinosaur STEM Puzzle Kit includes:

• 1 x Brachiosaurus wooden puzzle set
• 1 x Tyrannosaurus Rex wooden puzzle set
• 1 x Triceratops wooden puzzle set
• 1 x Pterosaur wooden puzzle set
• 4 x Mini Screwdrivers
• 4 x Detailed Instruction Manuals (one for each dinosaur)

Figure 1: Kit contents including gift box, individual dinosaur kits, and instruction manuals.

Figure 2: Close-up of laser-cut wooden pieces and a summary of package inclusions.

Setup and Assembly

Each dinosaur model comes with its own detailed instruction manual. Follow the step-by-step guides provided for each specific dinosaur. The wooden pieces are precisely laser pre-cut for easy removal and assembly without the need for glue.

General Assembly Steps:

1. Unpack Components: Carefully remove all wooden pieces and electronic components from their packaging.
2. Identify Parts: Refer to the included diagram in each dinosaur's manual to identify all parts.
3. Assemble Wooden Structure: Connect the wooden pieces according to the numbered steps in the manual. Apply gentle, even pressure.
4. Install Electronic Components: Integrate the motor, battery box, and wired controller as instructed. Ensure all connections are secure.
5. Insert Batteries (Pterosaur only): The Pterosaur model requires 2 "AA" batteries (not included) for its flapping wing mechanism. Insert them into the designated battery compartment, observing correct polarity.
6. Final Checks: Before operation, ensure all parts are securely attached and there are no loose connections.

Figure 3: Components for assembly, including wooden pieces, controller, and battery box.

Figure 4: Visual representation of the assembly process from parts to a functional dinosaur.

Figure 5: Children assembling the educational dinosaur projects.

Operating Instructions

Wired Controller Dinosaurs (Tyrannosaurus Rex, Brachiosaurus, Triceratops):

These dinosaur models are operated using a wired controller. Connect the controller to the dinosaur's motor. Use the buttons on the controller to make the dinosaur move forward or backward.

Figure 6: Operating a dinosaur with the wired controller for movement.

Pterosaur (Flapping Wings):

The Pterosaur model features flapping wings. Ensure 2 "AA" batteries are correctly installed in its battery compartment. Activate the mechanism to observe the wings in motion.

Figure 7: The Pterosaur model with its flapping wing mechanism.

Maintenance

• Cleaning: Wipe the wooden parts with a dry, soft cloth. Avoid using water or cleaning solutions, as they may damage the wood or electronic components.
• Storage: Store the assembled dinosaurs and any unbuilt kits in a dry place, away from direct sunlight and extreme temperatures.
• Battery Replacement: For the Pterosaur, replace "AA" batteries when movement becomes sluggish. Always use new batteries and dispose of old ones responsibly.

Troubleshooting

Dinosaur Not Moving:

• Check Battery Installation: Ensure batteries (for Pterosaur) are correctly inserted with the proper polarity and are not depleted.
• Verify Connections: Confirm all wired connections between the motor, battery box, and controller are secure and properly seated.
• Inspect Wooden Parts: Ensure no wooden parts are obstructing the movement of gears or joints.
• Review Assembly Steps: Double-check the assembly manual for any missed or incorrect steps.

Parts Not Fitting:

• Gentle Pressure: Apply gentle, even pressure when assembling. Do not force parts, as this may cause damage.
• Orientation: Ensure parts are oriented correctly according to the diagrams in the manual.

Specifications

Warranty Information

Please refer to the product packaging or contact Poraxy customer support for specific warranty details. General return policies may apply as per the retailer's terms and conditions.

Customer Support

For further assistance, questions, or to report any issues, please contact Poraxy customer support through the retailer's platform or visit the official Poraxy store:

Poraxy Amazon Store