Unicorn On Tour Portable Dartboard System with Eclipse Pro Dartboard User Manual

Introduction

This manual provides instructions for the setup, operation, and maintenance of the Unicorn On Tour Portable Dartboard System, which includes the Unicorn Eclipse Pro Dartboard. This system is designed for convenient transport and setup, allowing for dart play in various locations.

Product Components

The Unicorn On Tour Portable Dartboard System includes the following items:

• Unicorn Eclipse Pro Dartboard
• Unicorn OcheMate (for precise setup)
• Unicorn short mat Oche
• Dartboard mounting system with adjustable door fixing
• Specially designed convenient carry bag

Image: All components of the Unicorn On Tour Portable Dartboard System, including the Eclipse Pro dartboard, OcheMate, short mat Oche, and mounting system, laid out for inspection.

Setup Instructions

1. Unpack Components: Carefully remove all items from the carry bag.
2. Assemble Mounting System: The dartboard mounting system is designed for door fixing. Attach the dartboard to the mounting bracket securely. Ensure all fasteners are tightened to prevent movement during play.
3. Position on Door: Hang the assembled dartboard and mounting system over a sturdy door. Adjust the straps to ensure the dartboard is level and at the correct height. The center of the bullseye should be 5 feet 8 inches (1.73 meters) from the floor.
4. Set Oche Distance: Unroll the Unicorn short mat Oche. Use the Unicorn OcheMate to precisely measure the throwing distance. For steel-tip darts, the standard throwing distance (oche) is 7 feet 9 ¼ inches (2.37 meters) from the face of the dartboard. Place the short mat Oche at this measured distance.
5. Safety Warning: Ensure the external safety warning notice is visible to alert others that a dartboard is in use. Clear the area around the dartboard of any obstructions or fragile items.

Image: The Unicorn Eclipse Pro Dartboard securely mounted on a door using the adjustable door fixing system, ready for play.

Operating Instructions

Once the dartboard system is set up, ensure the playing area is well-lit and clear of any people or obstacles. Always throw darts from behind the oche line. Retrieve darts carefully after each throw. For optimal dartboard longevity, rotate the dartboard periodically to distribute wear evenly across different scoring segments.

Maintenance

• Dartboard Care: Rotate the dartboard regularly (e.g., weekly with frequent use) to ensure even wear of the sisal fibers. This helps extend the life of the dartboard.
• Cleaning: Wipe the dartboard surface with a dry, soft cloth to remove dust. Do not use water or cleaning solutions, as this can damage the sisal fibers. Clean the short mat Oche and carry bag with a damp cloth as needed.
• Storage: When not in use, disassemble the system and store all components in the provided carry bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Image: A person demonstrating the portability of the Unicorn On Tour system, carrying the dartboard and accessories in its dedicated shoulder bag.

Troubleshooting

• Dartboard Not Level: Adjust the straps on the door mounting system until the dartboard hangs perfectly level.
• Darts Not Sticking: Ensure darts have sharp points. If the dartboard is old or heavily used in one area, rotate it to a less worn section.
• System Instability: Verify that the door mounting system is securely fastened to the door and that the door itself is stable. Avoid using on flimsy or unsecured doors.

Specifications

Warranty and Support

For specific warranty information regarding your Unicorn On Tour Portable Dartboard System, please refer to the documentation provided at the time of purchase or visit the official Unicorn website. For product support or inquiries, contact Unicorn customer service through their official channels.