Liquipel Powertek Dual USB-A Wall Charger

Introduction

This instruction manual provides essential information for the safe and efficient use of your Liquipel Powertek Dual USB-A Wall Charger. Please read this manual thoroughly before operating the device and retain it for future reference.

Front view of the Liquipel Powertek Dual USB-A Wall Charger in green, showcasing its compact design and two USB-A ports.

Product Features

• Dual USB-A Ports: Allows charging of two devices simultaneously.
• Foldable Prongs: For compact storage and portability.
• Beveled Edges: Ergonomic design.
• Compact Design: Ideal for travel and everyday use.
• Input Voltage: 120 Volts.
• Output Current: 2 Amps per port (total shared output).

Setup

1. Unfold Prongs: Gently pull out the foldable prongs from the charger body until they lock into place.
2. Connect to Power Outlet: Insert the charger's prongs into a standard 120V AC wall outlet.
3. Connect Devices: Plug your USB charging cables (not included, except for 1 USB cable as specified in the box) into the USB-A ports on the charger. Connect the other end of the cables to your compatible devices (e.g., cellular phones, tablets, smartwatches, laptops).

Diagram showing the dimensions (41mm height, 26mm width, 46mm depth) and the folding prong mechanism of the Liquipel Powertek Dual USB-A Wall Charger, along with icons indicating dual USB ports and 2.4 Amps output.

Operating Instructions

Once connected, the charger will automatically begin supplying power to your devices. No additional steps are required for operation.

• Ensure your devices are compatible with USB-A charging.
• For optimal charging, use high-quality USB cables.
• The charger is designed to provide a stable charge to connected devices.

An image displaying multiple Liquipel Powertek Dual USB-A Wall Chargers in various pastel colors, with one purple charger plugged into a wall outlet.

Maintenance

• Cleaning: Disconnect the charger from the power outlet before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or aerosols.
• Storage: When not in use, fold the prongs for compact storage. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Avoid dropping the charger or subjecting it to strong impacts.

Troubleshooting

• Device not charging:
  • Ensure the charger is securely plugged into a working wall outlet.
  • Check that the USB cable is properly connected to both the charger and your device.
  • Try using a different USB cable to rule out cable malfunction.
  • Test the charger with a different device to confirm charger functionality.
• Slow charging:
  • Ensure your device is not running power-intensive applications while charging.
  • Verify that the USB cable is not damaged and is suitable for fast charging if your device supports it.
  • Charging two devices simultaneously may result in slightly slower charging speeds for each device compared to charging a single device.
• Charger is hot:
  • It is normal for the charger to become warm during operation. If it becomes excessively hot, disconnect it immediately and contact support.

Specifications

A comparison table detailing features of the Powertek Dual Wall Block Charger against standard and value wall block chargers.

Warranty and Support

For warranty information and customer support, please refer to the official Liquipel website or contact the retailer where the product was purchased. Keep your proof of purchase for warranty claims.

Important Safety Information

• Do not expose the charger to liquids, moisture, or extreme temperatures.
• Do not disassemble or attempt to repair the charger yourself.
• Keep out of reach of children.
• Use only with compatible devices and within specified voltage limits.
• Disconnect the charger from the power outlet when not in use.