1. Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your PERLESMITH TV Wall Mount. This product is designed to securely mount flat panel televisions to various wall types, offering both full-motion and fixed mounting solutions.
The PERLESMITH PSMFK1 is a full-motion articulating TV wall mount suitable for 26-60 inch TVs weighing up to 70 lbs, with VESA patterns up to 400x400mm. It offers extensive adjustability including swivel, tilt, and extension.
The PERLESMITH PSML1 is a fixed TV wall mount designed for most 26-60 inch TVs weighing up to 115 lbs, with VESA patterns up to 400x400mm. It provides a low-profile, secure mounting solution.
2. Safety Information
WARNING: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.
- Do not install on walls that are not strong enough to support the combined weight of the mount and the television.
- Ensure the wall structure can support at least four times the weight of the TV and mount combined.
- Always use a stud finder to locate wood studs accurately. Do not drill into electrical wires or plumbing.
- Do not exceed the maximum weight capacity of 70 lbs for PSMFK1 and 115 lbs for PSML1.
- This product is intended for indoor use only.
- Use only the provided mounting hardware. If your installation hardware is not listed, please contact customer service.
- Always have at least two people for installation to prevent injury or damage.
3. Package Contents
Please verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact PERLESMITH customer service.
- Wall Plate Assembly (PSMFK1 or PSML1)
- TV Brackets (2x)
- Mounting Hardware Kit (various screws, anchors, washers, spacers)
- Bubble Level
- HDMI Cable (may be included)
- Instruction Manual
4. Setup and Installation
4.1 Pre-Installation Checks
- Check TV VESA Pattern: Ensure your TV's VESA mounting holes (on the back of the TV) are compatible with the mount. Compatible VESA patterns include 75x75mm, 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, and 400x400mm.
- Check TV Weight: Confirm your TV's weight does not exceed 70 lbs for PSMFK1 or 115 lbs for PSML1.
- Identify Wall Type: This mount is compatible with single wood studs, concrete walls, and brick walls. DO NOT install on drywall alone.
4.2 Installation Steps
- Attach TV Brackets to TV: Carefully place your TV face down on a soft, clean surface. Align the TV brackets with the VESA mounting holes on the back of your TV. Use the appropriate screws, washers, and spacers from the hardware kit to secure the brackets. Ensure the brackets are level and securely fastened.
- Mark Wall Drilling Points: Hold the wall plate against the wall at your desired TV height and position. Use the integrated bubble level to ensure it is perfectly horizontal. Mark the drilling points through the holes on the wall plate.
- Drill Pilot Holes:
- For Wood Stud Installation: Use a stud finder to locate the center of the wood stud(s). Drill pilot holes using a 5/32 inch (4mm) drill bit.
- For Concrete/Brick Wall Installation: Drill pilot holes using a 3/8 inch (10mm) masonry drill bit. Insert concrete anchors into the drilled holes until they are flush with the wall surface.
- Attach Wall Plate to Wall: Align the wall plate with the drilled holes. Secure the wall plate to the wall using the appropriate lag bolts and washers. Tighten all bolts firmly, but do not overtighten.
- Hang TV on Wall Plate: With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV brackets are properly seated on the wall plate.
- Secure TV to Mount: For PSML1, use the safety screws or locking mechanism to secure the TV brackets to the wall plate, preventing accidental dislodgement. For PSMFK1, ensure all articulating arms are securely tightened after positioning.
5. Operating the Mount (PSMFK1 Full Motion Only)
The PSMFK1 full-motion mount offers flexible viewing options. The PSML1 fixed mount does not offer these adjustments.
- Swivel: The mount allows for a +/-90° swivel (maximum angle depends on TV size) to adjust the viewing angle from different positions in the room. Gently push or pull the TV to the desired swivel angle.
- Tilt: You can tilt the TV from +5° to -15° to reduce glare or achieve an optimal viewing angle. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired tilt, and then re-tighten the knobs.
- Extension: The articulating arm can extend the TV up to 18.3 inches from the wall, providing greater flexibility for viewing and access to cables.
- Level Adjustment: A +/-3° level adjustment feature allows for fine-tuning the TV's horizontal position after installation.
6. Maintenance
Regular maintenance ensures the longevity and safety of your TV wall mount.
- Check Connections: Periodically (e.g., every 6 months) check all screws and bolts to ensure they remain tight and secure. Re-tighten if necessary.
- Clean Mount: Wipe the mount with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Inspect for Damage: Visually inspect the mount for any signs of wear, corrosion, or damage. If any damage is observed, discontinue use and contact customer service.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level after installation. | Wall plate or TV brackets are not perfectly horizontal. | For PSMFK1, use the +/-3° level adjustment feature. For both models, slightly loosen wall plate bolts, adjust with a level, and re-tighten. |
| Mount feels loose or unstable. | Mounting bolts are not sufficiently tightened, or wall structure is inadequate. | Ensure all wall plate and TV bracket bolts are securely tightened. Verify wall type and stud location. If unsure, consult a professional. |
| TV does not fit the mount. | Incorrect VESA pattern or TV weight exceeds capacity. | Check your TV's VESA pattern against the mount's compatibility (75x75mm to 400x400mm). Verify TV weight is within the mount's capacity (70 lbs for PSMFK1, 115 lbs for PSML1). |
| Difficulty with full motion adjustments (PSMFK1). | Joints are too tight or cables are snagged. | Check for any cable obstructions. Apply a small amount of silicone lubricant to moving joints if they are stiff. Do not force movement. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | PERLESMITH |
| Models | PSMFK1 (Full Motion), PSML1 (Fixed) |
| Mounting Type | Wall Mount |
| Movement Type (PSMFK1) | Swivel, Tilt, Articulating |
| Material | Alloy Steel |
| Compatible TV Sizes | 26 - 60 Inches |
| Weight Capacity (PSMFK1) | Up to 70 lbs (31.75 kg) |
| Weight Capacity (PSML1) | Up to 115 lbs (52.16 kg) |
| VESA Compatibility | 75x75mm, 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm |
| Tilt Angle (PSMFK1) | +5° to -15° (Max Tilt Angle: 16.6 Degrees from specs) |
| Swivel Angle (PSMFK1) | +/-90° (max. angle depends on TV size) |
| Extension from Wall (PSMFK1) | Up to 18.3 inches |
| Level Adjustment (PSMFK1) | +/-3° |
9. Warranty and Support
For warranty information, please refer to the product packaging or the official PERLESMITH website. PERLESMITH stands behind its products and offers customer support for any questions or issues you may encounter.
If you require assistance, please contact PERLESMITH customer service through their official channels. When contacting support, please have your product model (PSMFK1 or PSML1) and purchase information ready.