Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Lindby Rutger ceiling light. Please read these instructions carefully before installation and retain them for future reference. The Lindby Rutger ceiling light features a vintage design with a wooden canopy and a black lacquered metal cage-shaped shade, suitable for various interior spaces.
Figure 1: Lindby Rutger ceiling light in an interior setting.
Safety Information
Warning: Electrical installations should only be carried out by qualified electricians. Incorrect installation can lead to electric shock or fire. Always disconnect the main power supply before commencing any installation or maintenance work.
For detailed safety guidelines, please refer to the official safety document: Safety Information (PDF).
- Ensure the voltage supply matches the product specifications (230V).
- Do not exceed the maximum wattage for the bulb (60W).
- This product is designed for indoor use only (IP20 protection class).
- Keep away from water and moisture.
Package Contents
Upon unpacking, verify that all components are present and undamaged. The package should contain:
- 1 x Lindby Rutger Ceiling Light fixture
- Mounting hardware (screws, anchors)
- Instruction Manual
- Note: The light bulb is not included.
Specifications
| Feature | Specification |
|---|---|
| Brand | Lindby |
| Model Name | Rutger |
| Model Number | 9921026 |
| Material | Wood, Metal |
| Color | Black, Brown |
| Dimensions (L x W x H) | 34L x 34W x 33.4H cm |
| Bulb Base | E27 |
| Max Wattage | 60W |
| Voltage | 230V |
| IP Protection Class | IP20 (Indoor use) |
| Mounting Type | Ceiling Mount |
| Weight | 1.6 kg |
Figure 2: Product dimensions.
Installation Instructions
- Preparation:
- Before starting, ensure the main power supply to the installation area is switched off at the circuit breaker.
- Unpack all components and check against the package contents list.
- Gather necessary tools (e.g., screwdriver, drill, wire strippers, voltage tester).
- Mounting the Bracket:
- Position the mounting bracket on the ceiling at the desired location.
- Mark the drilling points through the holes in the bracket.
- Drill holes in the ceiling and insert appropriate wall anchors if necessary.
- Secure the mounting bracket to the ceiling using the provided screws.
Figure 3: View of the mounting plate and wiring.
- Electrical Connection:
- Connect the household electrical wires to the terminal block on the light fixture. Ensure correct polarity (Live, Neutral, Earth).
- Double-check all connections for security.
- Attaching the Fixture:
- Carefully align the light fixture with the mounting bracket.
- Secure the fixture to the bracket using the provided screws or fasteners.
Figure 4: Close-up of the ceiling attachment point.
- Installing the Bulb:
- Screw an E27 bulb (max 60W) into the lamp holder. For dimmable functionality, use a compatible dimmable E27 LED bulb.
- Final Check:
- Once installation is complete, restore power at the circuit breaker.
- Test the light fixture to ensure it functions correctly.
Operating Instructions
The Lindby Rutger ceiling light is operated via a standard wall switch. If a dimmable bulb is installed and connected to a compatible dimmer switch, you can adjust the light intensity.
- Switching On/Off: Use your wall switch to turn the light on or off.
- Dimming (if applicable): If you have installed a dimmable E27 bulb and connected the fixture to a compatible dimmer switch, rotate or press the dimmer switch to adjust the brightness.
Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Bulb Replacement:
- Ensure the power is off and the bulb has cooled down before attempting to replace it.
- Unscrew the old E27 bulb counter-clockwise.
- Screw in a new E27 bulb (max 60W) clockwise until secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Dimming does not work. |
|
|
Warranty and Support
Lindby products are manufactured to high-quality standards. For warranty information or technical support, please contact your retailer or the Lindby customer service department. Please have your model number (9921026) and proof of purchase ready when contacting support.
You can often find contact details on the Lindby official website or through your point of purchase.
