Introduction
This manual provides instructions for the safe and efficient use of your saschedross 5V AC/DC Adapter. This adapter is specifically designed for charging the WORKPRO Model W023028A 3.6V 2000mAh Lithium-Ion battery, commonly found in cordless staple guns and electric staplers. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
To ensure safe operation and prevent damage, observe the following safety precautions:
- Over Voltage Protection (OVP): The adapter includes protection against excessive output voltage.
- Over Current Protection (OCP): The adapter is designed to protect against excessive output current.
- Short Circuit Protection (SCP): The adapter features protection against short circuits.
- Input Voltage: This adapter supports a wide input voltage range of 100-240VAC, 50/60Hz, making it suitable for worldwide use.
- Battery Lifespan: Rechargeable batteries have a limited lifespan, typically 1 to 3 years. If your device's battery is old or dead, it may not accept a charge. This is a battery issue, not a charger malfunction.
- Troubleshooting Charging Issues: If you suspect a charging problem, use a voltmeter to verify if the charger is supplying the correct voltage.
- Environmental Conditions: Do not expose the adapter to water, moisture, or extreme temperatures.
- Disassembly: Do not attempt to disassemble or modify the adapter. This can lead to electric shock or fire.
- Compatibility: Use this adapter only with compatible devices as specified.
- Ventilation: Ensure adequate ventilation around the adapter during use.
Package Contents
Verify that all items are present upon opening the package:
- 1 x saschedross 5V AC/DC Adapter

Figure 1: The saschedross 5V AC/DC Adapter with its integrated 6.5 ft power cable. This image shows the full length of the cable and the adapter unit.
Setup
Follow these steps to set up your adapter for charging:
- Connect to Device: Insert the output plug of the saschedross 5V AC/DC Adapter into the designated charging port of your WORKPRO Model W023028A device. Ensure a firm connection.
- Connect to Power Outlet: Plug the AC adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
Operating Instructions
Once connected, the adapter will automatically begin charging the compatible device.
- Charging Indication: Refer to your WORKPRO W023028A device's instruction manual for specific charging indicators (e.g., LED lights).
- Disconnection: Once the device's battery is fully charged, or if the device is not in use, disconnect the adapter from both the wall outlet and the device.

Figure 2: Illustrates the compact size of the adapter, making it easy to carry or store, as shown by a hand placing it into a pocket.
Maintenance
Proper maintenance ensures the longevity and performance of your adapter:
- Cleaning: Wipe the adapter with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use.
- Inspection: Periodically inspect the adapter's casing and cable for any signs of damage, such as cuts, fraying, or bent prongs. Discontinue use if damage is found.
Troubleshooting
If you encounter issues with charging, consider the following:
- Device Not Charging:
- Ensure the adapter is fully plugged into both the wall outlet and the WORKPRO device.
- Verify that the wall outlet is functional by testing it with another appliance.
- Check the condition of the WORKPRO device's battery. Old or dead batteries (typically beyond 1-3 years of use) may no longer accept a charge.
- If available, use a voltmeter to confirm if the adapter is outputting 5VDC.
- Adapter Overheating: Disconnect the adapter immediately. Ensure it is not covered and has adequate ventilation. If overheating persists, discontinue use.
Specifications
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 5VDC |
| Protection Features | Over Voltage Protection (OVP), Over Current Protection (OCP), Short Circuit Protection (SCP) |
| Power Source | Corded Electric |
| Manufacturer | Shenzhen Waweis Technology Co., Ltd |
| Compatible Device | WORKPRO Model W023028A (3.6V 2000mAh Lithium-Ion Battery) |

Figure 3: Various views of the adapter illustrating its dimensions: approximately 2.7 inches in length, 1.2 inches in width, and 1.6 inches in depth.
Warranty and Support
For warranty information and customer support, please refer to the purchase documentation or contact the seller directly. The manufacturer, Shenzhen Waweis Technology Co., Ltd, provides the product, and support is typically handled by the brand or retailer.