Introduction
This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Tylza Commercial Ice Maker. Please read this manual thoroughly before operating the appliance and retain it for future reference.
The Tylza Commercial Ice Maker (Model KM451) is designed for commercial and large household use, capable of producing up to 130 lbs of ice per 24 hours with a 35 lbs ice storage capacity. It features a durable stainless steel construction, an intelligent LCD control panel, and automatic functions for convenience.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons. This appliance is intended for commercial and household use only. Do not use outdoors.
- Ensure the appliance is properly grounded.
- Do not operate the ice maker with a damaged cord or plug.
- Keep ventilation openings clear of obstruction.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- Unplug the appliance before cleaning or performing any maintenance.
- Allow the machine to stand upright for at least 24 hours after transport before plugging it in.
Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your ice maker. This unit can be installed as a freestanding or built-in appliance. Ensure a water outlet is available for connection.
Unpacking and Initial Placement
Upon receiving the machine, please leave it alone for over 24 hours before starting it up. This allows the refrigerant to settle properly.
Image: Tylza Commercial Ice Maker with included accessories like an ice scoop and water hoses.
Removing Protective Film
The ice maker comes with a white scratch-resistant film to prevent damage during transportation. This film should be removed before use. A hairdryer can be used to gently heat the film for easier removal.
Video: Demonstrates how to quickly tear off the ice maker's white protective film using a hairdryer.
Water Inlet and Drain Hose Installation
Connect the water inlet hose to a potable water supply and the drain hose to a suitable drain. Ensure all connections are secure to prevent leaks.
Image: Connection points for water inlet, drain, and power.
Video: Instructions on how to quickly install a regulated water pressure valve.
Video: Guide on how to remove the water inlet hose from the ice machine.
Adjustable Feet
The ice maker is equipped with adjustable feet to ensure stability and proper leveling on uneven surfaces.
Video: Instructions on how to remove the adjustable feet from the ice machine.
Operating Instructions
Your Tylza ice maker is designed for user-friendly operation with its intelligent LCD control panel.
Control Panel Overview
The multi-function LCD panel allows you to control various settings, including ice cube thickness, timer, and auto-clean functions. It also provides reminders for ice full and water shortage conditions.
Image: Intelligent LCD Control Panel with various functions.
Ice Production
The ice maker can produce 45 pieces of ice in 11-20 minutes, with a daily production capacity of up to 130 lbs. The ice cube thickness can be adjusted to your preference.
Image: Commercial Grade Ice Maker features and ice production details.
Image: Custom Ice Cube Thickness options and their uses.
Video: Demonstrates how to separate sticky ice cubes.
Blue Light Feature
The ice maker includes a blue light inside the ice bin, allowing for easy observation of the ice cube condition. This light can be turned on or off via the control panel.
Video: Shows how to turn the blue light on/off in the ice machine.
Maintenance
Regular maintenance ensures the longevity and hygienic operation of your ice maker.
Auto-Clean Function
The ice maker is equipped with an auto-clean function for convenient internal cleaning. Refer to the control panel for initiating this cycle.
General Cleaning
Wipe down the exterior with a soft, damp cloth. For the interior, follow the auto-clean instructions and periodically clean the ice bin and water reservoir with a mild detergent and rinse thoroughly.
Troubleshooting
If you encounter issues with your ice maker, please refer to the following common problems and solutions. For more complex issues, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice. | No water supply, clogged water filter, low refrigerant, machine not powered on. | Check water connection, replace filter, ensure power, contact support if issue persists. |
| "Water Shortage" indicator on. | Insufficient water supply. | Ensure water supply is connected and turned on. |
| Ice cubes are too small or too large. | Ice thickness setting needs adjustment. | Adjust ice thickness using the control panel. |
| Ice melting quickly in the bin. | Ambient temperature too high, door not sealed properly. | Ensure proper ventilation, check door seal, avoid frequent opening. |
For further assistance, please refer to the official user manual PDF available here.
Specifications
| Feature | Detail |
|---|---|
| Brand | Tylza |
| Model Name | KM45-O |
| Item Model Number | KM451 |
| Product Dimensions | 17"D x 15"W x 31.5"H |
| Capacity (Ice Storage) | 35 Pounds |
| Ice Production (24H) | Up to 130 LBS |
| Wattage | 300 watts |
| First Available Date | April 1, 2022 |
What's in the Box
- 1 × Commercial Ice Maker
- 1 × Drain Pipe
- 1 × Water Inlet Pipe
- 1 × Ice Scoop
Warranty and Support
Tylza offers a 12-month warranty and lifetime technical support for this ice maker. If you have any questions or require assistance, please feel free to contact us through Amazon.
Protection Plans
Additional protection plans are available for extended coverage:
- 2-Year Protection Plan: $129.99
- 3-Year Protection Plan: $192.99
- Complete Protect: $16.99/month (Covers all eligible past and future purchases)
