Xllent [MULTIPLE]
USB-C Charging Cable User Manual
Brand: Xllent | Model Compatibility: Tzumi FitRx 7631, 7773, 7610, 8405, DDP003109
Introduction
This manual provides essential information for the proper use and maintenance of your Xllent USB-C Charging Cable. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
This USB-C cable is designed for 5V charging and data synchronization, compatible with various devices, including specific Tzumi FitRx models such as the Model 7631 On-The-Go Massager, 7773 Fit Rx Pro, 7610, 8405, and DDP003109 Handheld Deep Tissue Percussion Multi-Angle Massage Guns.
Product Overview
Figure 1: The Xllent USB-C to USB-A charging cable, illustrating the distinct USB-A connector on one end and the reversible USB-C connector on the other. This design allows for connection to standard USB-A power adapters or computer ports and USB-C compatible devices.
Figure 2: The Xllent USB-C charging cable in a coiled state, demonstrating its flexible and durable construction. This image highlights the cable's overall length and material quality, suitable for everyday use and storage.
Setup
To set up your Xllent USB-C Charging Cable, follow these simple steps:
- Identify Connectors: Locate the USB-A end (rectangular) and the USB-C end (smaller, oval, reversible) of the cable.
- Connect to Power Source: Insert the USB-A end of the cable into a compatible 5V USB power adapter, a computer's USB-A port, or a power bank. Ensure the connection is firm.
- Connect to Device: Insert the USB-C end of the cable into the charging port of your compatible device. This includes Tzumi FitRx models such as 7631, 7773, 7610, 8405, and DDP003109 massage guns. The USB-C connector is reversible, so it can be inserted in either orientation.
- Verify Connection: Confirm that both ends of the cable are securely connected. Your device should indicate that it is charging or connected for data transfer.
Note: Always use a power source that matches the voltage requirements of your device (typically 5V for these types of cables) to prevent damage.
Operating Instructions
The Xllent USB-C Charging Cable serves two primary functions: charging and data synchronization.
Charging Your Device
- Connect the USB-A end to a 5V power adapter or a powered USB port.
- Connect the USB-C end to your compatible device (e.g., Tzumi FitRx massager).
- The device's charging indicator should activate, signifying that charging is in progress.
- Once the device is fully charged, disconnect the cable from both the device and the power source.
Data Synchronization
- Connect the USB-A end to a USB-A port on your computer.
- Connect the USB-C end to your compatible device.
- Your computer should recognize the connected device, allowing for data transfer or device management as supported by your device.
Important: This cable is designed for 5V DC power. Using it with incompatible voltage sources may damage the cable or your device.
Maintenance
Proper care and maintenance will extend the life of your Xllent USB-C Charging Cable:
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable at sharp angles, especially near the connectors, as this can damage internal wires.
- Cleaning: If the cable or connectors become dirty, gently wipe them with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
- Handling: Always grasp the connector head when plugging or unplugging the cable, rather than pulling on the cable itself. This prevents strain on the wire-to-connector joint.
- Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the insulation or connectors. Discontinue use if any damage is observed.
Troubleshooting
If you encounter issues with your Xllent USB-C Charging Cable, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging. | Loose connection, faulty power source, incompatible device. | Ensure both ends of the cable are securely plugged in. Try a different USB power adapter or computer port. Verify your device is listed as compatible. |
| Slow charging. | Low power output from source, background device activity. | Use a higher amperage 5V power adapter. Close unnecessary applications on your device. |
| Cable appears damaged. | Physical wear and tear. | Discontinue use immediately. Replace the cable with a new one. |
| Device not recognized for data transfer. | Loose connection, driver issues on computer, device settings. | Ensure secure connection. Restart your computer and device. Check device settings for USB connection mode (e.g., "File Transfer" or "MTP"). |
If the problem persists after attempting these solutions, please contact the seller or manufacturer for further assistance.
Specifications
- Brand: Xllent
- Connector Type: USB-A to USB-C
- Cable Type: USB Charging & Data Sync Cable
- Voltage: 5V DC
- Compatible Devices: Tzumi FitRx Model 7631 On-The-Go Massager, Tzumi FitRx Pro 7773, 7610, 8405, DDP003109 Handheld Deep Tissue Percussion Multi-Angle Massage Guns, and other devices requiring 5V USB-C charging/data.
- Manufacturer: Shenzhen Waweis Technology Co., Ltd
- First Available Date: March 31, 2022
Warranty and Support
Specific warranty information for this Xllent USB-C Charging Cable is not provided in the product details. For warranty claims or detailed support, please refer to the purchase documentation or contact the seller directly.
Seller: TATMALL
For general inquiries or technical assistance, you may also attempt to contact the manufacturer:
Manufacturer: Shenzhen Waweis Technology Co., Ltd
Please retain your proof of purchase for any warranty or support requests.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.