Product Overview
The TENSSENX 1:18 Scale All Terrain RC Car is a high-speed, 4-wheel drive remote control monster truck designed for enthusiasts of all ages. It features a powerful brushed RC 380 motor, capable of reaching speeds up to 40+ km/h. Its robust design and independent suspension allow it to conquer various terrains, providing an exciting off-road experience.
This image displays the TENSSENX 1:18 Scale RC Monster Truck in green, alongside its remote control, two rechargeable batteries, a USB charger, and a bag of spare parts. The truck features large, treaded tires and a vibrant green and black camouflage body.
Key Features
- High Speed Performance: Equipped with a fast brushed RC 380 motor, achieving speeds up to 40+ km/h.
- 4-Wheel Drive System: Provides superior traction and control on diverse terrains.
- All-Terrain Capability: Larger tires with carefully designed treads and metal sheet hubs offer strong grip for grass, sand, rocks, and puddles.
- Extended Playtime: Includes two 7.4V rechargeable batteries for up to 42 minutes of continuous operation.
- Durable Construction: Features a flexible PVC truck body and a quality PA chassis designed for collision resistance.
- Hobby-Grade Design: Incorporates independent suspension, durable driveshaft, solid gear differential, and classic ball bearings for enhanced performance and longevity.
- 2.4GHz Full-Function Remote Control: Offers proportional control for throttle and speed, with a range of up to 300 feet.
This image provides a detailed view of the TENSSENX RC Monster Truck, highlighting its key features such as 40+ minute run time, 40+ KPH high speed, 1:18 scale, Ready-To-Run (RTR) status, 4WD system, powerful brushed motor, electronic speed control, 45-degree climbing ability, and high responsive servo. The truck is shown in action, kicking up dirt.
Safety Information
Please read and understand all safety precautions before operating the RC truck. Failure to do so may result in injury or damage to the product.
- Keep hands, hair, and loose clothing away from moving parts.
- Do not operate in public streets, near people, or in areas with obstacles.
- Avoid operating in wet conditions or near water to prevent electrical damage.
- Always use the provided charger and batteries. Do not attempt to charge non-rechargeable batteries.
- Supervise children during operation. Recommended age is 8-12 years.
- Store the product in a cool, dry place when not in use.
Setup Guide
1. Unboxing and Initial Inspection
Carefully remove all components from the packaging. Verify that all items listed in the "What's in the Box" section are present and undamaged.
This image illustrates the complete contents of the product box, including the 1:18 bashing monster truck, remote control, two Li-ion 1200mAh 7.4V batteries, a USB charger, body clips, and an instruction manual.
2. Battery Installation and Charging
- Locate the battery compartment on the underside of the RC truck.
- Carefully connect one of the provided 7.4V rechargeable batteries to the truck's battery connector.
- Secure the battery within the compartment.
- To charge the batteries, connect the USB charger to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- Connect the battery to the charger. The charger's indicator light will show charging status (refer to charger instructions for specific light indications).
- Once fully charged, disconnect the battery from the charger.
3. Remote Control Setup
The remote control requires 3 x AA batteries (not included).
- Open the battery compartment on the back of the remote control.
- Insert 3 x AA batteries, ensuring correct polarity.
- Close the battery compartment.
- Turn on the remote control using the power switch. The power indicator light will illuminate.
This image provides a detailed view of the remote control, labeling its key components: Antenna Assembly, Power Indicator, Throttle Trim (for low speed to high speed adjustment), 2.4GHz (Stable signal transmission), Turn Left/Turn Right wheel, Steering Trim, Trigger, and Remote Control Power Switch.
Operating Instructions
1. Pairing the Remote Control and Truck
- Ensure both the RC truck and the remote control are powered off.
- Place the RC truck on a flat surface.
- Turn on the RC truck. The indicator light on the truck will blink.
- Turn on the remote control. The indicator light on the remote will blink.
- Wait a few seconds for the lights on both devices to become solid, indicating successful pairing.
2. Driving the RC Truck
- Forward/Backward: Pull the trigger towards you to move forward. Push the trigger away from you to move backward (brake/reverse).
- Steering: Rotate the steering wheel left or right to turn the truck.
- Throttle Trim: Use the "TH.TRIM" dial on the remote to adjust the throttle sensitivity, allowing for finer control at different speeds.
- Steering Trim: Use the "ST.TRIM" dial to fine-tune the steering if the truck pulls to one side when the steering wheel is centered.
This composite image shows the TENSSENX RC Truck navigating diverse terrains, including rocky hills, sandy dunes, and even flipping over, highlighting its "Explore Anywhere" and "Challenge Yourself" capabilities.
Maintenance
- Cleaning: After each use, especially in dusty or dirty conditions, clean the truck with a soft brush or cloth. Avoid using water directly on electronic components.
- Battery Care: Always fully charge batteries before storage and recharge them every 2-3 months if not used regularly to maintain battery health.
- Inspection: Regularly inspect tires, suspension, and other moving parts for wear or damage. Replace worn parts using the provided spares or purchasing new ones.
- Lubrication: Periodically apply a small amount of silicone grease to moving parts like gears and bearings to ensure smooth operation and reduce wear.
This image provides an exploded view of the RC truck, showcasing its key components: Environmental PVC Car Shell, Metal Sheet Rubber Tires, Aluminum Shocks Absorber, Strong Differential Mechanism, and Long Lasting Powerful Motor. This highlights the robust engineering for durability and performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Truck does not respond to remote. | Low battery in truck or remote; Not paired correctly. | Charge/replace batteries; Re-pair truck and remote. |
| Truck runs slowly or inconsistently. | Low battery in truck; Obstruction in drivetrain; Worn gears. | Charge battery; Check for debris; Inspect and replace gears if necessary. |
| Steering is off-center. | Steering trim needs adjustment. | Adjust "ST.TRIM" dial on remote control. |
| Unusual noise from truck. | Debris in gears; Damaged motor or drivetrain components. | Clean gears; Inspect and replace damaged parts. |
Specifications
- Scale: 1:18
- Drive System: 4WD
- Motor: Brushed RC 380
- Top Speed: 40+ KM/H
- Control Frequency: 2.4GHz
- Control Range: Up to 300 feet
- Batteries: 2 x 7.4V 1200mAh Li-ion (included)
- Run Time: Approximately 42 minutes per battery
- Chassis Material: PA (Polyamide)
- Body Material: Flexible PVC
- Recommended Age: 8 - 12 years
- Item Weight: 2 pounds
- Package Dimensions: 10.28 x 7.99 x 5.67 inches
Warranty and Support
For warranty information, technical support, or replacement parts, please contact TENSSENX customer service directly.
- Manufacturer: TENSSENX
- Customer Service Contact: Refer to the contact information provided in the original product packaging or on the official TENSSENX website.
- Online Support: Visit the TENSSENX Store on Amazon for additional product information and support resources.
