Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5 Inch Waterproof Marine Bluetooth Ceiling Speakers. Designed for versatile use in marine environments, recreational vehicles, and outdoor settings, these speakers offer robust performance and wireless audio streaming. Please read this manual thoroughly before use to ensure proper setup and optimal performance.
Package Contents
Verify that all items listed below are included in your package:
- A pair of HMS-6005 speakers (2 Pcs)
- Bluetooth Amplifier Box (1 Pc)
- 3A 12V Power Adapter (1 Pc)
- DC 12V Power Wires (1 Pc)
- Speaker Wires (2 Pcs)
- Mounting Screws (8 Pcs)
- Product Manual (1 Pc)
Image: All components included in the Herdio 6.5 Inch Marine Bluetooth Speaker package.
Product Specifications
| Feature | Specification |
|---|---|
| Model Name | HMS-6055WBT |
| Speaker Size | 6.5 Inches |
| Speaker Type | 2-Way, Outdoor, Marine |
| Maximum Output Power | 120 Watts (60W per speaker) |
| Impedance | 4 Ohm |
| Wireless Technology | Bluetooth |
| Bluetooth Range | Up to 33 feet (10 meters) |
| Water Resistance Level | Marine Grade Waterproof (IP66) |
| Input Voltage | 12 Volts (DC) |
| Product Dimensions (each speaker) | 7"D x 7"W x 2.5"H |
| Cut-out Diameter | 5.31 inches (135mm) |
| Mounting Depth | 2.48 inches (63mm) |
Image: Product packaging with detailed specifications.
Installation Guide
Follow these steps for proper installation of your Herdio marine speakers.
1. Planning and Preparation
- Choose a suitable mounting location that is flat and provides sufficient depth for the speaker.
- Ensure the location is clear of any wiring, pipes, or structural elements that could be damaged during installation.
- Mark the cut-out area using the provided template or the specified dimensions: Cut-out Diameter: 5.31 inches (135mm).
- Verify the Mounting Depth: 2.48 inches (63mm) is available.
Image: Speaker dimensions for accurate installation.
2. Wiring and Mounting
- Carefully cut the marked holes in your chosen mounting surface.
- Insert the speakers into the cut-out holes.
- Secure the speakers using the provided screws. Ensure they are tightened firmly but do not overtighten.
- Connect the speaker cables to the terminals on the back of each speaker. Ensure correct polarity (red for positive, black for negative).
- Connect the other end of the speaker cables to the Bluetooth amplifier box. Match the left (SPK L) and right (SPK R) channels, maintaining correct polarity.
- Connect the DC 12V power cable to the 'Power Jack' input on the amplifier box.
- Plug the 3A 12V power adapter into a suitable power source and connect it to the DC 12V power cable.
Video: Detailed unboxing, wiring, and Bluetooth pairing instructions for the Herdio 6.5 Inch Marine & Ceiling Bluetooth Speakers.
Image: Herdio speakers installed on a boat, showcasing flush-mount design.
Operating Instructions
1. Powering On
Once the speakers and amplifier are correctly wired and connected to the power supply, the amplifier's blue indicator light will begin to blink, indicating it is in pairing mode.
2. Bluetooth Pairing
- Ensure your mobile device (smartphone, tablet, etc.) has Bluetooth enabled.
- Search for available Bluetooth devices. The amplifier will appear as "Herdio".
- Select "Herdio" to pair. Once connected, the amplifier's blue indicator light will become constant (no longer blinking).
3. Audio Playback
After successful pairing, you can now play audio from your connected device through the Herdio speakers. Adjust the volume on your device for desired sound output.
Image: Herdio Bluetooth amplifier box with labeled connections.
Maintenance and Care
To ensure the longevity and optimal performance of your waterproof marine speakers, follow these maintenance guidelines:
- Cleaning: Regularly wipe down the speaker grilles and surfaces with a soft, damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly with fresh water. Avoid abrasive cleaners or solvents.
- Water Exposure: While these speakers are marine-grade waterproof, prolonged submersion is not recommended. After exposure to saltwater, rinse the speakers with fresh water to prevent salt buildup and corrosion.
- Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
- Storage: If storing the speakers for an extended period, especially in harsh conditions, ensure they are clean and dry.
Image: Herdio marine speaker demonstrating its waterproof capabilities.
Troubleshooting
If you encounter issues with your Herdio speakers, refer to the following common problems and solutions:
- No Power:
- Ensure the power adapter is securely plugged into a working outlet and the amplifier.
- Check the DC 12V power cable connection to the amplifier.
- No Sound:
- Verify that the speakers are correctly wired to the amplifier, paying attention to polarity.
- Confirm that your Bluetooth device is successfully paired and audio is playing.
- Check the volume levels on both your connected device and the amplifier (if applicable).
- Bluetooth Pairing Issues:
- Ensure the amplifier's blue light is blinking, indicating it's in pairing mode.
- Move your device closer to the amplifier (within 33 feet).
- Turn off and on the Bluetooth on your device, then try pairing again.
- If previously paired, try 'forgetting' the device on your phone and re-pairing.
- Distorted Sound:
- Reduce the volume on your connected device or the amplifier.
- Check speaker wire connections for any loose or frayed wires.
Warranty Information
Your Herdio 6.5 Inch Waterproof Marine Bluetooth Ceiling Speakers come with a Limited Warranty. Please refer to the warranty card included in your package or contact Herdio customer support for specific terms and conditions.
Contact Support
For further assistance, technical support, or warranty claims, please contact Herdio customer service through the official website or the contact information provided in your product manual.
