Introduction
The ZURU ROBO Alive Lurking Lizard Series 3 Green is a robotic toy designed to mimic the rapid movement of a real lizard. This manual provides essential information for setting up, operating, and maintaining your new robotic pet.
Image: The ZURU ROBO Alive Lurking Lizard Series 3 Green, showcasing its vibrant green color and frilled neck.
Safety Information
WARNING: This product contains small parts which may pose a choking hazard. Not suitable for children under 3 years of age. Adult supervision is recommended during play.
What's in the Box
- 1 x ROBO ALIVE LURKING LIZARD SERIES 3 GREEN
Image: The ZURU ROBO Alive Lurking Lizard Series 3 Green shown in its retail packaging.
Setup
Battery Installation
- Locate the battery compartment on the underside of the lizard.
- Using a small screwdriver, open the battery compartment cover.
- Insert 2 x AA batteries, ensuring correct polarity (+/-).
- Securely close the battery compartment cover with the screwdriver.
Image: The underside of the ZURU ROBO Alive Lurking Lizard, highlighting the battery compartment and on/off switch.
Operating Instructions
- Power On: Locate the ON/OFF switch on the lizard's underside and slide it to the "ON" position.
- Movement: Once powered on, the lizard's hind legs will activate, causing it to sprint forward with realistic, rapid movements. Its lifelike rubber tail will also wiggle as it moves.
- Light-Up Mouth: The Series 3 Lurking Lizard features a light-up LED mouth, which activates during operation.
- Pausing Movement: To temporarily pause the lizard's movement, gently tilt its head upwards. This action will stop the running, allowing you to pick it up.
- Optimal Surface: For best performance, operate the lizard on hard, flat surfaces such as hardwood floors. While it can move on shorter pile carpets, its speed and movement may be reduced.
- Power Off: To conserve battery life, always slide the ON/OFF switch to the "OFF" position when not in use.
Maintenance
Cleaning
Wipe the lizard with a damp cloth to remove dust or dirt. Do not submerge the toy in water, as this may damage the electronic components.
Battery Replacement
When the lizard's movement becomes sluggish or the lights dim, it's time to replace the batteries. Follow the battery installation steps in the "Setup" section.
Troubleshooting
| Problem | Solution |
|---|---|
| Lizard does not move or lights do not work. |
|
| Lizard moves slowly or gets stuck. |
|
Specifications
- Model Number: 38508
- Product Dimensions: 4.29 x 14.06 x 2.36 inches
- Item Weight: 12.5 ounces
- Recommended Age: 3 years and up
- Batteries: 2 AA batteries required (not included)
- Manufacturer: Zuru
Warranty and Support
For warranty information or product support, please refer to the contact details provided on the product packaging or visit the official ZURU website. Keep your purchase receipt as proof of purchase.
