Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new Delta Woodhurst Single Hole Bathroom Faucet. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Keep this manual for future reference.
Figure 1: Delta Woodhurst Single Hole Bathroom Faucet, Stainless Finish
Safety Information
Always observe all local plumbing and building codes. Turn off the main water supply before beginning any work. Wear safety glasses during installation. If you are unsure about any part of the installation process, consult a qualified plumber.
What's Included
- Faucet Assembly
- Deck Plate (Optional)
- Metal Push-Pop Drain Assembly
- Integrated Supply Lines
Tools Required for Installation
The following tools and supplies are recommended for a successful installation:
- Two (2) Wrenches (Adjustable)
- Safety Glasses
- Towel
- Pot or Bucket
- Flashlight (for dark spaces)
- Plumber's Tape (if replacing the drain)
- Silicone Sealant (for uneven sink surfaces)
Installation (Setup)
For a visual guide, please refer to the official installation video below. Ensure all water supply valves are turned off before proceeding.
Video 1: Official Installation Guide for Delta Woodhurst Single Handle Bathroom Faucet
This video demonstrates step-by-step mounting, supply line connection, and flushing procedures for the Delta Woodhurst Single Handle Bathroom Faucet.
Step-by-Step Instructions:
- Prepare the Sink: Ensure the sink surface is clean and dry. If your sink has multiple holes and you are using the optional deck plate, place it over the holes.
- Mounting the Faucet: Feed the integrated supply lines and mounting stud of the faucet through the center hole of the sink. If using the optional deck plate, ensure it is properly aligned. For single-hole installations, an escutcheon is not required. For 4-inch, 3-hole configurations, the included escutcheon plate is required to cover extra holes.
- Secure the Faucet: From underneath the sink, slide the mounting bracket and washer onto the mounting stud. Hand-tighten the nut to hold the faucet in place, then use the included wrench to fully tighten, ensuring the faucet is centered and stable.
- Connect Supply Lines: Connect the integrated InnoFlex PEX supply lines to your hot and cold water supply valves. The lines are color-coded (red for hot, blue for cold) for easy identification. Hand-tighten the connections, then use a wrench for a final quarter-turn to ensure a secure, leak-free seal.
- Install Drain Assembly: Install the metal push-pop drain assembly according to the instructions provided with the drain. Ensure all seals are properly seated to prevent leaks.
- Flush the Faucet: Before replacing the aerator, turn on the water supply and flush both hot and cold lines for approximately 30 seconds to clear any debris. Turn off the water, then re-install the aerator using the provided aerator wrench.
- Check for Leaks: Turn on the water supply again and check all connections for leaks. Tighten any leaking connections as needed.
Figure 2: Faucet Installation Options
Figure 3: InnoFlex PEX Supply Lines
Figure 4: Metal Push-Pop Drain Assembly
Operating Instructions
Your Delta Woodhurst faucet features a single handle for easy control of water temperature and flow, and a convenient push-pop drain.
Video 2: Delta Woodhurst Single Handle Bath Faucet Product Overview
This video provides a brief overview showcasing the design and features of the Delta Woodhurst Single Handle Bathroom Faucet.
- Water Flow and Temperature: Lift the handle to turn on the water. Move the handle left for hot water and right for cold water. Adjust the handle's position to achieve your desired temperature and flow rate.
- Push-Pop Drain: To close the drain and fill the sink, simply push down on the drain stopper. To open the drain and allow water to flow out, push down on the stopper again.
Maintenance
Regular cleaning and proper care will ensure the lasting beauty and performance of your Delta Woodhurst faucet.
- Cleaning the Faucet: Clean the faucet with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- DIAMOND Seal Technology: Your faucet features patented DIAMOND Seal Technology, which reduces leak points and is designed to last twice as long as the industry standard, ensuring leak-free operation for the life of the faucet.
- Corrosion-Resistant Finish: The Brilliance finish is engineered for durability and tested for corrosion resistance to at least 2 times industry standards, ensuring dependable use without cracking, peeling, chipping, blistering, or changing color over time.
- Easy-to-Clean Drain: The metal push-pop drain unscrews from above the deck for quick removal and easy cleaning of hair and other bathroom sink debris.
- WaterSense Certification: This faucet is WaterSense labeled, using at least 20% less water than the industry standard without compromising performance.
Figure 5: DIAMOND Seal Technology
Figure 6: WaterSense Certified
Troubleshooting
If you experience issues with your faucet, refer to the common problems and solutions below. For further assistance, contact Delta Customer Service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Debris in aerator or supply lines. | Remove and clean the aerator. Flush supply lines as per installation instructions. |
| Leaking from Faucet Base | Loose mounting nut or improper sealant. | Tighten the mounting nut from underneath the sink. Apply silicone sealant if necessary. |
| Water Temperature Issues | Incorrect supply line connection or valve issue. | Verify hot and cold supply lines are connected correctly. Check supply valves for full opening. |
| Drain Not Sealing/Opening | Debris in drain or improper assembly. | Remove and clean the push-pop drain assembly. Ensure all components are correctly installed. |
Specifications
Figure 7: Product Dimensions and Installation Information
| Feature | Detail |
|---|---|
| Brand | DELTA |
| Model Name | Woodhurst™ |
| Model Number | 532-SSMPU-DST |
| Color | Stainless |
| Finish Type | Brushed |
| Material | Zinc (Faucet Body), Ceramic (Handle) |
| Mounting Type | Deck Mount |
| Installation Type | Single Hole |
| Hole Count | 1 |
| Number of Handles | 1 |
| Maximum Flow Rate | 1.5 Gallons Per Minute |
| Spout Height | 5.38 Inches |
| Product Dimensions | 7"D x 6"W x 9.19"H |
| Item Weight | 3.89 Pounds |
| Included Components | Deck Plate, Drain, Faucet, Supply Lines |
| Special Feature | Long Lasting |
| UPC | 195205028437 |
Warranty
Delta faucets are backed by a Lifetime Faucet and Finish Limited Warranty. This warranty covers defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. For full warranty details, please refer to the documentation included with your product or visit the Delta Faucet website.
Figure 8: Lifetime Limited Warranty
Support
For questions, assistance, or to order replacement parts, please contact Delta Customer Service. Our highly trained customer care team is ready to help.
Phone: 1-800-345-DELTA (3358)
Figure 9: Delta Customer Service
You can also visit the official Delta Faucet website for additional resources and product information.
