1. Introduction
This user manual provides essential information for the safe and effective use of your PowerSmart Li-Ion battery. Please read this manual thoroughly before using the battery to ensure optimal performance and longevity.
2. Product Overview
The PowerSmart Li-Ion battery is designed to provide reliable power for compatible Ryobi power tools. Key features include:
- Battery Type: Li-Ion
- Voltage: 14.40 V
- Capacity: 2000 mAh (29 Wh)
- Number of Cells: 4
- Dimensions: 113.80 x 82.00 x 88.20 mm
3. Compatibility
This PowerSmart Li-Ion battery is compatible with various Ryobi power tools and replaces several original part numbers. Please verify your tool model or existing battery part number for compatibility.
3.1 Compatible Part Numbers:
- 1311166, 1314702, 1322547, 1400144, 1400655, 1400656, 1400669, 1400670, 1400671, 4400011, 130111073, 130171003, 130224010, 130224011, 130224017, 130224024, 130240010, 130281002, 5133001102, B-1445T, BPP-1420, BPL1414, BPL-1414, BPP-1413, BPP-1415, BPP-1417.
3.2 Compatible Ryobi Tool Models:
- BID-1821m, BIW180, BIW180M, CBI-1442D, CCD-1441, CCG-1801M, CDD144V22, CDD-144V22, CDDI14022NF, CDDI-14022NF, CDI-1440, CDL-1441P, CDT-144, CHD1441, CHD-1441, CHD1442, CHD-1442, CHI-1441, CHI-1442, CHI-1442P, CID-1442P, CMD-1442, CTH-1422K2, CTH-1442, CTH1442, CTH-1442K2, CTH1442K2, DI-1443, FL1400, FL1400, HP1441, HP-1441, HP1441M, HP-1441M, HP1441MK2, HP-1441MK2, HP1442M, HP-1442M, HP1442MK2, HP-1442MK2, HP7200K2, HP-7200K2, HP7200MK2, HP-7200MK2, HP7200NK2, HP-7200NK2, LCD1402, LCD14021, LCD14022, LCDI14022, LCDI1402, LCDI1402, LCDI14021, LCD-I14022, LCDI14022, LCDI14022B, LLCD1402, LLCD14021, LLCD14022, R10520, R10520, R10521, R1-0521, RY1420, RY-1420, RY62, RY 62, RY6200, RY 6200, RY6201, RY 6201, RY6202, RY 6202, STPP-1441.
4. Specifications
| Attribute | Value |
|---|---|
| Brand | PowerSmart |
| Model Number | TRY050.86D_6 |
| Battery Type | Li-Ion |
| Voltage | 14.4 Volts |
| Capacity | 2000 mAh (29 Wh) |
| Number of Cells | 4 |
| Dimensions | 113.80 x 82.00 x 88.20 mm |
| Reusability | Rechargeable |
| Amperage | 4 A |
5. Setup
5.1 Initial Charging
Before first use, fully charge the battery. This helps to condition the battery for optimal performance and longevity.
5.2 Charging Process
- Ensure you are using a charger specifically designed for Li-Ion batteries. This battery is a Li-ion battery and can only be charged by Li-ion chargers.
- Note: This battery is not suitable for the BC-1440 charger. Using an incompatible charger may damage the battery or charger, and poses a safety risk.
- Insert the battery into the compatible Li-Ion charger, ensuring it clicks securely into place.
- Connect the charger to a power outlet.
- Monitor the charger's indicator lights for charging status. Refer to your charger's manual for specific light patterns.
- Once fully charged, disconnect the charger from the power outlet and remove the battery.
5.3 Installing the Battery into a Tool
- Ensure the power tool is turned off and disconnected from any power source (if applicable).
- Align the battery with the battery slot on the power tool.
- Slide the battery into the slot until it clicks securely into place. A click indicates that the battery is properly seated and locked.
- To remove the battery, press the release button(s) on the battery or tool and slide the battery out.
6. Operating
Once the battery is fully charged and installed in a compatible Ryobi tool, the tool is ready for operation according to its own user manual. Always refer to your tool's manual for specific operating instructions and safety guidelines.
- Battery Life: The actual runtime of the battery will vary depending on the tool, the task, and the intensity of use.
- Over-discharge Protection: Modern Li-Ion batteries often include protection circuits to prevent over-discharge, which can damage the battery. If your tool stops working unexpectedly, the battery may be depleted.
7. Maintenance
7.1 Cleaning
Keep the battery terminals clean and free of debris. Use a clean, dry cloth to wipe down the battery. Do not use solvents or abrasive cleaners.
7.2 Storage
- Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
- For long-term storage, it is recommended to store Li-Ion batteries at approximately 50% charge.
- Avoid storing batteries in areas where they may be exposed to moisture or corrosive materials.
7.3 Battery Care Tips
- Do not expose the battery to water or rain.
- Do not drop, puncture, or disassemble the battery.
- Avoid charging or operating the battery in temperatures outside the recommended range (typically 0°C to 45°C for charging, -20°C to 60°C for discharge).
- Do not short-circuit the battery terminals.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging. | Incompatible charger; poor connection; charger or battery fault. | Ensure charger is for Li-Ion batteries and not BC-1440. Check connections. Try another compatible battery/charger if available to isolate the issue. |
| Battery not holding charge. | Battery nearing end of life; improper charging/storage; extreme temperatures. | Ensure proper charging and storage conditions. If battery is old, it may need replacement. |
| Battery not fitting into tool. | Incorrect battery model; debris in tool slot. | Verify tool model compatibility. Clean tool battery slot. Do not force the battery. |
9. Safety Information
Always observe the following safety precautions when handling and using the battery:
- Do not disassemble, open, or shred battery cells or packs.
- Do not expose the battery to heat or fire. Avoid storage in direct sunlight.
- Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials.
- Do not remove a battery pack from its original packaging until required for use.
- Do not subject battery packs to mechanical shock.
- In the event of a battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Do not use any charger other than that specifically provided for use with the equipment.
- Do not use any battery pack which is not designed for use with the equipment.
- Keep battery packs out of the reach of children.
- Seek medical advice immediately if a cell or battery has been swallowed.
- Keep battery packs clean and dry.
- Wipe the battery pack terminals with a clean dry cloth if they become dirty.
- Recharge battery packs before use.
- Do not leave a battery pack on charge when not in use.
- Do not store battery packs in temperatures exceeding 60°C (140°F).
- Dispose of batteries properly at designated collection points. Do not dispose of batteries in household waste.
10. Warranty and Support
Specific warranty information for this PowerSmart battery is not provided in the product data. For details regarding warranty coverage, returns, or technical support, please contact the seller or manufacturer directly. Retain your proof of purchase for any warranty claims.
For further assistance, you may refer to the official PowerSmart website or contact their customer service.