Introduction
Thank you for purchasing the Angrox CT-90348 Universal Remote Control. This remote is designed for seamless compatibility with various Toshiba REGZA LCD TV series, including RE2, RE1, RE1S, R1, HE1, H1S, and H1. It offers a user-friendly experience with pre-set functions, eliminating the need for complex setup procedures. Please read this manual carefully to ensure proper use and to maximize your viewing experience.
Image: The Angrox CT-90348 remote control shown alongside a Toshiba REGZA television, highlighting its compatibility and ease of use. Key features like pre-set functions, recording, and long-distance transmission are indicated.
Setup
Battery Installation
The Angrox CT-90348 remote control requires two AAA alkaline batteries (sold separately). No programming or pairing is needed; simply insert the batteries, and the remote is ready for use with compatible Toshiba REGZA TVs.
- Open the battery compartment cover on the back of the remote control.
- Insert two AAA alkaline batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
Important Note:
- Do not use damaged batteries.
- Ensure battery terminals are clean and free from oxidation.
- For optimal performance, alkaline batteries are recommended.
- If the remote does not respond after battery installation, gently adjust the positive terminal spring in the battery box as it may be slightly recessed.
Image: A detailed diagram illustrating how to install two AAA batteries into the remote control. It also shows the remote's dimensions (205mm length, 49mm width) and advises on battery type and proper terminal contact.
Initial Use
Once batteries are installed, the remote control is ready to operate your Toshiba REGZA TV. Point the remote directly at the TV's infrared receiver and press the desired function button.
Image: A user operating the Angrox CT-90348 remote control with a Toshiba REGZA TV. The image emphasizes the 'no setup required' feature, allowing immediate use after battery insertion.
Operating Instructions
The Angrox CT-90348 remote control features an ergonomic design with large, easy-to-press buttons and high-contrast key lettering for improved visibility and comfortable operation.
Image: Multiple close-up views of the remote control, showcasing its comfortable grip, large buttons, and clear labeling. Details include the high-contrast black and white keys and the functionality for digital broadcast channel selection (Terrestrial, BS, CS).
Button Functions Guide
Refer to the diagram below for a comprehensive guide to each button's function.
Image: A full layout of the Angrox CT-90348 remote control, with arrows and text indicating the purpose of each button, from power and channel selection to menu navigation and recording functions.
- Power Button: Turns the TV on or off.
- Input Selection: Switches between video inputs (e.g., HDMI, AV).
- Number Buttons (0-12): Directly select channels.
- Channel Up/Down: Changes channels sequentially.
- Volume Up/Down: Adjusts the TV volume.
- Mute: Mutes or unmutes the TV sound.
- Program Guide: Displays the electronic program guide.
- Menu: Accesses the TV's main menu.
- Navigation Buttons (Up/Down/Left/Right): Navigate through menus and options.
- Enter/OK Button: Confirms selections.
- Return/Back: Returns to the previous screen or menu.
- Exit: Exits the current menu or function.
- Color Buttons (Red, Green, Yellow, Blue): Used for specific functions within menus or interactive services, as indicated on the TV screen.
- Playback Controls (Play, Pause, Stop, Fast Forward, Rewind): Controls media playback for recorded content or connected devices.
- Recording Button: Initiates recording of the current program.
- Data Button: Accesses data broadcasting services.
- Subtitle Button: Toggles subtitles on/off.
- Audio Button: Changes audio tracks or modes.
- Screen Size Button: Adjusts the screen display size.
Maintenance
Cleaning the Remote Control
To maintain the remote control's appearance and functionality, clean it regularly.
- Wipe the remote control with a soft, dry cloth.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner.
- Do not use harsh chemicals, solvents, or abrasive cleaning pads, as these can damage the remote's surface or internal components.
Battery Replacement
Replace the batteries when the remote control's response becomes sluggish or stops working. Follow the battery installation steps outlined in the Setup section.
- Always replace both batteries at the same time.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the remote control will not be used for an extended period to prevent leakage.
Troubleshooting
If you experience issues with your Angrox CT-90348 remote control, please refer to the following common problems and solutions:
Remote Control Not Working
- Is the TV powered on? Ensure your television is turned on and functioning correctly.
- Are the batteries depleted or incorrectly inserted? Check if the AAA batteries are fresh and inserted with the correct positive (+) and negative (-) polarities.
- Is there an obstruction? Ensure there are no objects blocking the line of sight between the remote control and the TV's infrared receiver.
- Is direct sunlight or strong lighting affecting the receiver? Strong light sources can interfere with the infrared signal. Try changing the direction of the lighting or operating the remote in a different environment.
- Are fluorescent lights nearby? Some fluorescent lights can emit infrared noise that interferes with remote control signals.
- Are the battery terminals oxidized? Check the battery terminals inside the remote for any faint black oxidation. Clean them if necessary.
- Is the room temperature extremely low? Extreme cold can affect battery performance.
- Does the remote control number match the TV? While this remote is pre-set, in rare cases or with specific TV models, if your TV displays a message like "Remote control number setting is different," you may need to ensure the remote is compatible with your specific TV model or consult your TV's manual for remote control settings.
Image: A visual representation of potential issues that might cause a remote control to malfunction, such as battery problems or signal interference.
Specifications
| Brand | Angrox |
| Model Number | CT-90348 |
| Color | Black |
| Connectivity Technology | Infrared (IR) |
| Controller Type | Button Control |
| Maximum Range | 8 meters |
| Battery Type | AAA Alkaline (x2, not included) |
| Item Dimensions (L x W x H) | 20.5 cm x 4.9 cm x 2.5 cm |
| Feature | Universal, Pre-set for Toshiba REGZA TVs |
Support
For any questions or issues not covered in this manual, please contact Angrox customer support through the platform where you purchased the product. Typically, you can find contact options by:
- Navigating to the product page and clicking on the seller name (Angrox) to find a "Contact Seller" or "Ask a question" option.
- Accessing your order history and selecting the option for "Problem with order" to contact customer service.
Warranty Information
Specific warranty details may vary by region and retailer. Please refer to the product packaging or the seller's terms and conditions at the time of purchase for comprehensive warranty information. For returns, refunds, or exchanges, please contact the seller directly through the purchase platform, as our products are typically handled by fulfillment services that facilitate quick processing.