1. Introduction
This manual provides essential instructions for the safe and efficient use of your RICOH fi-8170 Workgroup Scanner. The fi-8170 is a high-speed, duplex document scanner designed for workgroup environments, featuring USB 3.2 and Gigabit Ethernet connectivity. It is equipped with an Automatic Document Feeder (ADF) and supports a manual feed mode for various document types.
Key Features:
- Automatic Document Feeder (ADF) / Manual Feed Mode: Facilitates scanning of various document types, including thicker materials.
- Duplex Scanning: Scans both sides of a document simultaneously, enhancing efficiency.
- Versatile Document Handling: Supports sizes such as A4, A5, A6, B5, B6, business cards, postcards, letter, legal, and personalized sizes.
- Passport Scanning: Capable of scanning passports compliant with ISO/IEC 7810 ID-3, up to 7 mm thick when unfolded.
- High Speed: Achieves scanning speeds of 70 pages per minute (ppm) / 140 images per minute (ipm).
- Connectivity: Features USB 3.2 and Gigabit Ethernet for flexible integration into your network.

Figure 1: Front view of the RICOH fi-8170 Workgroup Scanner with the document feeder open.
2. Setup
2.1 Unpacking and Placement
- Carefully remove the scanner and all accessories from the packaging.
- Place the scanner on a stable, flat surface with adequate space for document feeding and output.
- Remove all protective tapes and packing materials from the scanner.
2.2 Connecting the Scanner
- Connect the power adapter to the scanner and then to a power outlet.
- Connect the scanner to your computer using the provided USB 3.2 cable, or connect it to your network via an Ethernet cable for network scanning.
2.3 Software Installation
- Insert the installation CD/DVD (if provided) into your computer's optical drive, or download the latest drivers and software from the official RICOH support website.
- Follow the on-screen instructions to install the scanner drivers and any bundled scanning software.
- Restart your computer if prompted.
3. Operating Instructions
3.1 General Document Scanning (ADF)
- Ensure the scanner is powered on and connected to your computer or network.
- Adjust the document guides in the Automatic Document Feeder (ADF) to match the width of your documents.
- Load your documents face-down into the ADF. The scanner can hold up to 100 sheets.
- Open your scanning software on your computer.
- Select your desired scanning profile (e.g., color, grayscale, resolution, destination).
- Press the "Scan/Enter" button on the scanner or initiate the scan from the software.
- The scanner will automatically feed and scan the documents.

Figure 2: Side view of the RICOH fi-8170 scanner with documents loaded in the Automatic Document Feeder.
3.2 Scanning Thick Documents (Manual Feed Mode)
The fi-8170 features a manual feed mode specifically designed for scanning thicker items such as plastic cards, card savers, top loaders, or passports. This mode adjusts the internal motor to accommodate the increased thickness.
- Ensure the scanner is powered on.
- Press the "Manual Feed" button on the scanner's control panel. This action opens the internal motor to allow for thicker documents.
- Carefully insert your thick document (e.g., a card in a top loader) into the manual feed slot. The scanner will detect the document.
- Press the "Scan/Enter" button to initiate the scan.
- For multiple thick documents, you can continuously feed them one after another. The scanner will process each item sequentially.

Figure 3: Front view of the RICOH fi-8170 scanner with the manual feed tray extended for thicker documents.
Note: Always ensure documents are properly aligned and free from obstructions before feeding to prevent jams or damage.
4. Maintenance
4.1 Cleaning the Scanner
Regular cleaning ensures optimal scanning performance and extends the life of your scanner.
- Exterior: Wipe the exterior with a soft, damp, lint-free cloth. Do not use abrasive cleaners or solvents.
- Feed Rollers: Clean the feed rollers periodically using a cleaning kit recommended by RICOH or a soft cloth dampened with isopropyl alcohol. This helps prevent paper jams and misfeeds.
- Glass Surfaces: Gently clean the glass scanning surfaces with a soft, lint-free cloth and a non-abrasive glass cleaner.
4.2 Consumables
Periodically inspect and replace consumables such as feed rollers and brake rollers as recommended by the manufacturer to maintain optimal performance. Refer to the scanner's software or the official RICOH website for information on replacement parts and procedures.
5. Troubleshooting
This section addresses common issues you might encounter with your RICOH fi-8170 scanner.
5.1 Common Issues and Solutions
- Scanner Not Detected:
- Ensure all cables (power, USB/Ethernet) are securely connected.
- Verify the scanner is powered on.
- Check if the correct drivers are installed. Reinstall if necessary.
- Try connecting to a different USB port or network cable.
- Paper Jams:
- Turn off the scanner and carefully open all access covers.
- Gently remove any jammed paper, pulling in the direction of the paper path.
- Ensure documents are free of staples, paper clips, or tears before feeding.
- Clean the feed rollers if they appear dirty or worn.
- Poor Scan Quality:
- Clean the glass scanning surfaces and rollers.
- Adjust scanning software settings (e.g., resolution, brightness, contrast).
- Ensure documents are loaded correctly and flat.
- Scanner Not Feeding Documents:
- Check if documents are loaded correctly and the paper guides are adjusted.
- Ensure the ADF is not overloaded.
- Clean or replace worn feed rollers.
For more detailed troubleshooting, refer to the comprehensive guide available on the official RICOH support website or contact customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Model Name | FI 8170 |
| Item Model Number | 12804624000 |
| Manufacturer | FUJITSU (RICOH is the brand) |
| Scanner Type | Document |
| Connectivity Technology | USB 3.2, Gigabit Ethernet |
| Resolution | 600 dpi |
| Color Depth | 24 bits |
| Standard Sheet Capacity | 100 sheets (ADF) |
| Optical Sensor Technology | CCD |
| Product Dimensions | 25"D x 22"W x 20"H |
| Item Weight | 12.1 pounds (5.5 Kilograms) |
| Minimum System Requirements | Windows 7 (and newer operating systems) |
7. Warranty & Support
For detailed information regarding the product warranty, including terms, conditions, and duration, please refer to the documentation included with your scanner or visit the official RICOH support website.
Important Note: Product warranty and service availability may vary by region. It is crucial to verify that your specific scanner model (identified by its part number) is intended for sale and service in your geographical region to ensure warranty coverage and access to technical support.
For technical assistance, driver downloads, and further support, please visit: RICOH Support Website.