1. Introduction
The McKesson Quintet AC Blood Glucose Test Strips are designed for use with the McKesson QUINTET AC Blood Glucose Monitoring System and QUINTET AC Blood Glucose Control Solution. These strips are intended for measuring glucose in fresh capillary whole blood samples.
They are suitable for self-testing at home and for multiple-patient use in professional healthcare settings, such as long-term care facilities and medical offices. The auto-coding feature ensures quick and accurate testing, aiding in the effective monitoring of diabetes.
Key Features:
- Accurate results and quick response time.
- Designed for use with McKesson QUINTET AC Blood Glucose Monitoring System.
- Features a unique glove-grip paddle for caregiver's convenience.
- Requires a minimal sample size of 1 µL.
- Auto-coding for simplified and precise testing.
- Single-use strips for hygiene and accuracy.
2. Product Components
Each package of McKesson Quintet AC Blood Glucose Test Strips contains the following:
An overview of the McKesson Quintet AC Blood Glucose Test Strips packaging, including the box, a sealed vial of strips, and a single test strip.
A close-up view of the McKesson Quintet AC Blood Glucose Test Strips vial, showing the label with product information and usage instructions.
A detailed view of a single McKesson Quintet AC Blood Glucose Test Strip, highlighting its design and the area for blood application.
3. Setup
Before using the test strips, ensure you have the McKesson QUINTET AC Blood Glucose Monitoring System and, if needed, the control solution. Always read the owner's manual for your blood glucose meter for complete instructions.
Upon opening a new vial of test strips, note the discard date. The strips should be used within 3 months of opening the vial. Do not use strips past their expiration date printed on the box and vial.
The back of the test strip box provides important information regarding in vitro diagnostic use, sample sources, and storage conditions.
4. Operating Instructions
Follow these general steps for blood glucose testing. Always refer to your McKesson QUINTET AC Blood Glucose Meter's owner's manual for specific instructions on meter operation.
- Prepare: Wash your hands thoroughly with soap and warm water. Dry them completely.
- Obtain Blood Sample: Use a lancing device to obtain a blood sample from your fingertip, palm, or forearm, as instructed by your healthcare professional and meter manual.
- Apply Blood to Strip: Gently touch the tip of the test strip to the blood sample. The strip will draw the blood into the reaction area. Ensure the blood sample is sufficient to fill the strip's confirmation window.
- Insert Strip into Meter: Insert the test strip into the McKesson QUINTET AC Blood Glucose Meter. The meter will automatically code and begin the test.
- Read Results: The blood glucose result will appear on the meter's display within a few seconds.
This video demonstrates the use of McKesson QUINTET AC Blood Glucose Test Strips with the monitoring system, showing the process of obtaining a blood sample and applying it to the strip.
A hand is shown holding a McKesson Quintet AC test strip, with a small blood sample visible on the strip's application area, ready for testing.
5. Maintenance and Storage
Proper handling and storage of your test strips are crucial for accurate results and product longevity.
- Always keep test strips in their original vial with the cap tightly sealed immediately after removing a strip.
- Never transfer strips from one vial to another.
- Never reuse strips; they are for single-use only. Discard used test strips properly after each test.
- Store test strips between temperatures of 39-86°F (4-30°C). Do not freeze.
- Avoid storing strips outside of the vial for extended periods.
- This product is not made with natural rubber latex.
A hand is shown carefully inserting a used test strip back into its vial, emphasizing the importance of proper disposal and re-capping the vial.
6. Troubleshooting
If you encounter issues during testing, consider the following common troubleshooting tips:
- Error Codes: Refer to your McKesson QUINTET AC Blood Glucose Meter's owner's manual for explanations of specific error codes and recommended actions.
- Insufficient Blood Sample: If the meter indicates an insufficient blood sample, discard the used strip and repeat the test with a new strip and a fresh blood sample. Ensure the blood drop is large enough to be fully absorbed by the strip.
- Expired or Damaged Strips: Check the expiration date on the vial and box. Do not use expired or visibly damaged strips. Ensure the vial cap was tightly sealed.
- Storage Conditions: Verify that the strips have been stored within the recommended temperature range and away from direct sunlight or extreme humidity.
- Control Solution Test: If you suspect inaccurate results, perform a control solution test as described in your meter's manual to verify the meter and strip functionality.
For persistent issues, contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 1.4 x 3.2 x 4.8 inches |
| Item Weight | 6.7 ounces |
| Manufacturer | McKesson Brand |
| ASIN | B09X6DK6KS |
| Item Model Number | 5059 |
| Date First Available | April 4, 2022 |
| Number of Pieces (per pack) | 150 |
| Special Feature | Accurate |
| Test Type | Blood Glucose Test |
| Specific Uses For Product | Blood, Blood Glucose Test, Glucose Test |
8. Warranty and Support
For general questions or technical support regarding McKesson Quintet AC Blood Glucose Test Strips, please use the contact information below:
- General Questions: Call 1-800-777-4908
- Technical Support: Call 1-888-481-8485
McKesson Medical-Surgical Inc. distributes this product. For detailed warranty information, please refer to the documentation included with your McKesson QUINTET AC Blood Glucose Monitoring System or contact McKesson directly.
