SANODESK Adjustable Overbed Bedside Table User Manual

Introduction

This manual provides essential information for the safe and efficient use of your SANODESK Adjustable Overbed Bedside Table. Please read these instructions carefully before assembly and operation, and retain them for future reference.

Safety Information

WARNING:

• Ensure the desk is stable when adjusting height.
• Do not exceed the maximum weight recommendation of 15.4 pounds (approx. 7 kg) to avoid tipping or structural failure. Refer to the product label for exact maximum load.
• Handle with care to prevent injury.
• This table is designed for indoor use only.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Tabletop (Engineered Wood)
• Main Support Column (Stainless Steel)
• Base Frame (Engineered Wood)
• Hidden Casters (pre-installed or separate, check packaging)
• Pneumatic Lift System Components
• Cup Holder
• Assembly Hardware (screws, etc.)
• Tools for Assembly (e.g., screwdriver)

Setup and Assembly

Assembly is required for this product. A screwdriver is recommended for assembly. Follow the instructions provided in the product packaging for detailed steps.

1. Unpack all components and lay them out on a clean, flat surface.
2. Attach the main support column to the base frame using the provided hardware. Ensure all screws are tightened securely.
3. Mount the tabletop onto the main support column. Pay attention to the orientation for the pneumatic lift lever and cup holder attachment point.
4. Attach the cup holder to the designated slot on the tabletop.
5. Confirm all connections are secure and the table is stable before use.

Image: Product dimensions and maximum load capacity.

Operating Instructions

Height Adjustment

The table features a gas spring pneumatic lift system for effortless height adjustments.

• To raise the table: Locate the pneumatic hand control lever (often on the underside of the tabletop). Lift the lever and gently guide the tabletop upwards to your desired height. Release the lever to lock it in place.
• To lower the table: Locate the pneumatic hand control lever. Lift the lever and apply gentle downward pressure on the tabletop. Guide it to your desired height and release the lever to lock.

Image: Pneumatic hand control for seamless height adjustments.

Mobility and Placement

The table features hidden casters for easy movement and a low-profile base to fit under various furniture.

• Gently push or pull the table to move it. The hidden casters allow for smooth maneuverability on hard surfaces.
• The low-profile base (1.2" clearance) is designed to slide under beds, sofas, or armchairs, bringing the tabletop closer to you.

Image: Hidden casters and low base for easy placement under furniture.

Using the Cup Holder

The integrated cup holder provides a secure spot for your beverage, preventing spills.

• Place your cup or mug securely into the built-in coaster.
• Ensure the cup holder is properly attached and stable before placing drinks.

Image: Integrated cup holder for secure beverage placement.

Maintenance

• Cleaning: Wipe the tabletop and frame with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Storage: Store the table in a dry, indoor environment when not in use.

Troubleshooting

Table is unstable or wobbly:

Ensure all assembly screws are securely tightened. Check that the table is placed on a flat, even surface.

Difficulty adjusting height:

Ensure the pneumatic lift lever is fully engaged when attempting to adjust. If the table is heavily loaded, remove items before adjusting height. Do not exceed the maximum weight capacity.

Table does not roll smoothly:

The hidden casters are designed for smooth surfaces. Movement on thick carpets or uneven flooring may be difficult. Ensure casters are free from debris.

Specifications

Warranty and Support

For warranty information, please refer to the documentation included with your product or visit the official SANODESK website. If you require assistance with assembly, operation, or troubleshooting, please contact SANODESK customer support.

You can visit the SANODESK Store on Amazon for more information and support resources.