Introduction
Thank you for choosing the Vente-unique VATELY Blue Fabric Armchair. This manual provides essential information for the safe assembly, proper use, and maintenance of your new armchair. Please read these instructions carefully before assembly and retain them for future reference.
Image: The VATELY armchair in blue fabric, showcasing its Scandinavian design with a high, tufted backrest and light wooden legs.
Safety Information
Important Safety Warning: This armchair has a maximum weight capacity of 120 kg (approximately 265 lbs). Do not exceed this limit to prevent damage to the armchair and to avoid the risk of injury. Always ensure the armchair is placed on a stable, level surface.
- Keep all assembly hardware out of reach of children.
- Do not stand on the armchair.
- Avoid exposing the armchair to direct sunlight or extreme temperatures to prevent fabric fading or material degradation.
- Do not use harsh chemicals for cleaning. Refer to the "Care and Maintenance" section.
Package Contents
Before beginning assembly, please verify that all components are present and undamaged. The package should contain:
- 1 x VATELY Armchair Body (backrest, seat, armrests integrated)
- 4 x Wooden Legs
- Assembly Hardware (screws, washers, Allen key)
- Instruction Manual (this document)
The armchair is delivered in one package with dimensions: Length 70 cm, Width 70 cm, Height 33 cm, Weight 11 kg.
Assembly Instructions
The VATELY armchair is designed for easy self-assembly. It is recommended to assemble the armchair on a soft, clean surface to prevent scratching the fabric or floor.
- Carefully unpack all components from the box.
- Identify the four wooden legs. Each leg may be slightly different; ensure they are oriented correctly before attaching.
- Locate the pre-drilled holes on the underside of the armchair body where the legs will attach.
- Align each wooden leg with its corresponding hole.
- Using the provided screws and Allen key, securely fasten each leg to the armchair body. Do not overtighten.
- Once all four legs are attached, gently turn the armchair upright.
- Ensure the armchair is stable and does not wobble. If it wobbles, check that all screws are tightened evenly. Some legs may have adjustable glides for leveling.
Image: Diagram illustrating the dimensions of the VATELY armchair, useful for planning placement and assembly.
Usage
The VATELY armchair is designed for comfortable seating in living rooms, bedrooms, or offices. Its high backrest provides good lumbar support.
- Use the armchair for sitting purposes only.
- Avoid sudden impacts or excessive force on the armchair.
- Do not allow children to climb or jump on the armchair.
Image: The VATELY armchair positioned in a modern living space, demonstrating its aesthetic appeal and how it complements interior decor.
Care and Maintenance
Proper care will extend the life and appearance of your VATELY armchair.
Fabric Care (100% Polyester)
- Regular Cleaning: Vacuum regularly using an upholstery attachment to remove dust and loose particles.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain. For stubborn stains, use a mild fabric cleaner specifically designed for polyester, testing on an inconspicuous area first.
- Avoid Harsh Chemicals: Do not use bleach, abrasive cleaners, or solvents, as these can damage the fabric.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading.
Image: A close-up view of the blue polyester fabric on the armchair's seat, highlighting its texture and quality.
Wooden Legs Care
- Wipe wooden legs with a soft, damp cloth. Dry immediately.
- Avoid excessive moisture.
- Do not use abrasive cleaners or furniture polish containing silicone.
Image: A detailed shot of the armchair's tufted backrest, showing the button detailing and the texture of the fabric.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Armchair wobbles after assembly. | Legs not tightened evenly or uneven floor. | Ensure all leg screws are tightened securely and evenly. If wobbling persists, check for adjustable glides on the bottom of the legs and adjust them to level the chair. |
| Seat feels too firm. | New foam padding requires breaking in. | The polyurethane foam padding has a density of 24 kg/m³ for the seat. The firmness will naturally soften with regular use over time. |
| Unpleasant chemical odor. | New product off-gassing. | This is common with new furniture. Ensure the room is well-ventilated. The odor should dissipate within a few days to a week. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | VATELY |
| Color | Blue |
| Material (Fabric) | 100% Polyester |
| Material (Legs) | Wood |
| Frame Structure | Plywood, Metal |
| Finish | Tufted backrest |
| Seating Capacity | 1 person |
| Seat Filling | Polyurethane foam (Density: 24 kg/m³) |
| Backrest Filling | Polyurethane foam (Density: 18 kg/m³) |
| Armrests | Included |
| Maximum Supported Load | 120 kg (approx. 265 lbs) |
| Overall Length | 69 cm (27.2 inches) |
| Overall Height | 95.5 cm (37.6 inches) |
| Overall Depth | 78 cm (30.7 inches) |
| Leg Height | 32 cm (12.6 inches) |
| Seat Height | 44 cm (17.3 inches) |
| Seat Depth | 46.5 cm (18.3 inches) |
| Assembly Required | Yes (Self-assembly) |
| Product Weight | 11.8 kg (26 lbs) |
Warranty and Support
Vente-unique is committed to customer satisfaction. For any questions, concerns, or support needs regarding your VATELY armchair, please contact Vente-unique customer service.
Vente-unique prides itself on a high customer satisfaction rate, having served over 3 million customers. While specific warranty details are not provided in this manual, please refer to your purchase documentation or the Vente-unique official website for warranty terms and conditions.
You can visit the official Vente-unique brand store for more information and support: Vente-unique Brand Store
